Pivot Gates | McMaster-Carr

Filter by

Mounting Location

Swing Angle

Color

Material

Opening Size

Length

Overall Width

Finish

Height

Between Frame Width

Width

REACH

Mounting Hole Diameter

Weight Capacity per Length

Roller Spacing

Roller Diameter

For Maximum Railing Diameter

1 7/8"

Mounting Position

Left-Hand Side

Right-Hand Side

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Closure Method

Adjustable Hydraulic Arm

RoHS

For Maximum Railing Width

Swing Direction

Specifications Met

147 Products

Mezzanine Gates


Unloading Position	Pivoting from Loading to Unloading Position

Protect workers from falling off elevated platforms as they transfer pallets. Like a seesaw, one side lowers as you raise the other, so a railing always blocks the ledge. The manufacturer weight tests the railing to meet OSHA requirements for guardrail systems. The third rail at floor level prevents pallets from hanging over the ledge or packages from slipping off. With bright yellow powder coating, they’re easy for forklift drivers to spot.

			Usable			Rail						Mounting Holes
Ht.	Wd.	Dp.	Ht.	Wd.	Dp.	Wd.	Dp.	Top Rail Ht.	Toeboard Ht.	Material	Color	No. of	Dia.	Mounting Hardware	Specs. Met		Each
80"	68 1/2"	79 1/4"	78 3/8"	56"	76 5/8"	1 1/2"	1 1/2"	42 3/8"	4"	Powder-Coated Steel	Yellow	16	7/16"	Fasteners Not Included	OSHA Compliant 29 CFR 1910.29	8244T72	0000000

Safety Gates

No need to shut these gates behind you—springs automatically do it for you. Gates can be mounted to swing open to the left or right.

Style A

Style A (Front)

Style A gates close softly for safety. You can also adjust their tension to change how quickly they close.

Galvanized Steel—Galvanized steel gates provide very good corrosion resistance.

304 Stainless Steel—304 stainless steel gates provide excellent corrosion resistance.

Powder-Coated Steel—Powder-coated steel gates offer some corrosion resistance and high visibility.

OSHA Compliant 29 CFR 1910.28—Gates that comply with OSHA 29 CFR 1910.28 meet standards for protection from falls and falling objects around walking-working surfaces.

OSHA Compliant 29 CFR 1910.29—Gates that meet OSHA 29 CFR 1910.29 fulfill requirements for guardrail systems.

			For Max. Railing			Arm				Mounting Holes				Galvanized Steel		Yellow Powder-Coated Steel		304 Stainless Steel
Mounting Location	For Opening Size	Ht.	Dia.	Wd.	Dp.	Wd.	Dp.	Swing Angle	Spring Material	No. of	Dia.	Mounting Hardware	Specs. Met		Each		Each		Each
Railing, Wall	15" to 20"	20 7/8"	2"	2"	2"	1 1/4"	1 1/4"	180°	Stainless Steel	4	5/16"	Connecting Fasteners Included	ANSI/ASSP A1264.1, OSHA Compliant 29 CFR 1910.28, OSHA Compliant 29 CFR 1910.29	4073K61	0000000	4073K65	0000000	4073K69	0000000
Railing, Wall	20" to 30"	20 7/8"	2"	2"	2"	1 1/4"	1 1/4"	180°	Stainless Steel	4	5/16"	Connecting Fasteners Included	ANSI/ASSP A1264.1, OSHA Compliant 29 CFR 1910.28, OSHA Compliant 29 CFR 1910.29	4073K62	000000	4073K66	000000	4073K71	000000
Railing, Wall	30" to 40"	20 7/8"	2"	2"	2"	1 1/4"	1 1/4"	180°	Stainless Steel	4	5/16"	Connecting Fasteners Included	ANSI/ASSP A1264.1, OSHA Compliant 29 CFR 1910.28, OSHA Compliant 29 CFR 1910.29	4073K63	000000	4073K67	000000	4073K72	000000
Railing, Wall	40" to 50"	20 7/8"	2"	2"	2"	1 1/4"	1 1/4"	180°	Stainless Steel	4	5/16"	Connecting Fasteners Included	ANSI/ASSP A1264.1, OSHA Compliant 29 CFR 1910.28, OSHA Compliant 29 CFR 1910.29	4073K64	000000	4073K68	000000	4073K73	000000

Replacements for Safety Gates

		Each
Replacement Spring Kit	4073K46	00000
Replacement U-Bolt Kit for Galvanized Steel and Yellow Powder-Coated Steel Gates	4073K52	00000
Replacement U-Bolt Kit for 304 Stainless Steel Gates	4073K53	00000

Style B

Style B (Front)

Style B gates have a low profile.

Galvanized Steel—Galvanized steel gates provide very good corrosion resistance.

316 Stainless Steel—316 stainless steel gates provide excellent corrosion resistance.

Powder-Coated Steel—Powder-coated steel gates offer some corrosion resistance and high visibility.

			For Max. Railing			Arm				Mounting Holes			Galvanized Steel		Yellow Powder-Coated Steel		316 Stainless Steel
Mounting Location	For Opening Size	Ht.	Dia.	Wd.	Dp.	Wd.	Dp.	Swing Angle	Spring Material	No. of	Dia.	Mounting Hardware		Each		Each		Each
Railing, Wall	17" to 18 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T23	0000000	8228T43	0000000	8228T44	0000000
Railing, Wall	19" to 21 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T1	000000	8228T3	000000	8228T45	000000
Railing, Wall	22" to 24 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T11	000000	8228T31	000000	8228T46	000000
Railing, Wall	25" to 27 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T12	000000	8228T32	000000	8228T47	000000
Railing, Wall	28" to 30 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T14	000000	8228T34	000000	8228T48	000000
Railing, Wall	31" to 33 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T16	000000	8228T36	000000	———	0
Railing, Wall	34" to 36 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T18	000000	8228T38	000000	8228T51	000000
Railing, Wall	37" to 39 1/2"	12"	2"	2"	2"	1 1/2"	1/4"	180°	Stainless Steel	6	11/16"	Connecting Fasteners Included	8228T21	000000	8228T41	000000	8228T52	00000000

Replacement Springs

		Each
Replacement Spring Kit	8228T889	000000

Style C

Style C (Front)

Style C gates adjust to fit a wide range of openings.

Galvanized Steel—Galvanized steel gates provide very good corrosion resistance.

304 Stainless Steel—304 stainless steel gates provide excellent corrosion resistance.

Powder-Coated Steel—Powder-coated steel gates offer some corrosion resistance and high visibility.

OSHA Compliant 29 CFR 1910.29—Gates that meet OSHA 29 CFR 1910.29 fulfill requirements for guardrail systems.

			For Max. Railing			Arm				Mounting Holes				Galvanized Steel		Yellow Powder-Coated Steel		304 Stainless Steel
Mounting Location	For Opening Size	Ht.	Dia.	Wd.	Dp.	Dia.	Adjustment Increments	Swing Angle	Spring Material	No. of	Dia.	Mounting Hardware	Specs. Met		Each		Each		Each
Railing, Wall	16" to 26"	21 1/2"	2"	2 1/2"	2 1/4"	1 1/4"	2"	90°	Stainless Steel	6	1/2"	Connecting Fasteners Included	OSHA Compliant 29 CFR 1910.29	8109T21	0000000	8109T31	0000000	8109T12	0000000
Railing, Wall	24" to 40"	21 1/2"	2"	2 1/2"	2 1/4"	1 1/4"	2"	90°	Stainless Steel	6	1/2"	Connecting Fasteners Included	OSHA Compliant 29 CFR 1910.29	8109T22	000000	8109T32	000000	8109T13	000000
Railing, Wall	40" to 48"	21 1/2"	2"	2"	2 1/4"	1 1/4"	2"	90°	Stainless Steel	6	1/2"	Connecting Fasteners Included	OSHA Compliant 29 CFR 1910.29	8109T41	000000	8109T42	000000	8109T43	000000

Replacement Springs

		Each
Replacement Spring Kit	8109T46	000000

Style D

Style D (Front)

Style D gates adjust to fit a wide range of openings and have adjustable tension. To attach them to your railing, drill holes through the railing and secure the gate using bolts (not included). These gates don't have to fit around the railing in order to attach to it.

Powder-Coated Steel—Powder-coated steel gates offer some corrosion resistance and high visibility.

OSHA Compliant 29 CFR 1910.29—Gates that meet OSHA 29 CFR 1910.29 fulfill requirements for guardrail systems.

			For Max. Railing						Mounting Holes				Red Powder-Coated Steel
Mounting Location	For Opening Size	Ht.	Dia.	Wd.	Dp.	Arm Dia.	Swing Angle	Spring Material	No. of	Dia.	Mounting Hardware	Specs. Met		Each
Railing, Wall	24" to 36"	20 1/2"	2"	2"	2"	1 3/8"	120°	Stainless Steel	3	7/16"	Fasteners Not Included	OSHA Compliant 29 CFR 1910.29	8109T11	0000000

Replacement Springs

		Each
Replacement Spring Kit	8109T901	000000

Style E

Style E (Front)

Style E gates have a locking latch to keep them closed.

Powder-Coated Steel—Powder-coated steel gates offer some corrosion resistance and high visibility.

OSHA Compliant 29 CFR 1910.29—Gates that meet OSHA 29 CFR 1910.29 fulfill requirements for guardrail systems.

										Black/Yellow Powder-Coated Steel
Mounting Location	For Opening Size	Ht.	For Max. Railing Dia.	Arm Dia.	Swing Angle	Spring Material	Mounting Hardware	Specs. Met	Features		Each
Railing	34 1/8"	22 7/8"	1 7/8"	1 7/8"	135°	Stainless Steel	Connecting Fasteners Included	OSHA Compliant 29 CFR 1910.29	Locking Latch	8109T54	0000000

Replacement Springs

		Each
Replacement Spring Kit	8109T46	000000

Soft-Close Safety Gates

A hydraulic arm allows these gates to close smoothly. They can be mounted to swing open to the left or right.

					Mounting Holes			Yellow Powder-Coated Steel
Mounting Location	For Opening Size	Ht.	Arm Wd.	Swing Angle	No. of	Dia.	Mounting Hardware		Each
Railing, Wall	15" to 31"	2"	3/4"	90°	2	7/16"	Fasteners Not Included	8147T81	0000000

Bollard Gates

Slide these gates over steel bollards to control access to parking lots and dock doors.

					For Bollard
Overall Lg., ft.	Ht.	Material Thk.	Material	Color	Dia.	Min. Ht.	Swing Direction	Specs. Met		Each
5	40 1/4"	1/8"	Powder-Coated Steel	Yellow	6 5/8"	40 1/4"	Two Way	OSHA Compliant 29 CFR 1910.29	5946T21	0000000
6	40 1/4"	1/8"	Powder-Coated Steel	Yellow	6 5/8"	40 1/4"	Two Way	OSHA Compliant 29 CFR 1910.29	5946T22	000000
7	40 1/4"	1/8"	Powder-Coated Steel	Yellow	6 5/8"	40 1/4"	Two Way	OSHA Compliant 29 CFR 1910.29	5946T23	000000
8	40 1/4"	1/8"	Powder-Coated Steel	Yellow	6 5/8"	40 1/4"	Two Way	OSHA Compliant 29 CFR 1910.29	5946T24	00000000
9	40 1/4"	1/8"	Powder-Coated Steel	Yellow	6 5/8"	40 1/4"	Two Way	OSHA Compliant 29 CFR 1910.29	5946T25	00000000
10	40 1/4"	1/8"	Powder-Coated Steel	Yellow	6 5/8"	40 1/4"	Two Way	OSHA Compliant 29 CFR 1910.29	5946T26	00000000

Bollards

	Ht.	Installed Ht.	Dia.
For 40 1/4" Ht. Bollard Gates





Bolt-In Mount
41 3/4"	—	6 5/8"	57895T69	0000000



In-Ground Mount
84"	42"	6 5/8"	57895T78	000000

Parking Gate Arms

Wood arms absorb impact better than aluminum or fiberglass, reducing damage to vehicles from accidental contact. Use these arms to replace the arm on a motor-powered parking gate. The black-and-white color pattern provides high visibility to approaching drivers, helping meet common traffic-control visibility requirements.

Lg., ft.	Ht.	Thk.	Material	Color		Each
8	4"	1"	Wood	Black/White	7104T41	0000000
10	4"	1"	Wood	Black/White	7104T42	000000
12	4"	1"	Wood	Black/White	7104T43	000000

Easy-Access Ready-To-Run Mini Belt Conveyors

Conveyor Shown Lifted

Run these conveyors right out of the box—they simply plug into an electrical outlet for power. The belts on these conveyors can move a wide range of small products, including electronic components, molded plastic parts, and other irregularly shaped parts that would catch on rollers and skate wheels. A good choice for quality checks, these conveyors have built-in speed controls and a flat belt surface that keeps objects steady as they move. Reverse the direction of travel with the flip of a switch. They’re small enough to fit in areas with limited space. Open the integrated lift gate for workers, dollies, and other equipment to safely pass through your line rather than going around the conveyor or over stairs. The height is adjustable to help you match existing setups. Continuous T-slots run along the sides of these conveyors for mounting side rails, guides, and custom equipment.

Note: Weight capacities are based on an evenly distributed load.

Reversible Variable Speed Lift Gate Conveyor—Aluminum Conveyor Bed with Smooth Polyurethane Rubber Belt

	Wd.						5 ft. Long			7 ft. Long
	Belt	Frame	Overall Ht.	Wt. Cap. (No. of Stands Req.)	No. of Stands Included	Features	Opening Lg.		Each	Opening Lg.		Each
120V AC— Plug In







				10 fpm to 58 fpm

				6"	6 5/8"	24" to 60"	30 lb. (2)	2	On/Off Switch	36"	5851N15	000000000	60"	5851N16	000000000


				8"	8 5/8"	24" to 60"	30 lb. (2)	2	On/Off Switch	36"	5851N102	00000000	60"	5851N103	00000000
				12"	12 5/8"	24" to 60"	30 lb. (2)	2	On/Off Switch	36"	5851N203	00000000	60"	5851N204	00000000

Replacements for Conveyors

Overall		Mounting Holes
3 3/16"	1 3/4"	Yes	2	9/32"	Zinc-Plated Steel	5851N13	000000

Replacement Gas Springs

Image of Attribute. Front orientation. Contains Annotated. Gas Springs. Easy-Access Ready-To-Run Mini Belt Conveyors.

								Body		Rod
	Extension Force, lbf	Compression Force, lbf	Extended Lg.	Compressed Lg.	Stroke Lg.	Max. Cycles per min., cpm	Max. Cycles	Dia.	Material	Dia.	Material	Temp. Range, ° F		Each
M8 × 1.25 mm Rod and M8 × 1.25 mm End Threads



		25	33	33.94"	17.8"	16.14"	6	25,000	0.85"	Steel	0.39"	Steel	-22 to 176	9416K401	000000


		50	66	33.94"	17.8"	16.14"	6	25,000	0.85"	Steel	0.39"	Steel	-22 to 176	9416K402	00000

High-Capacity Large-Diameter Roller Conveyors

For more demanding shipping and assembly applications, these conveyors can carry heavy loads.

Note: Weight capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. The length of the material you’re conveying should be at least three times the roller spacing.

Straight Conveyor

10 ft. Long—You can increase the weight capacity of a 10-ft. straight conveyor by adding a stand in the center.

Double-Shielded Bearing—Double-shielded bearings keep out dust and debris.

	Wd.		Roller						5 ft. Long			10 ft. Long
	Overall	Between Frame	Spacing	Projection	Frame Ht.	Bearing Seal Type	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
2 1/2" Dia. Steel Rollers—11/16" Hex Axle



		10"	7"	3"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K447	0000000	800 lb/ft (3), 375 lb/ft (2)	5746K451	0000000


		10"	7"	4 1/2"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K454	000000	800 lb/ft (3), 375 lb/ft (2)	5746K457	000000
		10"	7"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K461	000000	800 lb/ft (3), 375 lb/ft (2)	5746K469	000000
		12"	9"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K462	000000	—	———	0
		18"	15"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K463	000000	—	———	0
		24"	21"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K464	000000	—	———	0
		30"	27"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K465	000000	—	———	0
		36"	33"	3"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K448	000000	800 lb/ft (3), 375 lb/ft (2)	5746K452	00000000
		36"	33"	4 1/2"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K455	000000	800 lb/ft (3), 375 lb/ft (2)	5746K458	00000000
		36"	33"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K466	000000	800 lb/ft (3), 375 lb/ft (2)	5746K471	000000
		48"	45"	3"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K449	000000	800 lb/ft (3), 375 lb/ft (2)	5746K453	00000000


		48"	45"	4 1/2"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K456	000000	800 lb/ft (3), 375 lb/ft (2)	5746K459	00000000
		48"	45"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K467	000000	800 lb/ft (3), 375 lb/ft (2)	5746K472	00000000
		52"	49"	3"	1/4"	4"	Sealed	0	Connecting Plates	—	———	0	800 lb/ft (3), 375 lb/ft (2)	5746K473	00000000
		52"	49"	6"	1/4"	4"	Sealed	0	Connecting Plates	800 lb/ft (2)	5746K468	000000	—	———	0


		3 1/2" Dia. Steel Rollers—1" Hex Axle



				10 1/2"	7"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K474	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K483	00000000


				12 1/2"	9"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K475	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K484	00000000
				18 1/2"	15"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K476	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K485	00000000
				24 1/2"	21"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K477	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K486	00000000
				30 1/2"	27"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K478	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K487	00000000
				36 1/2"	33"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K479	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K488	00000000
				48 1/2"	45"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K481	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K489	00000000
				52 1/2"	49"	6"	3/8"	5"	Double Shielded	0	Connecting Plates	2,200 lb/ft (2)	5746K482	00000000	2,200 lb/ft (3), 1,100 lb/ft (2)	5746K491	00000000

Lift Gate Conveyor


Shown Lifted

Lift gate conveyors can be lifted up to let workers quickly and safely pass through, so they don’t have to walk around or climb stairs over conveyors to navigate their facility. In constrained environments, these conveyors give you flexibility in conveyor placement.

	Wd.							4 ft. Long
	Overall	Between Frame	Opening Lg., ft.	Roller Spacing	Frame Ht.	No. of Stands Included	Features	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
2 1/2" Dia. Steel Rollers—11/16" Hex Axle



		10"	7"	3 1/2	3"	4"	0	Connecting Plates	800 lb/ft (2)	5746K441	0000000


		12"	9"	3 1/2	3"	4"	0	Connecting Plates	800 lb/ft (2)	5746K442	000000
		18"	15"	3 1/2	3"	4"	0	Connecting Plates	800 lb/ft (2)	5746K443	000000
		24"	21"	3 1/2	3"	4"	0	Connecting Plates	800 lb/ft (2)	5746K444	00000000
		30"	27"	3 1/2	3"	4"	0	Connecting Plates	800 lb/ft (2)	5746K445	00000000
		36"	33"	3 1/2	3"	4"	0	Connecting Plates	800 lb/ft (2)	5746K446	00000000

Stationary Stand

Stands have adjustable mounting plates so you can set the conveyor at a decline.

					Conveyor Mounting Slot		Floor Mounting		Floor Mounting Slot
Height	Material	Color	Conveyor Mounting Fasteners Included	No. of Conveyor Mounting Holes	Lg.	Wd.	Fasteners Included	No. of Holes	Lg.	Wd.		Each







			For 10" Overall Width

			23" to 33"	Powder-Coated Steel	Blue	Yes	4	7/8"	7/16"	No	4	1"	7/16"	5746K492	0000000




					For 36" Overall Width

					23" to 33"	Powder-Coated Steel	Blue	Yes	4	7/8"	7/16"	No	4	1"	7/16"	5746K493	000000




							For 48" Overall Width

							23" to 33"	Powder-Coated Steel	Blue	Yes	4	7/8"	7/16"	No	4	1"	7/16"	5746K494	000000

High-Capacity Roller Conveyors

For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors. Whether you’re creating a straight line, a curve to route items around equipment, or a decline to lower them into a truck trailer, mixing and matching conveyors and stands lets you customize your system as needed. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes.

Because these conveyors don’t run on electricity, their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch. However, these high-capacity conveyors weigh about twice as much as standard ones, so they require more effort to move around.

Choose a small roller spacing when conveying small items to prevent them from getting stuck between rollers. For large items, a large roller spacing helps minimize friction between your material and the rollers.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Lift Gate Conveyor


Shown Lifted

Lift gate conveyors can be raised up like a drawbridge, so you can quickly and safely pass through instead of walking around or using stairs to climb over. This gives you more flexibility in placing your conveyor, especially in cramped working environments. They’re spring loaded for easy lifting. Connect them to existing conveyors and a lift gate stand using their mounting plate.

	Wd.									3" Roller Spacing
	Overall	Between Frame	Lg., ft.	Opening Lg., ft.	Projection	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included	Features		Each
1.9" Dia. Steel Rollers—7/16" Hex Axle



		13"	10"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N11	000000000


		16"	13"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N12	00000000
		18"	15"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N13	00000000
		20"	17"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N14	00000000
		24"	21"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N15	00000000
		36"	33"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N16	00000000
		40"	37"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N17	00000000
		42"	39"	4	3 1/2	1/4"	3 1/2"	620 lb/ft (2)	0	Connecting Plates	5874N18	00000000

Motorized Roller Conveyors

Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts. Unlike belt conveyors, these have built-in accumulation, so packages can build up without crashing into one another or falling off the conveyor. The rollers are designed to smoothly transfer totes, packages, and other lightweight material. Shipping tubes, drums, and pails are less likely to get stuck in between rollers than between skate wheels.

Mix and match stands and conveyors to form straight lines, curve around obstacles, or create inclines. Only straight conveyor sections contain a motor, but they can power up to 60 ft. of conveyor extensions on either side. The motor can be reversed to send material in either direction.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Lift Gate Conveyor


Conveyor Shown Lifted

Lift gate conveyors can be raised up like a drawbridge, so you can quickly and safely pass through your line. Install them in areas that don’t have room for crossover bridges to skip the long walk around. They’re spring-loaded, so they’re easier to lift than manual gates. Choose a lift gate with a drive shaft mounted to the same side as the conveyor you’re connecting it to. The drive shaft on curved conveyors is always mounted to the inside curve.

	Wd.			Roller		Ht.					6 ft. Long
	Overall	Between Frame	Opening Lg., ft.	Spacing	Projection	Frame	Overall	No. of Stands Included	Features	Choose a Drive Location	Wt. Cap. Per Lg. (No. of Stands Req.)		Each
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle



		16"	13"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K901	000000000


		17"	14"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K902	00000000
		19"	16"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K903	00000000
		21"	18"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K904	00000000
		25"	22"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K905	00000000
		29"	26"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K936	00000000
		31"	28"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K907	00000000
		35"	32"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K908	00000000
		41"	38"	3	3"	1/4"	5 1/2"	36" to 48"	1	Connecting Plates	Left Side, Right Side	40 lb/ft (2)	5898K909	00000000

Replacements for Conveyors

	For Conveyor Type
Drive Belts


Straight Section	5898K912	00000

Roller Drive Belts


—	5898K97	0000

Component		Each
Drive Spool	5898K71	00000

Component		Each
Drive Spool Retaining Clip	5898K72	00000

Roller Conveyors

Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.

These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.

Note: Weight capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.

Lift Gate Conveyor

Shown Lifted

Image of Attribute. Front orientation. Contains Annotated. Conveyors. Roller Conveyors, Lift Gate Conveyor.

Image of Attribute. Front orientation. Contains Annotated.

Lift gate conveyors can be raised like a drawbridge, so you can safely walk through your line. Install them in areas that don’t have room for crossover bridges to skip the long walk around your conveyor. The gate is spring loaded, which makes it easy to lift without effort. These conveyors have a mounting plate to connect to an existing conveyor.

Galvanized Steel Rollers—Conveyors with galvanized steel rollers carry heavier loads than conveyors with aluminum rollers.

	Wd.							3" Roller Spacing
	Overall	Between Frame	Lg., ft.	Opening Lg., ft.	Frame Ht.	Wt. Cap. Per Lg. (No. of Stands Req.)	No. of Stands Included		Each
1 3/8" Dia. Galvanized Steel Rollers—1/4" Dia. Round Axle



		12"	10"	3	2 1/2	2 1/2"	200 lb/ft (0)	0	5694N53	0000000


		18"	16"	3	2 1/2	2 1/2"	200 lb/ft (0)	0	5694N54	000000
		24"	22"	3	2 1/2	2 1/2"	200 lb/ft (0)	0	5694N55	000000

Overall			Mounting Holes
Lg.	Wd.	Mounting Fasteners Included	No. of	Dia.	Material		Each
3 3/16"	1 3/4"	Yes	2	9/32"	Zinc-Plated Steel	5851N13	000000