About Brightness
More
About Light Appearance
More
Plug-In Tape Lights

These thin, flexible lights wrap around equipment, hide under cabinets, and squeeze into tight spaces—all you need is an outlet. Just peel and stick to attach them to any smooth surface. They’re easier to install than hardwired tape lights, but they’re not as bright. All come with a controller to turn them on or off and adjust the brightness and light appearance. You can also cut them to size.
Tape lights with only white LEDs are brighter than lights with any-color LEDs. You can link multiple lights together wirelessly: press the power button on one light, and others within 50 ft. will also turn on or off. For a longer light, connect two strips together. Use the included connecting cables to wrap a light around a sharp corner or make small jumps between strips.
| Lg., ft. | Wd. | Light Appearance | Brightness per Foot, lumens | CRI | Light Setting | Wattage | Voltage | Electrical Connection Type | Mounting Hardware Included | Environment | Includes | Features | Each | |
Built-In LED | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
White | ||||||||||||||
| 16 | 3/8" | Warm (2,700K, 3,000K), Neutral (3,500K), Cool (4,000K), Daylight (5,000K) | 200 | 80 | Dimmable | 40W | 120V AC | Three-Prong Plug | Yes | Damp Location | Controller, Three 6" Connecting Cables | Wirelessly Linkable | 00000000 | 000000 |
Tape Lights

Drivers provide a constant voltage to your tape lights, protecting the LEDs from power fluctuations. Built-in thermal protection helps extend the lifespan of these drivers, and they’re housed in a UL-listed enclosure suitable for wet locations. To install, feed the power source and tape light wire leads through the knockouts. Seal the entry points using a 1/2 trade size conduit fitting or cord grip. Inside the enclosure, connect the wire leads using the included lever connectors. Do not exceed the recommended tape length; to power longer lights, add another driver.
Output | Input | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tape Lg., ft. | Electrical Connection Type | Voltage | Current, A | Wattage | Wire Connection Type | Current, A | Max. Wattage | Wire Connection Type | Light Setting | Lg. | Wd. | Ht. | Environmental Rating | Specifications Met | Includes | Each | |
120-277V AC Input Voltage | |||||||||||||||||
| 0-6 | Hardwire | 24V DC | 1.66 | 40W | Wire Leads | 0.43 | 47W | Wire Leads | Dimmable | 8" | 2 3/4" | 1 5/8" | IP62 | UL Listed, UL Recognized Component, C-UL Listed, C-UL Recognized Component, FCC Compliant, CE Marked | Two Clamp-On Wire Splicing Connectors | 0000000 | 000000 |
Plug-In Tubular Portable Lights

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces. A plastic lens keeps drops and dings from breaking the lights.
Style B are our brightest tubular portable lights, shining from four light tubes encased together. They mount with the included straps, or you can stand them on end for a freestanding light.
Lights with an SJOW cord resist oil and weather.
Lights with an outlet included can be daisy chained together to avoid running separate extension cords. Connect up to 20 lights.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Wd. | Dp. | Brightness, lumens | Light Appearance | Cord Lg., ft. | Electrical Connection Type | Cord Type | Outlet Included | Max. Outlet Current | Wire Gauge | Mount Type | Each | |
For Replaceable LED Bulbs | ||||||||||||||
| B | 27 5/8" | 7 3/8" | 6 1/8" | 5,000 | Cool (5000K) | 10 | Three-Prong Plug | SJOW | Yes | 14A | 14 | Suspension | 00000000 | 0000000 |
Wet-Location Magnet-Mount Portable Lights

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working. Strong magnets on the back keep them from sliding down or shaking loose. You can also secure them with a chain (not included) from the eyebolt at the top.
Style A and D have a handle for carrying the lights to your worksite.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Wd. | Dp. | Brightness, lumens | Light Appearance | Cord Lg., ft. | Electrical Connection Type | Outlet Included | Wire Gauge | Mount Type | Environmental Rating | Specifications Met | Color | Each | |
Built-In LEDs | |||||||||||||||
| D | 26" | 7" | 5 3/16" | 4,400 | Cool (5000K) | 6 | Three-Prong Plug | No | 18 | Eyebolt, Magnetic | NEMA 6 | ETL Listed, C-ETL Listed | White | 00000000 | 0000000 |
Cordless Freestanding Portable Floodlights for DeWalt Rechargeable Batteries

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit. Built for tough jobsites, their plastic lens resists impact.
Style C double as a toolbox—the lights are built into the lid. It has two light heads that pivot to aim light where you need it. You can detach the lid and hang it up with the built-in hook. To conserve battery, these floodlights have seven brightness levels to choose from. They’ll also run on AC power with an extension cord (not included).
Note: Battery life depends on the size of your battery.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Wd. | Dp. | Brightness, lumens | Light Appearance | Head Adjustability | Material | Batteries Included | Mount Type | Features | Color | Each | |
Rechargeable Batteries | |||||||||||||
Built-In LED | |||||||||||||
| C | 20 5/8" | 15 1/2" | 11" | 4,000 | Cool (5000K) | Vertical, Horizontal | Plastic | No | Hook | Battery Life Indicator | Black/Yellow | 00000000 | 0000000 |

























