Narrow-Width Straight Ladders
Use these ladders to climb in and out of tight, narrow places. They are also known as manhole ladders.
Fiberglass ladders are nonconductive for use in electrical work. ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1AA ladders are tested to hold up to 375 lbs.
Aluminum ladders are lighter than fiberglass, making them easier to move between work areas. ANSI A14.2 certifies dimensional and performance requirements for aluminum ladders. Type 1A ladders are tested to hold up to 300 lbs.
Note: Ladders meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.
Overall | Step | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | Wt., lbs. | No. of Steps | Material | Tread | Features | Specifications Met | Each | |
Fiberglass | ||||||||||
Type 1AA (375-lb. Cap.) | ||||||||||
| 4'5" | 8 | 13" | 20 | 8 | Aluminum | Ribbed | Plastic Rail Sleeves | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 0000000 |
| 6'5" | 10 | 13" | 24 | 10 | Aluminum | Ribbed | Plastic Rail Sleeves | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 000000 |
| 8'4" | 12 | 13" | 28 | 12 | Aluminum | Ribbed | Plastic Rail Sleeves | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 000000 |
| 10'3" | 14 | 13" | 32 | 14 | Aluminum | Ribbed | Plastic Rail Sleeves | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 000000 |
| 12'2" | 16 | 13" | 40 | 16 | Aluminum | Ribbed | Plastic Rail Sleeves | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053, ANSI A14.5 | 0000000 | 000000 |
Aluminum | ||||||||||
Type 1A (300-lb. Cap.) | ||||||||||
| 2'6" | 6 | 12" | 9 | 6 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
| 4'5" | 8 | 12" | 12 | 8 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
| 6'5" | 10 | 12" | 15 | 10 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
| 8'4" | 12 | 12" | 18 | 12 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
| 10'3" | 14 | 12" | 21 | 14 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
| 12'2" | 16 | 12" | 24 | 16 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
| 16'1" | 20 | 12" | 30 | 20 | Aluminum | Ribbed | __ | Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, ANSI A14.2 | 0000000 | 000000 |
Rope Ladders
Locking
Snap Hooks
Attach one of these ladders to a fixed object and drop it into a tank, manhole, pit, or temporary work area. They’re lightweight, so you can easily carry them anywhere.
Ladders with 1 or 2 loop ends work well when you already have hooks you can slide the loops over. Otherwise, you’ll need to use carabiners or other hardware to secure these ladders to an anchor point.
Ladders with locking snap hooks have hardware built in for attaching directly to an anchor point.
Note: Check local, state, and federal codes, including OSHA, for safe set-up and operating practices.
Overall | Hook | Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Climbing Ht. | Ht., ft. | Wd. | Cap., lbs. | Wt., lbs. | Rope Dia. | Loop ID | ID | Ht. | No.of Steps | Material | Tread | Each | |
Nylon Rope | |||||||||||||
With 1 Loop End | |||||||||||||
| 1'6" | 4 | 12" | 300 | 2 | 3/8" | 20" | __ | __ | 3 | Plastic | Ribbed | 00000000 | 000000 |
| 2'6" | 5 | 12" | 300 | 3 | 3/8" | 20" | __ | __ | 4 | Plastic | Ribbed | 00000000 | 00000 |
| 3' | 6 | 12" | 300 | 3 | 3/8" | 20" | __ | __ | 5 | Plastic | Ribbed | 00000000 | 00000 |
With 2 Loop Ends | |||||||||||||
| 10' | 15 | 15" | 300 | 10 | 5/8" | 3" | __ | __ | 10 | Wood | Smooth | 0000000 | 000000 |
| 12' | 17 | 15" | 300 | 12 | 5/8" | 3" | __ | __ | 12 | Wood | Smooth | 0000000 | 000000 |
| 15' | 20 | 15" | 300 | 15 | 5/8" | 3" | __ | __ | 15 | Wood | Smooth | 0000000 | 000000 |
| 20' | 25 | 15" | 300 | 20 | 5/8" | 3" | __ | __ | 20 | Wood | Smooth | 0000000 | 000000 |
| 25' | 30 | 15" | 300 | 25 | 5/8" | 3" | __ | __ | 25 | Wood | Smooth | 0000000 | 000000 |
| 30' | 35 | 15" | 300 | 30 | 5/8" | 3" | __ | __ | 30 | Wood | Smooth | 0000000 | 000000 |
| 40' | 45 | 15" | 300 | 40 | 5/8" | 3" | __ | __ | 40 | Wood | Smooth | 0000000 | 000000 |
| 50' | 55 | 15" | 300 | 50 | 5/8" | 3" | __ | __ | 50 | Wood | Smooth | 0000000 | 000000 |
With Locking Snap Hooks | |||||||||||||
| 10' | 15 | 15" | 300 | 10 | 5/8" | __ | 1" | 5 3/4" | 10 | Wood | Smooth | 0000000 | 000000 |
| 12' | 17 | 15" | 300 | 12 | 5/8" | __ | 1" | 5 3/4" | 12 | Wood | Smooth | 0000000 | 000000 |
| 15' | 20 | 15" | 300 | 15 | 5/8" | __ | 1" | 5 3/4" | 15 | Wood | Smooth | 0000000 | 000000 |
| 20' | 25 | 15" | 300 | 20 | 5/8" | __ | 1" | 5 3/4" | 20 | Wood | Smooth | 0000000 | 000000 |
| 25' | 30 | 15" | 300 | 25 | 5/8" | __ | 1" | 5 3/4" | 25 | Wood | Smooth | 0000000 | 000000 |
| 30' | 35 | 15" | 300 | 30 | 5/8" | __ | 1" | 5 3/4" | 30 | Wood | Smooth | 0000000 | 000000 |
| 40' | 45 | 15" | 300 | 40 | 5/8" | __ | 1" | 5 3/4" | 40 | Wood | Smooth | 0000000 | 000000 |
| 50' | 55 | 15" | 300 | 50 | 5/8" | __ | 1" | 5 3/4" | 50 | Wood | Smooth | 0000000 | 000000 |
Sectional Extension Ladders
Combine individual sections to make a ladder that suits your job. Quick to build or take apart, these ladders are easy to store or move between sites. They’re narrower than standard extension ladders, so you can use them to climb in and out of tight spaces.
Type 1 ladders are tested to hold up to 250 lbs. Combine up to three to create your ladder. You’ll need two top caps and two rubber shoes (each sold separately).
Type 1AA ladders are tested to hold up to 375 lbs. You’ll need one base section and one upper section to create your ladder. Connect them with the included latches. The base section has tilting feet that brace the ladder at the angle you need and keep it from sliding.
Note: Ladders meet ANSI, OSHA, and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.
Ladders | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Step | Top Caps | Rubber Shoes | ||||||||||||
| Max. Ht., ft. | Section Ht., ft. | Overall Wd. | Wt., lbs. | No. of Steps | Material | Tread | Includes | Specifications Met | Each | Each | Each | |||
Fiberglass | ||||||||||||||
| 18 | 6 | 12" | 16 | 6 | Aluminum | Ribbed | Tension Clamps | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 |
Step | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Ht., ft. | Section Ht., ft. | Overall Wd. | Wt., lbs. | No. of Steps | Material | Tread | Features | Includes | Specifications Met | Each | |
Fiberglass | |||||||||||
Base Section | |||||||||||
| 12 | 4 | 14" | 17 | 4 | Aluminum | Ribbed | Tilting Feet | Connecting Latches | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | 00000000 | 0000000 |
| 16 | 8 | 14" | 20 | 8 | Aluminum | Ribbed | Tilting Feet | Connecting Latches | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | 00000000 | 000000 |
| 20 | 12 | 14" | 24 | 12 | Aluminum | Ribbed | Tilting Feet | Connecting Latches | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | 00000000 | 000000 |
Upper Section | |||||||||||
| 16 | 4 | 14" | 7 | 4 | Aluminum | Ribbed | __ | __ | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | 00000000 | 000000 |
| 20 | 8 | 14" | 13 | 8 | Aluminum | Ribbed | __ | __ | ANSI A14.5, Cal/OSHA Compliant Title 8 Section 3276, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | 00000000 | 000000 |
Fall-Rescue Ladders
Lower a ladder so a teammate can climb to safety after a fall. These ladders come tucked in a storage bag for easy carrying. Clip the included carabiner to your anchor and toss the bag down—the ladder unfurls directly from the bag. The bag repels water to keep the ladder dry. Reflective trim makes it easy to spot when you need it.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht., ft. | Wd. | No. of Steps | Material | Construction | Carabiner Opening Wd. | Carabiner Material | Includes | Cap., lbs. | Specifications Met | Each | |
| 22 | 10" | 22 | Nylon Fabric | Webbing | 3/4" | Steel | Carabiner, Storage Bag | 420 | OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502 | 00000000 | 0000000 |