Filter by
Shaft Diameter
Mounted Bearing Type
Housing Material
ID
Center Height
Overall Length
Bearing Material
Shaft Mount Type
Bearing Seal Type
Overall Width
Overall Height
Alignment Style
Bearing Type
For Load Direction
Lubrication
Dynamic Radial Load Capacity
Maximum Temperature
DFARS Specialty Metals
REACH
RoHS
Export Control Classification Number (ECCN)
Mounted Ball Bearings with Three-Bolt Flange
 |
Smoother than smooth—the balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation.
Lubricate regularly to keep your bearing in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.
Nickel-Plated Cast Iron Housing—Combine the strength of iron with the corrosion resistance of stainless steel at an affordable price point. Nickel-plated iron is also unlikely to chip.
Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.
Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ctr. Ht. | Lg. | Wd. | Flange Thk. | Dynamic Radial Load Cap., lb. | Max. Rotation Speed, rpm | Bearing Material | Bearing Seal Type | Misalignment Capability | Each | |||
Nickel-Plated Cast Iron Housing | |||||||||||||
Set Screw | |||||||||||||
| 1/2" | 2 23/32" | 2 7/16" | 1 1/4" | 1/2" | 2,850 | 5,500 | Steel | Sealed | 3° | 8260K46 | 000000 | ||
| 5/8" | 2 23/32" | 2 7/16" | 1 1/4" | 1/2" | 2,850 | 5,500 | Steel | Sealed | 3° | 8260K47 | 00000 | ||
| 3/4" | 3" | 2 1/2" | 1 11/32" | 5/16" | 2,200 | 7,500 | Steel | Sealed | 2° | 8260K11 | 000000 | ||
| 7/8" | 3 3/8" | 2 3/4" | 1 29/64" | 3/8" | 2,400 | 6,800 | Steel | Sealed | 2° | 8260K12 | 000000 | ||
| 15/16" | 2 53/64" | 2 11/16" | 1 3/8" | 1/2" | 3,100 | 5,000 | Steel | Sealed | 3° | 8260K48 | 00000 | ||
| 1" | 3 3/8" | 2 3/4" | 1 29/64" | 3/8" | 2,400 | 6,800 | Steel | Sealed | 2° | 8260K14 | 000000 | ||
| 1 1/8" | 3 3/4" | 3 1/4" | 1 5/8" | 3/8" | 3,350 | 5,600 | Steel | Sealed | 2° | 8260K15 | 000000 | ||
| 1 3/16" | 3 3/4" | 3 1/4" | 1 5/8" | 3/8" | 3,350 | 5,600 | Steel | Sealed | 2° | 8260K16 | 000000 | ||
| 1 1/4" | 3 3/4" | 3 1/4" | 1 5/8" | 3/8" | 3,350 | 5,600 | Steel | Sealed | 2° | 8260K17 | 000000 | ||
| 1 1/4" | 4 1/4" | 3 3/4" | 1 59/64" | 1/2" | 4,450 | 4,800 | Steel | Sealed | 2° | 8260K18 | 000000 | ||
| 1 5/16" | 3 7/16" | 3 17/32" | 1 3/4" | 19/32" | 5,750 | 3,500 | Steel | Sealed | 3° | 8260K49 | 00000 | ||
| 1 3/8" | 4 1/4" | 3 3/4" | 1 59/64" | 1/2" | 4,450 | 4,800 | Steel | Sealed | 2° | 8260K19 | 000000 | ||
| 1 7/16" | 4 1/4" | 3 3/4" | 1 59/64" | 1/2" | 4,450 | 4,800 | Steel | Sealed | 2° | 8260K21 | 000000 | ||
| 1 1/2" | 3 31/32" | 3 15/16" | 1 31/32" | 5/8" | 6,500 | 3,000 | Steel | Sealed | 3° | 8260K51 | 00000 | ||
| 1 5/8" | 4 1/4" | 4 3/16" | 1 31/32" | 23/32" | 7,650 | 3,000 | Steel | Sealed | 3° | 8260K52 | 00000 | ||
| 1 11/16" | 4 1/4" | 4 3/16" | 1 31/32" | 23/32" | 7,650 | 3,000 | Steel | Sealed | 3° | 8260K53 | 00000 | ||
| 1 3/4" | 4 1/4" | 4 3/16" | 1 31/32" | 23/32" | 7,650 | 3,000 | Steel | Sealed | 3° | 8260K54 | 00000 | ||
| 1 15/16" | 4 17/32" | 4 13/32" | 2 1/16" | 23/32" | 7,850 | 2,500 | Steel | Sealed | 3° | 8260K55 | 00000 | ||
| 2" | 4 17/32" | 4 13/32" | 2 1/16" | 23/32" | 7,850 | 2,500 | Steel | Sealed | 3° | 8260K56 | 00000 | ||
Food-and-Beverage Mounted Ball Bearings with Three-Bolt Flange
 |
Packed with NSF-registered H1 grease, these bearings are safe for use on food and beverage lines. Install them into conveyors, packaging systems, and other food processing applications where contact with ingredients is rare but possible. The balls roll nearly friction-free within a sturdy housing to support shafts as they turn. A good choice for tight spaces, these bearings mount with a three-bolt flange that only requires access from one side during installation.
Lubricate your bearings regularly to keep them in tip-top shape. Seals block out dust and contaminants.
304 Stainless Steel Housing—Prevent rust from exposure to moisture and mild chemicals, including ammonia-based cleaning solutions.
Polybutylene Housing—Lightweight and naturally rust-resistant, with a smooth surface that's easy to wipe clean.
Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.
Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.
Closed Caps—Mount on the end of the shaft to block out debris and prevent accidental contact with rotating parts.
Bearings | Closed Caps | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | ||||||||||||||||
For Shaft Dia. | Ctr. Ht. | Lg. | Wd. | Flange Thk. | Dynamic Radial Load Cap., lb. | Max. Rotation Speed, rpm | Bearing Material | Bearing Seal Type | Misalignment Capability | Enclosure Rating | Each | Each | ||||
304 Stainless Steel Housing | ||||||||||||||||
Set Screw | ||||||||||||||||
| 1/2" | 2 9/16" | 2 1/2" | 1 13/64" | 5/16" | 2,400 | 620 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N11 | 0000000 | ——— | 0 | ||
| 5/8" | 2 9/16" | 2 1/2" | 1 13/64" | 5/16" | 2,400 | 620 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N12 | 000000 | ——— | 0 | ||
| 3/4" | 2 9/16" | 2 1/2" | 1 13/64" | 5/16" | 2,400 | 620 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N13 | 000000 | ——— | 0 | ||
| 3/4" | 2 37/64" | 2 3/8" | 1 5/16" | 5/16" | 2,250 | 5,900 | 440 Stainless Steel | Sealed | 2° | — | 8260K22 | 000000 | 8260K41 | 000000 | ||
| 1" | 2 23/32" | 2 41/64" | 1 13/32" | 1/2" | 2,450 | 5,100 | 440 Stainless Steel | Sealed | 2° | — | 8260K23 | 000000 | 8260K42 | 00000 | ||
| 1" | 2 15/16" | 2 3/4" | 1 27/64" | 3/8" | 2,650 | 550 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N14 | 000000 | ——— | 0 | ||
| 1 1/4" | 2 23/32" | 3 1/8" | 1 37/64" | 1/2" | 3,400 | 4,300 | 440 Stainless Steel | Sealed | 2° | — | 8260K24 | 000000 | 8260K43 | 00000 | ||
| 1 1/4" | 2 53/64" | 3 35/64" | 1 3/4" | 1/2" | 4,500 | 3,700 | 440 Stainless Steel | Sealed | 2° | — | 8260K25 | 000000 | 8260K44 | 00000 | ||
| 1 1/4" | 3 5/16" | 3 1/4" | 1 37/64" | 3/8" | 3,700 | 480 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N15 | 000000 | ——— | 0 | ||
| 1 1/4" | 3 5/8" | 3 3/4" | 1 53/64" | 1/2" | 4,900 | 410 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N16 | 000000 | ——— | 0 | ||
| 1 7/16" | 3 7/16" | 3 35/64" | 1 3/4" | 19/32" | 4,500 | 3,700 | 440 Stainless Steel | Sealed | 2° | — | 8260K26 | 000000 | 8260K44 | 00000 | ||
| 1 7/16" | 3 5/8" | 3 3/4" | 1 53/64" | 1/2" | 4,900 | 410 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N17 | 000000 | ——— | 0 | ||
| 1 1/2" | 3 31/32" | 3 15/16" | 1 1/64" | 5/8" | 5,100 | 3,300 | 440 Stainless Steel | Sealed | 2° | — | 8260K27 | 000000 | 8260K45 | 00000 | ||
| 2" | 4 9/16" | 4 5/8" | 2 7/32" | 1/2" | 6,550 | 240 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N18 | 000000 | ——— | 0 | ||
| 20 mm | 65.5 mm | 64 mm | 34.5 mm | 8 mm | 2,400 | 620 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N19 | 000000 | ——— | 0 | ||
| 25 mm | 74.6 mm | 70 mm | 35.1 mm | 9.5 mm | 2,650 | 550 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N21 | 000000 | ——— | 0 | ||
| 30 mm | 84.2 mm | 83 mm | 40.1 mm | 9.5 mm | 3,700 | 480 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N22 | 000000 | ——— | 0 | ||
| 35 mm | 92.1 mm | 95 mm | 46.5 mm | 13 mm | 4,900 | 410 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N23 | 000000 | ——— | 0 | ||
| 50 mm | 115.9 mm | 118 mm | 54.9 mm | 13 mm | 6,550 | 240 | 440 Stainless Steel | Sealed | 2.5° | IP69K | 4454N24 | 000000 | ——— | 0 | ||
Polybutylene Housing | ||||||||||||||||
Set Screw | ||||||||||||||||
| 3/4" | 3" | 2 1/2" | 1 21/64" | 23/32" | 2,250 | 5,900 | 440 Stainless Steel | Sealed | 2° | — | 8260K28 | 000000 | 8260K35 | 00000 | ||
| 1" | 3 3/8" | 2 49/64" | 1 5/8" | 23/32" | 2,450 | 5,100 | 440 Stainless Steel | Sealed | 2° | — | 8260K29 | 000000 | 8260K36 | 00000 | ||
| 1 1/4" | 3 13/16" | 3 17/64" | 1 5/8" | 23/32" | 3,400 | 4,300 | 440 Stainless Steel | Sealed | 2° | — | 8260K31 | 000000 | 8260K37 | 00000 | ||
| 1 1/4" | 4 5/16" | 3 47/64" | 1 55/64" | 23/32" | 4,500 | 3,700 | 440 Stainless Steel | Sealed | 2° | — | 8260K32 | 000000 | 8260K38 | 00000 | ||
| 1 7/16" | 4 5/16" | 3 47/64" | 1 55/64" | 23/32" | 4,500 | 3,700 | 440 Stainless Steel | Sealed | 2° | — | 8260K33 | 000000 | 8260K38 | 00000 | ||
| 1 1/2" | 4 5/16" | 3 29/32" | 2 3/64" | 5/8" | 5,100 | 3,300 | 440 Stainless Steel | Sealed | 2° | — | 8260K34 | 000000 | 8260K39 | 00000 | ||
