Store bars, spools, and other items on a single versatile rack.

Easily assemble and reconfigure as your needs change.

Also known as cantilever racks.

These cantilever racks are made to be used with forklifts and cranes.

Dividers snap in and out, allowing you to adjust the width of the compartments.

Roll these bins near benches or other work areas, and turn each storage level to access the items you need.

Pull out the bin boxes for easy access to contents.

Bins can be stacked on a surface, wall mounted, or attached to a rack.

Protect up to twenty-four 3" × 3" to 12" × 12" circuit boards from static electricity.

Faster to assemble than other heavy duty shelving, these units require no hardware.The uprights come assembled, and the shelves slide into place.

These one-piece units have an all-welded steel construction to support heavy tools and materials.

The sloped shelves on these shelving units allow parts to flow forward, providing access and visibility.

This shelving quickly snaps together with no tools or hardware needed, yet is strong enough to handle your heavy parts and equipment.

The shelves on these units pull out to access heavy dies, machinery, and tools. They slide on roller bearings so you can retrieve contents horizontally with a forklift and vertically with a hoist, crane, or monorail system.

Shelves are reversible, allowing you to use them as a flush surface or with a lip to prevent items from falling off.

Only 14" wide, this shelving easily fits into tight spaces.

Often used in food service areas and laboratories, these shelving units have removable, dishwasher-safe panels that are treated to prevent degradation caused by the growth of stain- and odor-causing bacteria.

The three-sided design stabilizes packages and other contents when moving.

This shelving is reinforced to hold nearly twice as much weight as other wire shelving, and is chrome plated to resist corrosion. Shelf panels are removable for easy cleaning.

Also known as bulk racks, these units offer more storage space per level for large items and boxes.

These shelves are corrosion resistant and vented to prevent dust buildup.

These standards can be surface mounted or flush mounted inside a routed groove.

These corrosion-resistant shelves hold twice the weight of other wall-mount shelving.

These smooth, solid shelves are corrosion resistant and easy to clean.

Choose from uprights up to 16 feet high and beams up to 144” wide to create a pallet rack to fit your needs.

With up to 9,600 lbs. capacity per storage level, these are the strongest pallet racks we offer.

Protect rack posts from damage caused by vehicles.

Create a sturdy barrier to prevent material from falling with this alternative to pallet rack netting.

Compatible with pallet racks with stepped beams.

Shaft collars secure the spools on the spindles.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Pivots provide smooth motion at the junction between two T-slotted rails.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Route wires, cables, and tubing along T‐slotted rails.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Slide drawers, panels, and doors with these tracks and rollers.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

To provide corrosion resistance in wet environments, this framing is galvanized.

Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.

Create strong structures by welding this framing together. Add metal panels to close off openings.

Thick construction makes this framing strong and sturdy.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Brackets mount on the outside of strut channel to allow trolley movement.

Use with hex nuts to connect threaded rod.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Keep a rod securely centered against the strut channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Slide the strut channel into the tube for telescoping length adjustments.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Securely fasten strut channel to the floor.

Push these nuts into place rather than threading them onto a fastener.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Provide smooth motion between two pieces of strut channel.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Create continuous runs of channel without corners.