Install corrosion-resistant threads that align with off-center parts.

Add permanent threads to sheet metal, like weld nuts, but without the setup and mess. A zinc plating on these steel press-fit nuts helps prevent rust in wet environments.

Made from 18-8 stainless steel, these metric nuts withstand contact with water and chemicals better than zinc-plated steel nuts.

A plug on these press-fit nuts protects the threads inside during painting and other finishing processes.

Align off-center parts as you fasten them together—these steel press-fit nuts have floating threads, so you can install bolts at a slight angle.

Create corrosion-resistant threads in soft metal and plastic panels—these stainless steel press-fit nuts withstand exposure to water and chemicals.

Also known as broach-style captive nuts, these steel nuts add permanent threads to soft metal and plastic panels.

Made of steel, these rivet nuts add strong, reusable threads to sheet metal and other material that’s too thin to tap. The ribbed body on these nuts grips material better than smooth-body rivet nuts, so they won't twist when you tighten a screw.

Originally designed for Formula 1 racecars, these titanium rivet nuts are the best choice when you need a high strength-to-weight ratio—they're 40% lighter than steel nuts.

A ribbed body on these rivet nuts and wedges under the flange bite into soft materials such as brass, aluminum, and composites to prevent spinning when you tighten a screw.

Irregularly shaped threads in these nuts form a tight grip, preventing screws from backing out in vibration-heavy environments.

A PVC coating minimizes scratches to the surface of your material and makes these rivet nuts more corrosion resistant than zinc-plated steel nuts.

Install a rivet nut with only a screw—no special installation tool required.

Everything you need to add threads to sheet metal in low-clearance areas. Along with low-profile rivet nuts, these kits include mandrels and an installation tool.

Add strong, permanent threads to plastic and composites.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

With an angled head, these rivet nuts sit flush in countersunk holes.

The closed end on these nuts keeps debris from passing through the nut or damaging the threads.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Snap these nuts into square holes in thin materials.

Also known as U-style clip on nuts, these nuts have a barrel with multiple threads for secure thread engagement.

The S-style design provides more strength than other no-slip clip-on nuts.

A hex-shaped barrel allows these clip-on nuts to be gripped with a wrench to hold them in place when tightening a screw. They have multiple threads for more thread engagement than low-profile clip-on nuts.

These nuts firmly clip onto the edge of panels and stay secure.

Also known as G-style clip on nuts, slide these nuts on the edge of a panel and position them by hand.

Install in soft material such as aluminum and low-carbon steel at least 0.036" thick with an arbor press or similar pressure tool.

The base flares out during installation, creating a backside flange in hard materials and near edges in panels up to 0.312" thick. Install with a flare-in installation tool and an arbor press.

Install these thumb-screw-head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Push the plunger to secure and pull to release for quick access.

Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.

These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.

Press these rounded head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.

Press these rounded head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Tapered prongs or a snap-in ring securely hold these plugs in place.

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Sized for knockouts and conduit openings.

Sized for knockouts and conduit openings.

Sized for 22 mm and 30 mm push-button holes.

Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors.

Use four brackets to support the top and bottom edges of panels without drilling holes in them.

Fit brackets together to assemble truck racks, gates, crates, and fences.

Often used in washrooms, these brackets mount panels and partitions.

These brackets come in one piece that can be cut-to-size with a hacksaw.