Choose between rods that are polished to a brushed finish or a mirror-like finish.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

Debur, clean, and blend faster than other nylon mesh discs.

Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.

The heavy duty construction provides more support than standard discs for heavy material removal.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Used for stripping, these discs eliminate discoloration from heat buildup.

Press onto a compatible sanding tool or backup pad; peel off to remove.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating more consistent finishes.

With more flaps than standard discs, these last 30-40% longer.

The special shapes of these wheels provide more clearance than typical straight wheels.

The abrasive is already embedded in these nylon mesh wheels so you don’t need messy polishing compounds.

Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.

A glass-fiber filler gives this material increased rigidity over standard Delrin® acetal resin. Use it to machine manifolds, impellers, and other parts that require rigidity.

This material prevents the buildup of static charges.

The addition of MDS results in a nylon with exceptional wear resistance as well as self-lubricating properties.

Use these cast nylon 6 rods to make sheaves, bushings, and pulleys. All withstand higher temperatures and are easier to machine than standard nylon 6/6 rods.

Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.

Designed for extreme wear resistance, this Kevlar-filled nylon 6/6 material lasts up to 20 times longer than unfilled nylon. Also known as Hydlar Z, it is often used for parts that are continuously exposed to wear and abrasion, such as wear strips and bushings.

This nylon 6/6 material is modified with MDS for a self-lubricating surface that’s more slippery than standard nylon. It's often used in high-friction applications, such as gears and bearings.

This material suppresses static charges to prevent dust from building up.

This oil-filled material is self-lubricating for an extra-slippery surface.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Offering greater impact resistance than standard PVC Type 1 with similar chemical resistance, this PVC Type 2 is widely used for parts that are subject to shock.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

One of the softest and most flexible plastics we offer, LDPE is more formable than HDPE.

Often fabricated into signs, packaging, and light duty housings, polystyrene is easy to thermoform.

Polyester resists swelling in wet environments.

These black polyester rods protect from UV rays better than off-white polyester. Strong and semi-rigid, they won't swell in moist environments, so they're often made into valves, pump components, and spacers.

Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.

Also called reprocessed and mechanical-grade PTFE, this material is an economical alternative to standard PTFE.

Vespel® polyimide offers excellent strength, even at extreme temperatures.

Carbon enhances the stiffness of this material, while the addition of PTFE ensures a slippery surface.

Often used in food and pharmaceutical plants, these PEEK rods help you prevent contaminated products from leaving your facility.

Use these Torlon 4203 rods instead of standard Torlon PAI to create parts that not only withstand extreme temperatures, but also are electrical insulators.

Just as chemical resistant as PTFE, yet FEP offers greater impact strength. Use it to make valve components and gaskets.

Use PFA in place of PTFE and FEP for durability in repetitive processes, such as pump parts. It is chemical resistant across a wide temperature range.

When excellent chemical resistance is combined with an ability to hold tight tolerances, the result is PPS—a material that’s widely machined into parts for chemical-processing applications. It is comparable to Techtron and Ryton.

Offering excellent resistance to shock, PPSU is frequently fabricated into vehicle parts and machine components that are subject to vibration. It withstands higher temperatures than polysulfone and can handle repeated autoclaving cycles.

Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

These washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Choose these washers for their adherence to strict military standards for material and construction.

Low moisture absorption and good heat resistance make these washers suitable for wet and harsh environments.

These washers can withstand temperatures up to 450° or 500° F without degrading.

Plastic washers are good electrical insulators.

These washers have a flat bottom and high walls to protect metal screw heads from electrical current.

The extra-tall sleeve extends into holes to provide more protection than other rolled-collar washers.

These SBR rubber washers are reinforced with cloth fibers.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Use these wheels for cutting soft metal, plastic, stone, and wood.

The segmented edge on these blades is coated with diamond grit for cutting plastic.

A special fastener on the back of these brushes allows you to easily swap one brush for another.

A special fastener on the back of these brushes allows you to easily swap one brush for another.

Use on delicate surfaces.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

The bristles are twisted all the way to the end so they’re more rigid and clean fastest.

Rigid, twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs.

The abrasive lasts longer than that of standard brushes.

Often used in laboratory testing, these discs are designed to capture tiny particles from fluids.

Convenient for inline filtering, use these discs in pipe and tubing.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

Plastic tags withstand mild acids and are more corrosion resistant than metal tags.

Plastic tags withstand mild acids and are more corrosion resistant than metal tags.

The adhesive on these labels withstands temperatures from -320° to 170° F.

Add lockout symbols to an existing label or use alone to provide lockout reminders at a glance.