A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel.

Made from Grade 5 steel, these inch-sized locknuts are suitable for fastening most machinery and equipment.

Get a grip on metric bolts exposed to vibration, wear, and changes in temperature. These metric locknuts have a nylon insert that holds onto bolts without damaging their threads.

Choose these locknuts for their adherence to strict military standards for material and construction. They’re low-strength steel, so they should be used for fastening panels and other light duty fastening applications.

These metric locknuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel locknuts, these locknuts have excellent resistance to chemicals and salt water.

One-third the weight of steel, aluminum locknuts resist corrosion in wet environments.

Titanium locknuts have a high strength-to-weight ratio and are resistant to acids and salt water.

With a shorter hex height than standard DIN 985 locknuts, these nylon-insert locknuts meet international ISO 10511 dimensional standards and are easy to install in tight spaces.

These Grade 8 locknuts are about 25% stronger than medium-strength steel thin locknuts.

These locknuts have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

Use these locknuts for light duty fastening applications, such as securing access panels.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

More corrosion resistant than 18-8 stainless steel locknuts, these have excellent resistance to chemicals and salt water.

These metric locknuts have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.

These metric stainless steel locknuts have good chemical resistance and may be mildly magnetic.

These locknuts have a curved washer that acts as a spring for easy installation and mild vibration resistance. The smooth rim makes them less likely to scratch materials when tightened than locknuts with a tooth lock washer.

These metric locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts.

About half the strength of medium-strength steel locknuts, these are for light duty fastening applications, such as securing access panels.

These locknuts have good chemical resistance.

These Grade 8 locknuts are about three times stronger than low-strength steel distorted-thread locknuts.

Strong enough for use with most machinery and equipment, these Class 8 metric locknuts have an irregularly shaped thread in the middle of the nut that grips bolts tighter than nylon-insert locknuts.

These locknuts have good chemical resistance.

Threads at the top of these metric locknuts expand to grip the bolt on all sides for a stronger hold than distorted-thread locknuts.

Made from 18-8 stainless steel, these flex top locknuts have good chemical resistance and may be mildly magnetic.

Choose these locknuts for their adherence to strict military standards for material and construction.

Stainless steel locknuts have excellent corrosion resistance in most environments.

Stainless steel locknuts have excellent corrosion resistance in most environments.

Secure these metric nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. Often referred to as castle nuts.

Stainless steel locknuts have excellent corrosion resistance in most environments.

The metric steel insert grips the threads and lifts away from the nut body when installed, isolating the insert from the nut's load to resist spinoff caused by vibration.

High-strength steel locknuts are about 25% stronger than medium-strength steel locknuts.

For a secure hold where chemicals are a concern, these stainless steel locknuts have a spring that creates tension when tightened. Also known as Fuji locknuts.

Strong enough for use in most machinery and equipment, these medium-strength metric nuts have serrations on the underside of the flange. The serrations prevent the nuts from loosening in applications with mild vibration.

They're about 25% stronger than medium-strength steel flange locknuts and comparable in strength to Class 10.9 bolts.

Made from 18-8 stainless steel, these flange locknuts have good chemical resistance and may be mildly magnetic

These flange locknuts have excellent resistance to chemicals and salt water.

Grade G nuts are comparable in strength to Grade 8 bolts.

Grip metric bolts more securely than nylon-insert flange locknuts—the irregularly shaped threads on these locknuts hold extra tight. They resist vibration and sudden shocks, even after multiple uses.

These flange locknuts have excellent resistance to chemicals and salt water. They have an irregularly shaped thread that grips the bolt for a stronger hold than nylon-insert flange locknuts.

An irregularly shaped thread grips the bolt for a stronger hold than nylon-insert cap locknuts.

Teeth bite into surfaces for easy installation and mild vibration resistance.