McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    2 Products

    Nylon-Insert Locknuts

    Image of Product. Front orientation. Locknuts. Nylon-Insert Locknuts.
    Versatile yet economical, these are the most commonly used locknuts. The nylon insert grips the screw to prevent loosening from moderate vibration without damaging threads. However, the insert may become brittle if exposed to high temperatures. These locknuts are reusable a handful of times, but the holding power decreases with each use.
    High-Strength Steel
    Rated Grade 8, Grade C, or Class 10, these locknuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.
    Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.
    Steel—Best for dry environments since moisture will cause these nuts to rust.
    Thread
    Size
    Wd.
    Ht.
    Fastener Strength
    Grade/Class
    Insert Max.
    Temp., ° F
    Pkg.
    Qty.
    Pkg.
    Zinc-Yellow-Chromate-Plated Steel
    1 1/4"-8
    		2 1/64"1 41/64"SAE Grade 8
    		185197135A404000000
     
    Steel
    1 1/4"-8
    		2 1/64"1 41/64"SAE Grade 8
    		185190630A21100000
     
    back to top