About Brightness
More
About Light Appearance
More
Compact Strip Machine Lights

With a slimmer profile than other strip machine lights, these lights fit in tight spots inside machinery because they don’t have a circuit board. They’re often used to light up tool changeovers and other maintenance tasks in cramped machines. The LEDs are sealed in plastic to withstand impact and block out fluid, dust, and debris. IP67 rated, these lights are watertight against temporary submersion, so they can handle your wettest environments. These lights highlight white and blue tones, making them good for inspecting.
Style D have an adjustable mounting bracket that rotates 180°, so you can direct the light where it’s needed. Loosen the fasteners at each end to change its angle.
Lights | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Holes | Replacement Adjustable Brackets | |||||||||||||||
| Style | Lg. | Ht. | Wd. | Brightness, lumens | Light Appearance | Light Color | Wattage | Housing Material | Environmental Rating | Mounting Fasteners Included | No. of | Dia., mm | Voltage | Each | Each | ||
Built-In LED—Non-Cascadable | |||||||||||||||||
Bracket Mount—180° Tilt | |||||||||||||||||
| D | 17 3/8" | 1 21/32" | 7/8" | 1,600 | Daylight (6,500K) | White | 18W | Aluminum | IP67 | No | 2 | 5 | 9-16V DC | 00000000 | 000000 | 0000000 | 00000 |
Easy-Retrofit Machine Lights

Update conventional fluorescent tubular lights with newer LED technology. These lights match the diameter of most older lights and fit existing brackets without the need to drill new mounting holes. They have a durable lens that resists coolants, lubricants, and impact from chips and shavings. All are rated IP67 for protection against dust and temporary submersion, so these lights can handle your wettest environments.
Style A have a traditional tubular design that distributes light more evenly than Style B. Plug them into a standard outlet and use the switch built into the cord to turn them on and off.
Style B have a flat lens that directs light downward. Hardwire them to your power supply. They come with mounting brackets at each end. Optional mounting brackets (sold separately) clip anywhere along the light, so you can position them where it makes sense for your machine.
Add a power supply (sold separately) to transform your facility’s AC voltage to DC voltage. Mount the power supply outside of your machine to protect it from heat.
Lights | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Cord | Clip-On Mounting Brackets | Power Supplies | ||||||||||||||||
| Style | Lg. | Dia. | Brightness, lumens | Included | Lg., ft. | Electrical Connection Type | Wattage | Adjustability | Housing Material | Lens Material | Mount Type | Mounting Hardware Included | Environmental Rating | Each | Each | Each | |||
Built-In LED | |||||||||||||||||||
18-30V DC | |||||||||||||||||||
| B | 21" | 2 3/4", 70 mm | 1,350 | Yes | 16 | Hardwire | 18W | Adjustable 65° | Anodized Aluminum | Tempered Glass | Fastener Mount | Yes | IP67 | 0000000 | 0000000 | 0000000 | 000000 | 00000000 | 000000 |
Workstation Strip Lights

Suspend these lights overhead or mount them above your workspace. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. The LEDs produce a cool light appearance that highlights white/blue tones, which is good for inspecting. These lights are furnished with fastener-mount clips; they can also be mounted using the optional adjustable mounting brackets that swivel 180° or the magnetic mounting brackets, both sold separately.
Lights that operate on AC voltage include a 6-ft. power cord. For longer distances, you can swap it for the 10-ft. power cord (sold separately). To link multiple lights using a single electrical outlet, use the 4-pin connecting cord (sold separately); connect a maximum of 10 lights.
Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Wd. | High-Beam Brightness, lumens | Low-Beam Brightness, lumens | Light Appearance | Wattage | Voltage | Housing Material | Electrical Connection Type | Mounting Hardware Included | Each | |
Built-In LED Bulbs | ||||||||||||
| 22 3/4" | 1 7/8" | 1 1/4" | 1,300 | 650 | Cool (5,000K) | 18W | 120V AC, 240V AC | Anodized Aluminum | Three-Prong Plug | Yes | 0000000 | 0000000 |
Plug-In Tubular Portable Lights


Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces. A plastic lens keeps drops and dings from breaking the lights.
Style A and C hang from included hooks at each end.
Lights with an SJO cord resist oil. Lights with an SJOOW cord resist oil better than lights with an SJO or SJOW cord, and they also resist weather.
Lights with an outlet included can be daisy chained together to avoid running separate extension cords. Connect up to 20 lights.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Dia. | Brightness, lumens | Light Appearance | Cord Lg., ft. | Electrical Connection Type | Cord Type | Outlet Included | Max. Outlet Current | Wire Gauge | Mount Type | Each | |
For Replaceable LED Bulbs | |||||||||||||
| A | 53" | 2" | 2,160 | Cool (5000K) | 25 | Three-Prong Plug | SJOOW | Yes | 14A | 14 | Hook | 00000000 | 0000000 |
| C | 55" | 2" | 2,100 | Cool (5000K) | 25 | Three-Prong Plug | SJO | No | __ | 18 | Hook | 0000000 | 000000 |



























