These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.

Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.

These nozzles have replaceable tips that are removable with a quarter-turn.

Quickly change spray angles by removing the nozzle and snapping on a new one.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

These nozzles project their spray at a right angle from their threaded connection.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

These nozzles provide a uniform distribution of droplets.

A check valve prevents the nozzle from dripping when it is turned off.

Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.

These nozzles provide a uniform distribution of droplets.

These nozzles produce a flat, thin spray pattern.

No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.

Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.

Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

Often used in sanitary environments, these nozzles are clog-resistant and have no moving parts to maintain.

Certified by 3-A to meet sanitary design standards, these stationary nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.

Circulate tank contents by pumping liquid through these nozzles.

These premium nozzles are engineered for the most efficient airflow consumption.

Control consumption and noise by adjusting the airflow.

The extra length allows access into hard-to-reach areas.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjust airflow to control consumption and noise.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

The magnetic base mounts to your work surface and has a control valve for adjusting airflow.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

These blowguns have a metal body.

The rubber tip won't damage parts.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

The included hose is ready to connect to your air supply.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

Maximize comfort and minimize strain with these lightweight guns.

The extra length lets you access hard-to-reach areas.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

Create a sheet of high-velocity air.

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.

Attach to a blower for high-speed airflow at low pressure.

Create a wide airflow that’s good for drying and stripping paint.

Concentrate a heat gun's airflow.

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Distribute heat evenly to avoid hotspots with these heavy duty multiflame burners.

Also known as Bunsen and Tirrill burners, separate controls adjust flame height and temperature. Connect to a gas line.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Loc-Line hose to assemble and disassemble components.

These nozzles handle coolant pressure up to 150 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.

Draw coolant from your existing tank.

These dispensers have a reservoir and controls for coolant flow.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Dispense from grease guns into grease fittings and bare lubrication points.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Sets include dispensing tips for grease fittings and bare lubrication points.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Dispense grease with the highest-pressure-rated gun we offer.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Turn a small tube of grease into a dispenser.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

This gun comes filled with 2 oz. of lithium-thickened grease.

Connect these guns to container-mount dispensers for controlled dispensing.

A display allows you to monitor how much grease is dispensed.

A needle dispensing tip provides fine control for lubricating small parts.

These dispensers have an opening for filling without removing the nozzle.

Use suction to remove old lubricant from gear boxes and transmissions.