TG Collets
Clamp cutting tools in TG collet chucks for rough milling and drilling. These collets have a steep taper angle for a tighter, more stable grip than ER collets. This design gives them the strength to handle large tools and aggressive cuts. However, their grip range is smaller than ER collets, so you’ll need more collets to hold the same range of shank sizes. Use them in CNC machines and drill presses.
| Collet Size | Grip Range | TIR (Total Indicated Runout) Accuracy | ID Tolerance | Max. Body Dia. | Overall Lg. | Each | |
TG-75 | |||||||
|---|---|---|---|---|---|---|---|
Hardened Steel | |||||||
| 1/8" | 0.109"-0.125" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A111 | 000000 |
| 3/16" | 0.171"-0.187" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A112 | 00000 |
| 1/4" | 0.234"-0.250" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A113 | 00000 |
| 5/16" | 0.297"-0.312" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A114 | 00000 |
| 3/8" | 0.359"-0.375" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A115 | 00000 |
| 7/16" | 0.422"-0.437" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A116 | 00000 |
| 1/2" | 0.484"-0.500" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A117 | 00000 |
| 9/16" | 0.547"-0.563" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A118 | 00000 |
| 5/8" | 0.609"-0.625" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A119 | 00000 |
| 3/4" | 0.734"-0.750" | 0.0005" | -0.0004" to 0" | 1.06" | 1.84" | 32605A121 | 00000 |
TG Collet Sets
Keep a set of TG collets on hand to clamp cutting tools for rough milling and drilling. These collets have a steep taper angle for a tighter, more stable grip than ER collets. This design gives them the strength to handle large tools and aggressive cuts. However, their grip range is smaller than ER collets, so you'll need more collets to hold the same range of shank sizes. Use them in CNC machines and drill presses.
| No. of Pieces | Collet Sizes Included | TIR (Total Indicated Runout) Accuracy | Approximate Dia. Compression | Max. Body Dia. | Overall Lg. | Each | |
TG-75 | |||||||
|---|---|---|---|---|---|---|---|
Hardened Steel | |||||||
| 11 | 1/4"- 3/4" (increments of 1/16") | 0.0005" | 1/64" | 1.06" | 1.84" | 9455N15 | 0000000 |