Choose these locks if you need several that open with the same key. Locks arrive ready for single-point latching; for more holding power, add a latch conversion kit for two-point latching or two latch conversion kits for three-point latching (latch conversion kits sold separately).

Choose these L-handle locks if you need several that open with the same key. Use them for single-point latching, or add latch conversion kits (sold separately) for multipoint latching to create additional holding power.

Pair a handle with a cam latch and rod to create a keyed latching system that securely fastens doors at multiple points. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the handle a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration. The handle lies flat when locked, which means it won’t snag anything passing by. Choose these locks if you need several locks that open with the same key.

Create a keyed locking system that fastens doors at multiple points. The swing-handle lock rotates smoothly when you lift the handle to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. This lock is often installed on server cabinets and electrical panels. It comes with multiple cams, so you can change its fixed latching distance.

You first need a swing-handle lock, which acts as the base for these locks. Add a latch point by connecting an inline or 90° cam latch using a cam latch adapter (sold separately). For each latch point, you’ll need a cam latch, a rod, and two rod adapters. Weld cam latches to the inside of your enclosure door.

The ring handle is recessed to stay out of the way when not in use. These locks arrive ready for single-point latching; for more holding power, add a latch conversion kit for two-point latching or two latch conversion kits for three-point latching (latch kits sold separately). Select the turn direction of the locks when mounting the cam.