Metal Repair Epoxy Adhesives

Filter by

For Use On

Container Type

Color

Consistency

Process After Hardening

Manufacturer

Maximum Temperature

Formulation

Manufacturer Model Name

Fixmaster Aluminum Liquid

Fixmaster Aluminum Putty

Fixmaster Epoxy

Fixmaster Metal Magic Steel

Fixmaster Stainless Steel Putty

Fixmaster Steel Epoxy

Fixmaster Steel Liquid

Fixmaster Steel Putty

Fixmaster Superior Metal

Fixmaster Underwater Repair Epoxy

Fixmaster Wear Resistant Putty

Type

For Use Outdoors

Material

Mix Ratio

Begins to Harden

Environment

Clarity

Reaches Full Strength

Manufacturer Model Number

Container Net Weight

For Joining

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Container Size

77 Products

Surface Fillers for Metal


Epoxy Jar	Epoxy Cartridge	Epoxy Tube	Epoxy Syringe

Epoxy Stick	Jar, Can	Jar, Can	Can

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.

Fixmaster Aluminum Liquid and Fixmaster Aluminum Putty—Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.

Fixmaster Steel Epoxy—Use Loctite® Fixmaster Steel Epoxy with a dispensing gun and mixer nozzle to mix as you dispense.

Model Number EA 3471 and Model Number PC 235642—Loctite EA 3471 and PC 235642 have stronger adhesion than any other surface fillers we offer.

Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

NSF/ANSI 61—NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

		Container													Temp. Range, ° F
	Mfr. Model No.	Size, fl. oz.	Net Wt.	Type	Lg.	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	Dia.	For Use Outdoors	Min.	Max.	Color	Food Industry Std.	Process After Hardening	For Use On		Each
Loctite® Fixmaster Aluminum Liquid



		PC 3466	—	1 lb.	Jar, Can	—	20	24 hr.	Thick Liquid	Yes	5:1	60 in² @ 1/4"	1"	—	Yes	-20	200	Gray	—	Machine, Drill, Tap	Aluminum	7489A31	0000000


		Loctite® Fixmaster Aluminum Putty



				PC 7254	—	1 lb.	Jar	—	20	24 hr.	Paste	Yes	4:1	70 in² @ 1/4"	1"	—	Yes	-20	200	Gray	—	Machine, Drill, Tap	Aluminum	7489A32	000000


				Loctite® Fixmaster Steel Putty



						EA 3471	—	1 lb.	Jar	—	30	24 hr.	Thick Liquid	Yes	2.5:1	40 in² @ 1/4"	1"	—	Yes	-20	220	Gray	—	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	7489A23	00000


						EA 3473	—	1 lb.	Jar	—	3	24 hr.	Paste	Yes	1:1	50 in² @ 1/4"	1"	—	Yes	-20	190	Gray	—	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	7489A25	00000
						PC 235642	—	4 lb.	Can	—	30	24 hr.	Paste	Yes	2.5:1	170 in² @ 1/4"	1"	—	Yes	-20	220	Gray	—	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	7489A24	000000


						Loctite® Fixmaster Steel Epoxy



								PC 3965	1.7	—	Cartridge	—	3	7 hr.	Paste	Yes	1:1	57 in² @ 1/4"	1"	—	Yes	-20	200	Gray	—	Machine, Drill, Sand, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	1765A3	00000


								Loctite® Fixmaster Stainless Steel Putty



										EA 3476	—	1 lb.	Jar	—	20	24 hr.	Paste	Yes	4:1	30 in² @ 1/4"	1"	—	Yes	-20	220	Gray	—	Machine, Drill, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron	7489A29	000000


										Devcon Plastic Steel® Liquid



												10210	—	1 lb.	Jar, Can	—	45	16 hr.	Thick Liquid	Yes	9:1	50 in² @ 1/4"	3/4"	—	Yes	-40	250	Dark Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	74575A83	00000


												10220	—	4 lb.	Jar, Can	—	45	16 hr.	Thick Liquid	Yes	9:1	200 in² @ 1/4"	3/4"	—	Yes	-40	250	Dark Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	74575A84	000000


												Devcon Plastic Steel® Epoxy



														52345	2	—	Tube	—	60	24 hr.	Thick Liquid	Yes	1:1	14 in² @ 1/4"	1/4"	—	Yes	-40	200	Dark Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	74575A85	0000


														Devcon Plastic Steel® Putty



																10110	—	1 lb.	Jar, Can	—	45	16 hr.	Putty	Yes	9:1	40 in² @ 1/4"	3/4"	—	Yes	-40	250	Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	74575A81	00000


																10120	—	4 lb.	Jar, Can	—	45	16 hr.	Putty	Yes	9:1	190 in² @ 1/4"	3/4"	—	Yes	-40	250	Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	74575A82	000000


Devcon Plastic Steel® 5 Minute Putty



																10240	—	1 lb.	Jar, Can	—	5	16 hr.	Putty	Yes	1.7:1	40 in² @ 1/4"	3/4"	—	Yes	-40	200	Dark Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	74575A63	000000


		Devcon Bronze Putty



																10260	—	1 lb.	Jar, Can	—	35	16 hr.	Putty	Yes	9:1	50 in² @ 1/4"	3/4"	—	Yes	-40	250	Bronze	—	Machine, Drill, Sand, Saw, Tap	Brass, Bronze	74575A64	000000


																Devcon Stainless Steel Putty



																10270	—	1 lb.	Jar, Can	—	60	16 hr.	Putty	Yes	11:1	50 in² @ 1/4"	3/4"	—	Yes	-40	250	Dark Gray	NSF/ANSI 61	Machine, Drill, Sand, Saw, Tap	Stainless Steel	74575A69	000000


																Devcon FasMetal™ Putty



																		10780	—	0.75 lb.	Jar, Can	—	4	16 hr.	Putty	Yes	1:1	60 in² @ 1/4"	3/4"	—	Yes	-40	250	Gray	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium	74575A76	000000


						Permatex Black Plastic Welder



																		84145	0.8	—	Syringe	—	10	24 hr.	Thick Liquid	Yes	1:1	—	1/8"	—	Yes	-60	250	Black	—	Machine, Drill, Sand, Saw, Tap	Aluminum, Stainless Steel, Cast Iron	74575A56	0000


								Epoxy Surface Fillers



																		—	—	4 oz.	Stick	8"	3	24 hr.	Putty	Yes	—	16 in² @ 1/4"	1/2"	1"	Yes	-40	250	Copper	NSF/ANSI 61	Drill, Sand, Saw	Brass, Bronze, Copper	66145A3	00000


										—								—	4 oz.	Stick	8"	5	20 min.	Putty	Yes	—	—	—	1 3/16"	Yes	Not Rated	500	Gray	NSF/ANSI 61	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	6615A12	00000

Guns

		Each
Air-Powered Dispensing Gun for Loctite® Fixmaster Steel Epoxy	74695A101	0000000
Dispensing Gun for Loctite® Fixmaster Steel Epoxy	1773A32	00000

Surface Fillers


Epoxy Mixer Cup	Epoxy Jar	Clay Tube

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

Aluminum Liquid and Aluminum Putty—Devcon Aluminum Liquid and Devcon Aluminum Putty form a nonrusting finish.

Metal Patch & Fill—Devcon Metal Patch & Fill repairs worn, rusted, and corroded surfaces with less preparation.

		Container											Temp. Range, ° F
	Mfr. Model No.	Size, fl. oz.	Net Wt.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy



		EA 445	—	0.12 oz.	Mixer Cup	5	12	Thick Liquid	Yes	1:1	1 in² @ 1/4"	1/4"	Yes	-65	180	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	7512A15	000000


		EA 445	—	1 oz.	Mixer Cup	5	12	Thick Liquid	Yes	1:1	1 in² @ 1/4"	1/4"	Yes	-65	180	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	7512A16	000000
		EA 9131	—	0.12 oz.	Mixer Cup	90	24	Thick Liquid	Yes	1.5:1	1 in² @ 1/4"	1/4"	Yes	-65	180	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Concrete, Glass, Wood	10	7512A14	00000


		Devcon Aluminum Liquid



				10710	—	1 lb.	Jar	75	16	Thick Liquid	Yes	9:1	70 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A74	000000


				10720	—	3 lb.	Jar	75	16	Thick Liquid	Yes	9:1	210 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A75	000000


				Devcon Aluminum Putty



						10610	—	1 lb.	Jar	60	16	Putty	Yes	9:1	70 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A72	000000


						10620	—	3 lb.	Jar	60	16	Putty	Yes	9:1	210 in² @ 1/4"	3/4"	Yes	-40	250	Aluminum	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood	1	74575A73	000000


						Devcon Metal Patch & Fill



								S-50	3	—	Tube	20	6	Paste	No	—	6 in² @ 1/4"	1/4"	Yes	40	400	Gray	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Ceramic, Glass	1	74575A98	0000

Conductive Surface Fillers for Electronics


Epoxy Jar	Single-Use Packet

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. They come as two parts. The size listed is the combined total of the two parts.

Thermal Conductivity—Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.

Electrical Volume Resistivity—Electrical volume resistivity measures how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

		Container												Temp. Range, ° F
	Mfr. Model No.	Size, fl. oz.	Net Wt., oz.	Type	Begins to Harden	Reaches Full Strength	Consistency	Mixing Req.	Thermal Conductivity, W/(m⋅°C)	Electrical Volume Resistivity	Mix Ratio	Max. Thk.	For Use Outdoors	Min.	Max.	Color	For Use On		Each
Loctite® Surface Fillers



		3888	—	0.09	Single-Use Packet	90 min.	24 hr.	Paste	Yes	1.44	0.001Ω⋅cm	100:6	1/4"	Yes	-40	170	Silver	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate	7366A55	000000


		Surface Fillers



				—	—	0.09	Single-Use Packet	90 min.	24 hr.	Paste	Yes	6.05	0.009Ω⋅cm	100:6	1/4"	Yes	-75	250	Silver	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass	7661A11	00000


				—	—	0.35	Single-Use Packet	90 min.	24 hr.	Paste	Yes	6.05	0.009Ω⋅cm	100:6	1/4"	Yes	-75	250	Silver	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass	7661A12	000000
				—	0.5	—	Jar	4 hr.	5 day	Paste	Yes	5.77	0.0004Ω⋅cm	1:1	Not Rated	No	Not Rated	300	Silver	Aluminum, Brass, Copper, Steel, Stainless Steel	7595A31	000000
				—	1	—	Jar	4 hr.	5 day	Paste	Yes	5.77	0.0004Ω⋅cm	1:1	Not Rated	No	Not Rated	300	Silver	Aluminum, Brass, Copper, Steel, Stainless Steel	7595A32	000000

Water-Resistant Surface Fillers

Epoxy

Stick

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty—Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

NSF/ANSI 61—NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.

		Container											Temp. Range, ° F
	Mfr. Model No.	Net Wt., oz.	Type	Lg.	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Approx. Coverage @ Thk.	Max. Thk.	Dia.	For Use Outdoors	Min.	Max.	Color	Food Industry Std.	Process After Hardening	For Use On		Each
Loctite® Fixmaster Metal Magic Steel



		EA 3463	4	Stick	8"	3	24 hr.	Putty	Yes	10 in² @ 1/4"	1"	1"	Yes	-20	250	Gray	NSF/ANSI 61	Sand	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	7489A26	000000


		Loctite® Fixmaster Underwater Repair Epoxy



				EA 9490	4	Stick	8"	15	60 min.	Putty	Yes	16 in² @ 1/4"	1/4"	1"	Yes	Not Rated	300	White	—	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Concrete, Fiberglass, Wood	7531A13	00000

Conductive Adhesives for Electronics

An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.

Epoxy


Single-Use Packet and Syringe	Single-Use Packet	Can

Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.

ASTM E595—Adhesives that meet ASTM E595, a standard used by NASA, produce almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

		Container
	Mfr. Model No.	Size, fl. oz.	Net Wt., oz.	Type	Surface Resistivity	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/(m⋅°C)	Mix Ratio	Consistency	Max. Temp., ° F	Specs. Met	For Joining		Each
Loctite®



		2902	—	0.09	Single-Use Packet, Syringe	1× 10^-3Ω⋅cm	60 min.	24 hr.	2.99	100:6	Paste	230	ASTM E595	Ceramic, Glass, Metal	7595A113	000000


		2902	—	0.35	Single-Use Packet, Syringe	1× 10^-3Ω⋅cm	60 min.	24 hr.	2.99	100:6	Paste	230	ASTM E595	Ceramic, Glass, Metal	7595A114	000000


		Other Conductive Adhesives



				—	—	0.09	Single-Use Packet	5× 10^-2Ω⋅cm	3 hr.	24 hr.	1.55	1:1.15	Paste	230	—	Ceramic, Glass, Metal	7661A13	00000


				—	0.5	—	Can	4× 10^-4Ω⋅cm	4 hr.	5 day	7.93	1:1	Paste	265	—	Metal	7595A33	000000
				—	0.5	—	Can	9× 10^-5Ω⋅cm	4 hr.	5 day	7.9	1:1	Paste	175	ASTM E595	Ceramic, Glass, Metal	7595A111	000000
				—	1	—	Can	4× 10^-4Ω⋅cm	4 hr.	5 day	7.93	1:1	Paste	265	—	Metal	7595A34	000000
				—	1	—	Can	9× 10^-5Ω⋅cm	4 hr.	5 day	7.9	1:1	Paste	175	ASTM E595	Ceramic, Glass, Metal	7595A112	000000

Wear-Resistant Protective Coatings for Metal

Also known as brushable ceramic, these coatings create a hard, low-friction surface that resists corrosion. They're often used on liquid processing equipment, such as pump casings, impeller blades, and valves, to protect worn areas and reduce turbulence. They’re also used on heat exchangers, condensers, and chutes. The size listed is the combined total of the two parts.

Ceramic—Can

Devcon

Devcon Brushable Ceramic Coatings—Devcon Brushable Ceramic resists acids, alkalies, fuels, and solvents. Apply with a brush or roller.

				Dry Time
	Mfr. Model No.	Container Net Wt., lb.	Solution Type	Touch, min.	Overall, hr.	Approx. Coverage @ Thk.	Mixing Req.	Mix Ratio	Application Time After Mixing, min.	Max. Temp., ° F	Application Temp. Range, ° F	For Use Outdoors	For Use On	Color		Each
Devcon Brushable Ceramic Coatings



		11765	2	Solvent Based	40	16	15 ft² @ 20 mil	Yes	5.6:1	40	350	55 to 90	No	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Cast Iron	Gloss Blue	74575A32	0000000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

										Temp. Range, ° F
	Mfr. Model No.	Container Type	Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength	Mixing Req.	Mix Ratio	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Devcon Zip Patch™



		11500	Patch	4"	9"	5	4 hr.	No	—	Yes	-40	200	Brown	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood	7790A21	0000000


		Epoxy Surface Fillers



				—	Patch	4"	6"	1	30 min.	Yes	1:1	Yes	—	425	Clear	Sand	Aluminum, Brass, Bronze, Copper, Vinyl Plastic, EPDM, SBR, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Fiberglass, Wood	74645A79	00000

High-Temperature Surface Fillers for Metal


Epoxy Syringe	Epoxy Stick

Epoxy Can, Bottle

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.

Syringe—Surface fillers in a syringe come with everything you need to make repairs.

Stick—Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

	Container													Temp. Range, ° F
	Size, fl. oz.	Net Wt., oz.	Type	Lg.	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	Dia.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		—	4	Stick	8"	90	72	Putty	Yes	—	16 in² @ 1/4"	1/2"	1"	Yes	-40	450	Gold	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	7803A21	000000


		1.5	—	Syringe	—	20	24	Putty	Yes	9.1:1	1 in² @ 1/4"	Not Rated	—	Yes	-40	500	Gray	Machine, Drill, Saw	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass	75325A1	00000
		16	—	Can, Bottle	—	20	24	Putty	Yes	9.1:1	10 in² @ 1/4"	Not Rated	—	Yes	Not Rated	500	Gray	Machine, Drill, Saw	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass	75325A2	00000

Chemical-Resistant Surface Fillers for Metal


Epoxy Jar	Epoxy Tube

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

		Container											Temp. Range, ° F
	Mfr. Model No.	Size, fl. oz.	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Loctite® Fixmaster Superior Metal



		EA 3478	—	1	Jar	20	24 hr.	Paste	Yes	4:1	30 in² @ 1/4"	1"	Yes	-20	250	Gray	Machine, Drill	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	7489A28	0000000


		Devcon Titanium Putty



				10760	—	1	Jar	20	16 hr.	Putty	Yes	4.3:1	40 in² @ 1/4"	3/4"	Yes	-40	350	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium	74575A7	000000


				10770	—	2	Jar	20	16 hr.	Putty	Yes	4.3:1	90 in² @ 1/4"	3/4"	Yes	-40	350	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium	74575A71	000000


				Epoxy Surface Fillers



						—	6.5	—	Tube	3	5 hr.	Paste	Yes	1:1	25 in² @ 1/4"	1/2"	Yes	-40	200	Gray	Machine, Drill, Sand, Tap	Aluminum	7500A4	00000


						—	11	—	Tube	25	7 day	Paste	Yes	1:1	50 in² @ 1/4"	1/4"	Yes	-55	180	Silver	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Steel, Cast Iron, Titanium	7500A11	00000

Water-Resistant Surface Filler Kits

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

West System 105K

Image of Product. Front orientation. Surface Fillers. Water-Resistant Surface Filler Kits.

Includes	Formulation	Consistency	For Use Outdoors	Temp. Range, ° F	Process After Hardening	For Use On		Each
8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves	Epoxy	Thin Liquid	Yes	35 to 130	Machine, Drill, Sand, Saw, Tap	Aluminum, Steel, Stainless Steel, ABS, PVC, Fiberglass, Wood	7480A51	000000

Replacement Parts for Surface Fillers

			Container
Component	No. of Pieces	Mfr. Model No.	Size	Type	Lg.	Wd.		Each
Two-Part Epoxy	6	101-TS	0.6 fl. oz.	Single-Use Packet	—	—	7480A32	000000
Resin	1	105	1 qt.	Can	—	—	7480A41	00000
Fast Hardener	1	205	7 fl. oz.	Can	—	—	7480A42	00000
Slow Hardener	1	206	7 fl. oz.	Can	—	—	7480A43	00000
Colloidal Silica Filler	1	406	1.7 fl. oz.	Canister	—	—	7480A33	00000
Colloidal Silica Filler	1	406	5.5 fl. oz.	Canister	—	—	7480A44	00000
Low-Density Filler	1	410	5 fl. oz.	Canister	—	—	7480A48	00000
Mini Dispensing Pump	3	300	—	—	—	—	7480A45	00000
Fiberglass Cloth	1	745	—	—	30"	30"	7480A47	00000

Impact-Resistant Surface Fillers for Metal

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders. The size listed is the combined total of the two parts.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container										Temp. Range, ° F
	Mfr. Model No.	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Loctite® Nordbak High Impact Wearing Compound



		PC 9313	25	Pail, Can	30	6	Paste	Yes	2:1	1,240 in² @ 1/4"	1/4"	Yes	-20	250	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A18	0000000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5 pt. Container—1.5-pint container can treat a 10-gallon fuel tank.

3 pt. Container—3-pint container can treat a 20-gallon fuel tank.

	Container								Temp. Range, ° F
	Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Epoxy Surface Fillers



		1.5	Can	5	24	Thick Liquid	Yes	2:1	No	70	90	Amber	Drill, Sand, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass	2450N12	000000


		3	Can	5	24	Thick Liquid	Yes	2:1	No	70	90	Amber	Drill, Sand, Tap	Acrylic Plastic, Aluminum, Brass, Bronze, Copper, Vinyl Plastic, Galvanized Iron, Galvanized Steel, Silver, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Nylon, Polyethylene, Polypropylene, Polyimide, PVC, PVDF, Ceramic, Porcelain, Fiberglass	2450N11	000000

Pourable Surface Fillers

Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container										Temp. Range, ° F
	Mfr. Model No.	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Loctite® Fixmaster Steel Liquid



		EA 3472	1	Can	25	24	Thick Liquid	Yes	4:1	50 in² @ 1/4"	1"	Yes	-20	220	Gray	Machine, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	7489A21	0000000


		EA 3472	4	Can	25	24	Thick Liquid	Yes	4:1	200 in² @ 1/4"	1"	Yes	-20	220	Gray	Machine, Tap	Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete	7489A22	000000

Fine-Particle Abrasion-Resistant Surface Fillers for Metal


Epoxy Jar	Epoxy Can	Epoxy Pail, Can	Epoxy Pail, Can

For use in processing equipment that carries particles smaller than _1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container										Temp. Range, ° F
	Mfr. Model No.	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Loctite® Fixmaster Wear Resistant Putty



		PC 7222	1	Jar	30	24	Putty	Yes	2:1	50 in² @ 1/4"	1"	Yes	-20	220	Gray	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	7489A33	0000000


		Loctite® Nordbak Pneu-Wear



				PC 7317	3	Can	30	6	Paste	Yes	4:1	150 in² @ 1/4"	1/4"	Yes	-20	250	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A6	000000


				PC 7317	25	Pail, Can	30	6	Paste	Yes	4:1	1,240 in² @ 1/4"	1/4"	Yes	-20	250	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A7	000000
				PC 7455	6	Can	10	3	Paste	Yes	2:1	310 in² @ 1/4"	1/4"	Yes	-20	220	Blue	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A11	000000

Large-Particle Abrasion-Resistant Surface Fillers for Metal


Epoxy Jar, Can	Epoxy Pail, Can

For use in processing equipment that carries large particles _1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container										Temp. Range, ° F
	Mfr. Model No.	Net Wt., lb.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Mixing Req.	Mix Ratio	Approx. Coverage @ Thk.	Max. Thk.	For Use Outdoors	Min.	Max.	Color	Process After Hardening	For Use On		Each
Loctite® Nordbak Wearing Compound



		PC 7218	5	Jar, Can	30	7	Paste	Yes	2:1	260 in² @ 1/4"	1/4"	Yes	-15	250	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A1	0000000


		PC 7218	25	Pail, Can	30	7	Paste	Yes	2:1	1,240 in² @ 1/4"	1/4"	Yes	-15	250	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A2	000000
		PC 7357	6	Jar, Can	25	8	Paste	Yes	2:1	310 in² @ 1/4"	1/4"	Yes	-20	250	Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A12	000000
		PC 9599	6	Jar, Can	10	3	Paste	Yes	2:1	310 in² @ 1/4"	1/4"	Yes	-20	220	Blue	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium	1830A9	000000