McMaster-Carr logo
    Filter by
    Drive Anchor Type
    Fastener Head Type
    Industrial Info Compare
    Connection Hardware
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Drill Bit Decimal Size Equivalent
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    84 Products

    Drive Rivet Anchors for Block and Brick

    Fasten signs, security cameras, and motion detectors. All of these anchors have a rivet head that creates a secure connection with a finished look. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials. These anchors can be used in concrete near edges, corners, or other weak points, but they are not as strong as other drive rivet anchors for concrete.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    7/8"7/16"7/64"3/4"3/16"
    		SteelZinc4005604,000 psi ConcreteFM Approved
    		10097090A10200000
     
    1/4" Diameter
    3/4"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		5097090A1040000
    1"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1060000
    1"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		2597090A1300000
    1 1/4"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1080000
    1 1/4"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		2597090A1350000
    1 1/2"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1100000
    1 1/2"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		1097090A1400000
    2"9/16"9/64"5/8"1/4"
    		SteelZinc5806554,000 psi ConcreteFM Approved
    		2597090A1120000
    2"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		1097090A1450000
    3"9/16"9/64"1 1/4"1/4"
    		SteelZinc9909704,000 psi Concrete—1097090A1180000
     
    Easy-Release Screw Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Block and Brick, Easy-Release Screw Drive Anchors.
    To remove, unthread the screw to release the anchor's grip and then pull out the anchor.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Screw
    Material
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    1/4" Diameter
    3/4"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		5097090A305000000
    1"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		5097090A31000000
    1 1/4"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		2597090A3150000
    1 1/2"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		2597090A32000000
    2"9/16"5/32"5/8"1/4"
    		SteelZinc8508804,000 psi ConcreteFM Approved
    		2597090A32500000
     

    Vibration-Resistant Drive Anchors for Block and Brick

    Best for securing heavy machinery with constant motion, such as vibrating feeders and conveyors, to walls and floors, these anchors won’t shake loose. As you hammer in the pin, the anchor body expands while the ridges bite into your hole’s walls for a superior grip. These anchors require more force to install than sleeve anchors, so the block and brick you are installing them in should not be worn or cracked.
    To install, position the nut and insert the anchor through your machinery into a drilled hole. Then, hammer the pin until it's flush with the top of the bolt, ensuring the anchor is fully set.
    Pin Drive Anchors with Hex Nut
    Image of Product. Front orientation. Contains Annotated. Anchors. Vibration-Resistant Drive Anchors for Block and Brick, Hex Nut, Pin Drive Anchor.
    You can remove your machinery by unfastening the nut, but the anchor itself cannot be removed without prying out the pin.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Thread
    Ultimate
    Strength, lbf
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4" Diameter
    1 3/4"1/4"-20
    		5/8"1 1/8"1/4"
    		1,4801,0004,000 psi Concrete492960A10500000
    2 3/8"1/4"-20
    		3/4"1 1/8"1/4"
    		1,4801,0004,000 psi Concrete492960A1100000
     
    5/16" Diameter
    2"5/16"-18
    		3/4"1 1/2"5/16"
    		3,0801,2804,000 psi Concrete492960A1150000
    2 3/4"5/16"-18
    		1"1 1/2"5/16"
    		3,0801,2804,000 psi Concrete492960A12000000
     
    3/8" Diameter
    2 3/8"3/8"-16
    		1"1 7/8"3/8"
    		3,2803,4804,000 psi Concrete492960A12500000
    3 1/2"3/8"-16
    		1 1/8"1 7/8"3/8"
    		3,2803,4804,000 psi Concrete492960A13000000
    4 3/4"3/8"-16
    		1 3/8"1 7/8"3/8"
    		3,2803,4804,000 psi Concrete492960A13500000
     
    1/2" Diameter
    2 3/4"1/2"-13
    		1"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete492960A14000000
    3 1/2"1/2"-13
    		1 1/8"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete492960A14500000
    4 3/4"1/2"-13
    		1 3/8"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete492960A15000000
    6"1/2"-13
    		1 1/2"2 1/2"1/2"
    		5,6004,8004,000 psi Concrete192960A1550000
     
    5/8" Diameter
    4"5/8"-11
    		1 1/2"2 3/4"5/8"
    		7,6009,2004,000 psi Concrete192960A1600000
    6"5/8"-11
    		1 1/2"2 3/4"5/8"
    		7,6009,2004,000 psi Concrete192960A17000000
     
    Pin Drive Anchors with Tamper-Resistant Nut
    Image of Product. Front orientation. Contains Annotated, Inset. Anchors. Vibration-Resistant Drive Anchors for Block and Brick, Pin Drive Anchors with Tamper-Resistant Nut.
    A tamper-resistant nut prevents the unwanted removal of machinery. Turn the nut round side up for a domed look or flat side up to create a flush finish in countersunk holes. Once set, the nut can’t be removed. The only way to remove the machinery is to pry out the pin and remove the entire anchor.
    Steel—Best for dry environments since moisture will cause these anchors to rust.
    Ultimate
    Strength, lbf
    Lg.
    Thread
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Steel
     
    1/4" Diameter
    1 3/4"5/8"1"1/4"
    		1,2801,6004,000 psi Concrete1099080A120000000
    2 3/8"3/4"1"1/4"
    		1,2801,6004,000 psi Concrete499080A14000000
     
    3/8" Diameter
    2 3/8"1"1 1/2"3/8"
    		3,4003,4004,000 psi Concrete499080A36000000
    3 1/2"1 1/8"1 1/2"3/8"
    		3,4003,4004,000 psi Concrete599080A39000000
     

    Light Duty Drive Rivet Anchors for Block and Brick

    A step up from a nail, the rivet head creates a secure connection with a finished look for mounting lightweight signs, screens, and panels. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    3/4"9/16"1/8"3/4"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A017000000
    1"9/16"1/8"1"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A01000000
     
    1/4" Diameter
    3/4"9/16"7/64"3/4"1/4"
    		Acetal
    		NylonNot RatedNot Rated10097067A05000000
    3/4"9/16"1/8"3/4"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A01300000
    1"9/16"7/64"1"1/4"
    		Acetal
    		NylonNot RatedNot Rated10097067A05100000
    1"9/16"1/8"1"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A01600000
    1 1/2"9/16"7/64"1 1/2"1/4"
    		Acetal
    		NylonNot RatedNot Rated10097067A05200000
    1 1/2"9/16"1/8"1 1/2"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A04300000
     
    Easy-Release Screw Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Block and Brick, Easy-Release Screw Drive Anchors.
    To remove, unthread the screw to release the anchor's grip and then pull out the anchor.
    Head
    Ultimate
    Strength
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Screw Material
    Material
    Pull-Out
    Shear
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    1"7/16"1/8"1"3/16"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A020000000
     
    1/4" Diameter
    1"7/16"1/8"1"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A02600000
    1 1/2"7/16"1/8"1 1/2"1/4"
    		Zinc-Plated SteelNylonNot RatedNot Rated10097066A02800000
     

    Drive Rivet Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. Drive Rivet Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Concrete.
    Our strongest drive anchors are best for securing objects such as safety railings and warning signs. All have a rounded head that offers a finished look, won’t snag on objects, and is hard to grip, preventing unwanted removal. Often used for permanent installations, you can't remove your object without yanking the anchor out. These one-piece anchors compress when hammered in and expand inside a drilled hole, creating a powerful grip. No tightening is needed, making them quicker to install than wedge anchors.
    To install, hammer the anchor through your object into a drilled hole until the head is flush with the surface. The installation force stresses your base material, so avoid using the anchor near edges, corners, or in cracked surfaces.
    Zinc-Plated Steel—The most common choice for areas with occasional exposure to moisture.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these anchors won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
     
    1/4" Diameter
    1 1/4"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteFM Approved, UL Listed
    		2597073A544000000
    1 1/2"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteFM Approved, UL Listed
    		2597073A54600000
    2"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteFM Approved, UL Listed
    		2597073A55000000
    2 1/2"1/2"1/8"1 1/8"1/4"
    		1,6802,0004,000 psi ConcreteUL Listed
    		1097073A5530000
     
    3/8" Diameter
    2"3/4"3/16"1 7/8"3/8"
    		4,0006,8004,000 psi ConcreteFM Approved, UL Listed
    		1097073A62000000
    2 1/2"3/4"3/16"1 7/8"3/8"
    		4,0006,8004,000 psi ConcreteFM Approved, UL Listed
    		1097073A63400000
    3 1/2"3/4"3/16"1 7/8"3/8"
    		4,0006,8004,000 psi ConcreteFM Approved, UL Listed
    		597073A63800000
     
    1/2" Diameter
    3"1"1/4"2 5/8"1/2"
    		4,80010,0004,000 psi ConcreteFM Approved, UL Listed
    		597073A72000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    3/16" Diameter
    1"7/16"7/64"7/8"3/16"
    		8401,2004,000 psi Concrete—1097073A80000000
    1 1/2"7/16"7/64"7/8"3/16"
    		8401,2004,000 psi Concrete—597073A8200000
    2"7/16"7/64"7/8"3/16"
    		8401,2004,000 psi Concrete—597073A8300000
     
    1/4" Diameter
    1 1/4"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A8400000
    1 1/2"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A8500000
    2"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A86000000
    2 1/2"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A87000000
    3"1/2"7/64"7/8"1/4"
    		8401,6804,000 psi Concrete—597073A88000000
     

    Pin-Drive Rivets

    Image of ProductInUse. Installed in a Closed-End Hole. Top orientation. Contains Annotated, Border. Rivets. Pin-Drive Rivets.
    Image of ProductInUse. Installed in a Through-Hole. Top orientation. Contains Annotated, Border. Rivets. Pin-Drive Rivets.
    Image of Product. Front orientation. Contains Annotated. Pin-Drive Rivets.

    Installed in a Closed-End

    Hole

    Installed in a Through-Hole

    Hammer the pin into the body and it flares out for a secure hold. These rivets require access to only one side of the material and can be used in through-holes or closed-end holes.
    For Material
    Thk.
    Lg.
    For Hole
    Size
    For Drill
    Bit Size
    Head
    Dia.
    Head
    Ht.
    Shear Strength,
    lbf
    Tensile Strength,
    lbf
    Material
    Pkg.
    Qty.
    Pkg.
    3/16" Diameter
    0.094" to 0.156"0.313"0.191"13/64"0.375"0.094"4804002117 Aluminum5097510A499000000
    0.156" to 0.219"0.375"0.191"13/64"0.375"0.094"7003602117 Aluminum5097510A50000000
    0.219" to 0.281"0.438"0.191"13/64"0.375"0.094"Not RatedNot Rated2117 Aluminum5097510A50100000
    0.344" to 0.406"0.563"0.191"13/64"0.469"0.094"8105302117 Aluminum5097086A50500000
    0.469" to 0.531"0.688"0.191"13/64"0.469"0.094"Not RatedNot Rated2117 Aluminum5097086A50600000
    0.594" to 0.656"0.813"0.191"13/64"0.469"0.094"Not RatedNot Rated2117 Aluminum5097086A50800000
    0.969" to 1.031"1.188"0.191"13/64"0.469"0.094"6504602117 Aluminum2597086A5110000
     
    1/4" Diameter
    0.156" to 0.219"0.375"0.25"F0.5"0.125"1,0308102117 Aluminum5097510A53200000
    0.219" to 0.281"0.438"0.25"F0.5"0.125"9808102117 Aluminum5097510A53300000
    0.344" to 0.406"0.563"0.25"F0.5"0.125"1,0308102117 Aluminum2597510A53500000
    0.469" to 0.531"0.688"0.25"F0.5"0.125"1,0308102117 Aluminum2597510A53700000
    0.469" to 0.531"0.688"0.25"F0.625"0.125"1,1508202117 Aluminum2597086A5380000
    0.594" to 0.656"0.813"0.25"F0.5"0.125"1,0308102117 Aluminum2597510A5380000
    0.594" to 0.656"0.813"0.25"F0.625"0.125"1,1508202117 Aluminum2597086A5400000
    0.719" to 0.781"0.938"0.25"F0.625"0.125"1,1508202117 Aluminum1097086A5410000
    0.844" to 0.906"1.063"0.25"F0.625"0.125"1,1508202117 Aluminum1097086A5420000
    0.969" to 1.031"1.188"0.25"F0.625"0.125"1,1508202117 Aluminum1097086A5430000
    1.094" to 1.156"1.313"0.25"F0.625"0.125"1,1508202117 Aluminum1097086A5440000
    1.344" to 1.406"1.563"0.25"F0.625"0.125"1,1508202117 Aluminum1097086A5450000
     

    Light Duty Drive Rivet Anchors for Concrete

    Image of Product. Front orientation. Contains Annotated. Anchors. Light Duty Drive Rivet Anchors for Concrete.
    More secure than masonry nails but not as strong as other anchors for concrete, these are often used to mount lightweight signs and control panels. Also known as tap-in rivets, they’re barbed to resist pullout after being hammered into a hole. All have a rounded head for a finished look that won’t snag on objects.
    To install, hammer the anchor through your component into a drilled hole that’s slightly longer than the anchor until the head is flush with the surface. The anchor will compress and then expand inside the hole. To remove, pry out the anchor.
    Nylon—Strong, durable, and economical. Best for dry environments, these anchors will swell and weaken when exposed to moisture.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Nylon
     
    9/32" Diameter
    1"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete10092410A411000000
    1 5/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete5092410A41200000
    2 1/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete5092410A41300000
    2 5/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete2592410A41400000
    3 1/8"5/8"1/8"1"1/4"
    		1402204,000 psi Concrete2592410A41500000
     
    back to top