The probe tips come attached to mounting connections for fast installation.

The armored stainless steel cable resists wear, abrasion, and corrosion in humid and harsh conditions.

Thick wire with ceramic insulation stands up to extreme air temperatures in forging, die casting, and heat treating.

Trim these probes to the exact length you need with a pipe cutter.

Use these RTD probes for more stable air-temperature readings than thermocouple probes.

For fast installation, the tips of these RTD probes come attached to mounting connections.

Easy to set up and use, these transmitters measure liquid levels using a standard float gauge.

Best for measuring liquid levels in applications where traditional mounting is difficult, these transmitters sit at the bottom of your tank.

This switch mounts to the outside of your tank and detects chemical level through plastic tank walls by measuring the capacitance between the switch and tank contents; it cannot be used with metal tanks.

Designed for use in areas where flammable substances are present, these switches are CSA certified for hazardous locations.

Install these switches into a threaded connection in your tank wall from outside the tank.

Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank.

Empty and fill your tank with a single device—this dual-level switch includes two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Hang these free-floating switches in your tank for liquid-level monitoring that doesn't require installation through a tank wall.

Install these switches into a threaded connection in your tank wall from outside the tank.

For use in locations with flammable gases and combustible dust, this switch is UL listed and CSA certified for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Measure the level of conductive liquids without drilling a hole in your tank—these switches mount to the outside of the tank and track the capacitance between them and the tank’s contents.

Install these switches into a threaded connection in your tank wall from outside the tank.

Mount these switches through an unthreaded hole in your tank wall and secure with a nut from inside the tank.

For use in locations with flammable gases and combustible dust, this switch is UL listed and CSA certified for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Mount these switches through an unthreaded hole in your tank wall and secure with a nut from outside the tank.

Empty and fill your tank with a single device—these dual-level switches include two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Factory set to activate equipment when your drinking water system reaches a fixed level, these flow switches are easier to install than adjustable flow switches.

Link multiple detectors in tandem to warn occupants outside the vicinity about potential fire hazards; if one unit is activated, they're all activated.