We will reply to your message within an hour.
More
Regulate pressure in air and inert gas systems from your instrument panel—these valves have threads below the adjustment knob and come with a panel-mount nut.
For easy panel mounting in your water system, these valves have threads below the adjustment knob and come with a panel-mount nut.
Valves have NPT connections.
Push-to-connect fittings form a low-pressure seal around plastic or soft metal tubing.
Compression fittings bite down on hard metal and plastic tubing for a tighter seal than push-to-connect fittings.
A plastic body and fluoroelastomer seal stand up to harsh chemicals.
Threads below the adjustment knob and an included panel-mount nut allow you to add these valves to your instrument panel.
Less than a quarter of the height of standard pressure-relief valves, these are often installed on tanks in low-clearance areas.
For a low-pressure seal around plastic and soft metal tubing, these valves have push-to-connect fittings.
With a three-port design, these valves allow inline flow from the inlet to the outlet during normal conditions and divert flow through the relief port in overpressure conditions. They are often used with feed pumps for fertilizers and bleach.
These valves are often used with catalysts, pH buffers, and electroplating solutions.
A lighter and more corrosion-resistant alternative to metal vacuum-regulating valves.
Vent gases out of your container without letting dust, oxygen, and other contaminants in.
A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.
Use these regulators to adjust and maintain the pressure of your tubing air lines.
Mount these regulators to a 35 mm DIN rail with the included brackets.
Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.
A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.
Three components are combined in the same space as a filter alone. These units provide clean, lubricated compressed air at your required pressure.
With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
A plastic body withstands pH neutralizing, cleaning, and plating solutions containing sodium hydroxide, methyl ethyl ketone, and other harsh chemicals.
Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves meet NSF/ANSI 61, which means they’re safe to use with drinking water systems.