Filter by
Container Type
For Use On
Trade Name
Maximum Temperature
Manufacturer
Synthetic Oil Composition
Base Oil
Minimum Temperature
For Use With
Container Size
Environment
Food Industry Standard
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Seal and O-Ring Grease
 |
Pail |
 |
Tube |
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
Grease lubricates most efficiently within the listed temperature range.
Jet-Lube Ezy-Open Liquid—Jet-Lube Ezy-Open is a grease-like liquid that contains detergent and PTFE additives to clean more effectively than grease while it lubricates. Since it is a liquid, it does not have a NLGI viscosity grade, but is less viscous than anything else in our offering.
Krytox™ RFE PFPE LB 8209—Loctite® Krytox™ RFE PFPE LB 8209 handles extreme temperature swings, resists acids, bases, and fuels, and is long lasting. It can be used under high loads.
Barium Thickener—Grease with barium thickener is for use with silicone rubber O-rings and seals in open systems.
Lithium Thickener—Grease with lithium thickener offers good heat and moisture resistance.
PTFE Thickener—Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Silica Thickener—Grease with silica thickener resists washing off and reduces corrosion in wet environments.
1 NLGI Grade—NLGI 1 is about the consistency of tomato paste.
2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.
Mineral Oil Base—Mineral-oil-based grease, derived from petroleum, is more economical than synthetic-oil-based grease.
Synthetic Oil Base—Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
PTFE Additive—Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity.
Zinc Alloy Additive—Grease with zinc alloy neutralizes acid and is a good replacement for leaded grease.
Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Temp., ° F | Each | Package | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Consistency Grade | Base Oil | Additive | Size, fl. oz. | Net Wt., lb. | Type | Min. | Max. | Melting Temp., ° F | Color | Each | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loctite® Krytox™ RFE PFPE LB 8209—PTFE Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Synthetic Oil | — | 2 | — | Tube | -15 | 500 | Not Rated | White | 1821A51 | 000000 | — | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jet-Lube Ezy-Open Liquid—Silica Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| — | Synthetic Oil | PTFE | — | 35 | Pail | -10 | 400 | Not Rated | Amber | 8150T42 | 000000 | — | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lubriplate Aero—Lithium Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 1 | Mineral Oil | Zinc Alloy | 1.8 | — | Tube | -70 | 250 | 380 | Off-White | 8150T37 | 0000 | 36 | 8150T371 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Barium Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Mineral Oil | — | 4 | — | Tube | 0 | 300 | 410 | Amber | 9463K23 | 00000 | 24 | 9463K231 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Assembly Lubricants
 |
Jar |
 |
Aerosol Can |
Coat tight-fitting metal parts, such as gears, clutches, and press-fit assemblies, with these lubricants before sliding them together to make assembly easier. Once assembled, they provide initial lubrication in equipment before oil has a chance to flow.
For hoses and other tight-fitting parts, apply these lubricants to rubber or plastic before assembling and disassembling. After drying, they lose their lubricity, so parts stay together. They leave no residue on assembled parts.
Mineral Oil Base—Mineral-oil-based lubricants, derived from petroleum, are more economical than synthetic-oil-based lubricants.
Synthetic Oil Base—Synthetic-oil-based lubricants last longer than mineral-oil-based lubricants.
DuPont Molykote G-Rapid Plus Paste—Molykote G-Rapid Plus Paste is often used to assemble threaded spindles, gears, screws, and pumps. It can be used as an initial lubricant and has a high load-carrying capacity.
DuPont Molykote G-Rapid Plus Spray—Molykote G-Rapid Plus Spray has a high load-carrying capacity.
DuPont Molykote M-77 Paste—Molykote M-77 Paste is commonly used on brakes and clutches; it is compatible with material that is damaged by mineral oil, such as natural rubber, SBR, and EPDM. As a paste it lubricates to 445° F; after drying, it continues to lubricate at temperatures up to 660° F. It has a high load-carrying capacity.
Graphite Additive—Lubricants with graphite have additional pressure resistance and excellent temperature resistance.
Molybdenum Disulfide Additive—Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance.
Container | Each | Package | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Wt., oz. | Type | Additive | Temperature Range | For Use With | Each | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mineral Oil Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuPont Molykote G-Rapid Plus Paste | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8.8 | — | Jar | Graphite, Molybdenum Disulfide | -30° F to 840° F | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 2269N4 | 000000 | 10 | 2269N8 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuPont Molykote G-Rapid Plus Spray | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| — | 17.28 | Aerosol Can | Graphite, Molybdenum Disulfide | -30° F to 750° F | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 2269N5 | 00000 | 12 | 2269N9 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Synthetic Oil Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuPont Molykote M-77 Paste | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 33.3 | — | Jar | Molybdenum Disulfide | -50° F to 750° F | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 2269N3 | 000000 | 12 | 2269N7 | 00000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemical-Resistant Seal and O-Ring Grease
|  |
Tube | Grease Gun Cartridge |
Fluorocarbon and fluoropolymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
Grease lubricates most efficiently within the listed temperature range.
2.5 NLGI Grade—NLGI 2.5 is between the consistencies of peanut butter and vegetable shortening.
3 NLGI Grade—NLGI 3 is about the consistency of vegetable shortening.
Molybdenum Disulfide Additive—Grease with molybdenum disulfide has excellent resistance to wear and can withstand high-load and high-pressure applications.
PTFE Additive—Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. It’s not for use with ketones, such as acetone and MEK.
Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Temp., ° F | Each | Package | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Consistency Grade | Base Oil | Additive | Size, fl. oz. | Type | Min. | Max. | Melting Temp., ° F | Color | Each | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuPont Molykote 3452 Chemical Resistant—Fluorocarbon Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2.5 | Synthetic Oil | Molybdenum Disulfide | 3.5 | Tube | -20 | 450 | 570 | White | 1252K67 | 0000000 | 10 | 1252K671 | 000000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2.5 | Synthetic Oil | Molybdenum Disulfide | 19.4 | Grease Gun Cartridge | -20 | 450 | 570 | White | 1252K66 | 000000 | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fluoropolymer Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 | Synthetic Oil | PTFE | 3.5 | Tube | -20 | 450 | 570 | White | 1252K71 | 00000 | 12 | 1252K72 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Moisture-Resistant Seal and O-Ring Grease
 |
Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
Grease lubricates most efficiently within the listed temperature range.
3 NLGI Grade—NLGI 3 is about the consistency of vegetable shortening.
Food and Beverage Grease
|  |
Tube | Grease Gun Cartridge |
Use this grease in food-processing and preparation areas.
Grease lubricates most efficiently within the listed temperature range.
Krytox™ GPL 206—Chemours Krytox™ GPL 206 resists aggressive chemicals and is long lasting with an indefinite shelf life.
PTFE Thickener—Grease with PTFE thickener has good heat, moisture, and oxidation resistance.
Silica Thickener—Grease with silica thickener has excellent heat and moisture resistance and good oxidation resistance.
2 NLGI Grade—NLGI 2 is about the consistency of peanut butter.
Synthetic Oil Base—Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures.
Nonmelting—Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
NSF Registered H1—Grease that is NSF Registered H1 is rated for incidental contact with food.
NSF/ANSI 61—Grease that meets NSF/ANSI 61 is certified for use with components that come into contact with drinking water.
Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Temp., ° F | Each | Package | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Consistency Grade | Base Oil | Size, fl. oz. | Type | Min. | Max. | Melting Temp. | Color | Food Industry Std. | Each | Pkg. Qty. | Pkg. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemours Krytox™ GPL 206—PTFE Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Synthetic Oil | 0.5 | Tube | -30 | 500 | Nonmelting | White | NSF Registered H1 | 10195K111 | 000000 | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Synthetic Oil | 2 | Tube | -30 | 500 | Nonmelting | White | NSF Registered H1 | 10195K311 | 00000 | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Synthetic Oil | 8 | Tube | -30 | 500 | Nonmelting | White | NSF Registered H1 | 10195K511 | 000000 | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Synthetic Oil | 14 | Grease Gun Cartridge | -30 | 500 | Nonmelting | White | NSF Registered H1 | 10195K331 | 000000 | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Silica Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2 | Synthetic Oil | 8 | Tube | -40 | 400 | Nonmelting | White | NSF/ANSI 61 | 2982K22 | 00000 | 12 | 2982K221 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Assembly Lubricants for Food and Beverage
 |
Can |
For use in food-processing and preparation areas, these lubricants are rated for incidental food contact. Coat tight-fitting parts with them before sliding together to make assembly easier.
Mineral Oil Base—Mineral-oil-based lubricants have a high load-carrying capacity and can lubricate sliding loads at low-to-medium speeds.
Container | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Net Wt., lb. | Type | Temperature Range | Food Industry Std. | For Use With | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mineral Oil Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuPont Molykote P-1900 Anti-Seize Paste | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 2.2 | Can | -20° F to 570° F | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 2281N1 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemical-Resistant Oil
 |
This oil is chemically inert and long lasting with an indefinite shelf life.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Viscosity Grade | Container | Temp., ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ISO | AGMA | SAE | SSU @ Temp. | Size, fl. oz. | Type | Min. | Max. | Color | With Detergent | 1-3 | 4-Up | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemours Krytox™ GPL 106—Synthetic Oil Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 220 | 5 | 50 | 1,250 SSU @ 100° F | 9 | Bottle | -30 | 500 | Clear | No | 10195K2 | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemours Krytox™ GPL 107—Synthetic Oil Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 460 | 7 | — | 2,320 SSU @ 100° F | 9 | Bottle | -20 | 550 | Clear | No | 10195K3 | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Food and Beverage Oil
|
Bottle |
Use this oil in food-processing and preparation areas.
Viscosity is the thickness of an oil. The higher the grade, the thicker the oil, and the less it flows.
Chemours—Chemours Krytox™ GPL 105 handles extreme temperature swings, is chemically inert, and can be used with oxygen. It is long lasting with an indefinite shelf life.
Synthetic Oil Base—Synthetic oil lasts longer than mineral oil and withstands a wider range of temperatures.
NSF Registered H1—Oil that is NSF Registered H1 and oil that is FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food.
Viscosity Grade | Container | Temp., ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ISO | AGMA | SAE | SSU @ Temp. | Size, fl. oz. | Type | Min. | Max. | Color | With Detergent | Food Industry Std. | 1-5 | 6-Up | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Chemours Krytox™ GPL 105—Synthetic Oil Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 150 | 4 | 40 | 825 SSU @ 100° F | 9 | Bottle | -30 | 400 | Clear | No | NSF Registered H1 | 10195K121 | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Seal and O-Ring Oil
 |
Apply directly to seals and O-rings to extend service life by preventing drying and cracking. This oil can be used with virtually any rubber polymer, including Buna-N and neoprene.
Viscosity is the thickness of an oil. Rated at 100,000 centistokes (cSt), this oil has the consistency of honey, so it stays in place.
High-Vacuum Seal and O-Ring Grease
 | |
Pail | Tube |
A firm consistency and resistance to evaporation make this grease ideal for high-vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.
Grease lubricates most efficiently below the maximum temperature.
PTFE Thickener—Grease with PTFE thickener resists aggressive acids, bases, and solvents.
3 NLGI Grade—NLGI 3 is about the consistency of vegetable shortening and is comparable to Fomblin grease.
3.5 NLGI Grade—NLGI 3.5 is between the consistency of vegetable shortening and frozen yogurt.
Nonmelting—Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Melting Temperature—Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | Temp., ° F | Each | Package | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Consistency Grade | Base Oil | Size, fl. oz. | Net Wt., lb. | Type | Min. | Max. | Melting Temp., ° F | Max. Vacuum @ Temp. | Color | Each | Pkg. Qty. | Pkg. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DuPont Molykote High Vacuum Grease—Silica Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3.5 | Synthetic Oil | — | 8 | Pail | -40 | 400 | Nonmelting | 1× 10^-6 Torr @ 72° F | White | 2966K58 | 0000000 | — | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3.5 | Synthetic Oil | 5.3 | — | Tube | -40 | 400 | Nonmelting | 1× 10^-6 Torr @ 72° F | White | 2966K52 | 00000 | 12 | 2966K521 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PTFE Thickener | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3 | Synthetic Oil | 3 1/2 | — | Tube | 0 | 480 | 525 | 1× 10^-4 Torr @ 72° F | White | 1326K59 | 000000 | — | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
