Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

Illuminate machines or monitor processes in environments that reach up to 210° F. These lights have a thick housing that acts as a heat sink to protect the LEDs and driver from overheating.

Update conventional fluorescent tubular lights with newer LED technology. These lights match the diameter of most older lights and fit existing brackets without the need to drill new mounting holes.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Illuminate inline flow sights to inspect the color, clarity, and flow of liquids in food and beverage, brewery, chemical, and pharmaceutical processing lines.

Brighten countertops that your ceiling lights can’t reach. These lights are low-profile, so they won’t take up valuable workspace below your cabinets.

Bend these flexible lights around corners or squeeze them into spaces where bulky fixtures won’t fit. They’re brighter than plug-in tape lights, so you can use them for inspections and other detailed work.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting.

Stretch the arm to bring light directly over your work—even across a large surface. Also known as articulating arm lights, these lights have rigid sections that hold their position steady, including when fully extended.

Though not as bright as our miniature fiber-optic lights, these lights are more affordable. With flexible arms, you can adjust these lights to direct light where you need it, even in hard-to-reach spots.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working.

Hang these lights where you need them on the job site.

Aim light where it's needed most in areas that don't have an electrical outlet.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction.

Raise, lower, and tilt these lights to brighten your work in wet spaces.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

Our brightest plug-in floodlights, these lights illuminate large worksites—about the size of a hockey rink.

Brighten enclosures and small spaces like closets and drawers—no hardwiring or outlets needed. Powered by a rechargeable battery, these lights are easy to install and help save on maintenance costs.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Light that moves with your gaze, not your grip. These headlamps provide hands-free illumination.

Brighten things in your periphery without having to turn your head. These headlamps cast a beam that’s two to three times wider than traditional headlamps.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap.

Light up your work from under your brim.

Light up drawers and enclosures where power isn’t available—these lights are compact and powered by battery.

The most versatile of our machine vision lights, these bar lights can be used alone, installed side-by-side, or assembled into a ring light.

Surround your camera with light for perfectly aligned brightness. These small and lightweight ring lights are mounted directly around your machine vision camera or vision sensor.

Highlight small, specific areas with intensely bright light to help your machine vision camera home in on the details of your product.