Often used in high-traffic environments, such as parking lots and cafeterias, these waste containers are dent resistant.

Open these plastic waste containers with your foot to discard trash without touching the lid.

These containers have two molded-in side handles and a durable bottom that stands up to dragging across the floor.

Prop these bags on the stand for convenient disposal anywhere you need it. They can be folded flat and require little space for storage.

Fill these containers with your dead batteries, then attach the included paid shipping label to send them to a recycling facility.

Made of plastic to resist harsh acids and corrosives, these safety cans have a self-closing cap to prevent spills and a trigger handle to empty contents with one hand.

Dispose of needles, razor blades, and other sharp objects with these sealable containers. They are also known as sharps containers and are puncture resistant.

Slip worn blades into the side slot and safely break them off inside container.

Safely dispose of cigarettes.

Ship materials in these UN-compliant drums.

Use these drums for secondary containment or for temporarily storing and transporting leaking containers.

Use the faucet on these batch cans for easy dispensing.

Designed for construction cleanup, these are the most durable bags we offer. They're tear resistant—not even a nail can rip them.

Line static-control waste containers with these conductive garbage bags to prevent damage to sensitive electrical equipment. When used in a static-control waste container that’s placed on a grounded floor, these bags drain static charges from waste.

Reduce landfill waste with these bags made from at least 70% recycled plastic.

Reduce your environmental impact by properly disposing of compost.

Often used in industrial laundry applications because they minimize contact with soiled fabrics, these bags dissolve completely at a minimum temperature of 150° F.

To handle the weight of wet sorbents, these bags are twice as thick as our extra heavy duty garbage bags. Bags are bright yellow and labeled “Used Sorbents” for easy identification.

These polypropylene liners are rated at least 70° higher than standard liners.

Made of PVC, these liners have excellent chemical resistance.

Don’t waste time cleaning—these liners are shaped to conform to the inside of your batch cans and can be tossed when you’re done.

These 12-gallon capacity tanks have a level gauge, and a fuel withdrawal outlet separate from the fill opening.

No need for separate spill-control pallets or trays—comply with EPA regulations for storing hazardous liquids with just one tank.

Despite their large size you can move these tanks with a forklift. They store between 75 and 500 gallons.

The heavy-wall construction makes these tanks durable and easy to clean.

A steel spring keeps these bags open when you need them, then collapses for compact storage.

Also known as Type I safety cans, these have a single opening for both filling and pouring.

Tip cans down for controlled dispensing, then swing them back to their upright position.

Wheel these hoppers around or transport with a forklift. Release the locking latch to dump the load.

Wheel these dump trucks around or move them with a forklift. Tilt to empty.

The top rim on these trucks is double-walled to handle the hardest knocks. They are made of lightweight plastic that resists dents, corrosion, and many chemicals.