About Plastic
More
Slippery UHMW Polyethylene Film
- Color: Off-White
- Temperature Range: See Table
- Tensile Strength: 5,500-6,000 psi (Good)
- Impact Strength: Not Rated
- Hardness: Durometer 65D (Medium)
- For Use Outdoors: See Table
- Specifications Met: See Table
Widely used as a protective barrier against abrasion and wear, this UHMW film has a slippery surface that prevents sticking. This film is skived, so the edges may curl.
For adhesive-back film that is FDA compliant, the film meets the standard, but the adhesive does not.
For technical drawings and 3-D models, click on a part number.
12" × 12" | |||||||
|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | For Use Outdoors | Max. Temp., °F | Specifications Met | Adhesive Type | Each | |
Semi-Clear Adhesive-Back Film | |||||||
| 0.005" | -0.0006" to 0.0006" | Yes | 200° | ASTM D4020, FDA Compliant 21 CFR 177.1520 | Acrylic | 0000000 | 000000 |
| 0.007" | -0.0008" to 0.0008" | Yes | 200° | ASTM D4020, FDA Compliant 21 CFR 177.1520 | Acrylic | 0000000 | 00000 |
| 0.012" | -0.0012" to 0.0012" | Yes | 200° | ASTM D4020, FDA Compliant 21 CFR 177.1520 | Acrylic | 0000000 | 00000 |
| 0.022" | -0.0023" to 0.0023" | Yes | 200° | ASTM D4020, FDA Compliant 21 CFR 177.1520 | Acrylic | 0000000 | 00000 |
| 0.047" | -0.0043" to 0.001" | Yes | 200° | ASTM D4020, FDA Compliant 21 CFR 177.1520 | Acrylic | 0000000 | 00000 |
Porous PTFE Film
- Color: White
- Maximum Temperature: 500° F
- Specifications Met: UL 746C, UL 94 V-0
Shield vents on electronic and automotive equipment, such as cell phone microphones, from water, dirt, and debris without blocking them entirely. This film has tiny holes to let air, gas, and vapors pass through. Because it’s made of PTFE, it wicks away water. It also won’t react with most chemicals, though it can break down from alkali metal and high-temperature fluorinated agents. IP rated, this film stands up to dust, weather, washdowns, and even brief submersion.
For technical drawings and 3-D models, click on a part number.
Porous PTFE Adhesive-Back Discs
- Color: White
- Maximum Temperature: 250° F
Stick these discs onto breather and other circular vents to guard against water and dirt without obstructing flow. Often used in the electronic and automotive industries, they have very small holes so air, gas, and vapor can still pass through. These discs are made of PTFE to wick water away. They also won’t break down from most chemicals, except alkali metal and high-temperature fluorinated agents.
IP rated except for their adhesive, all seal out dust and stand up to some submersion. IP65-rated discs also handle low-pressure washdowns, while IP66-rated discs withstand high-pressure washdowns.
Adhesive | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thickness | Overall Thickness | Removes Particle Size Down To, microns | Airflow @ Surface Area | ID | Location | Type | Thickness | Environmental Rating | Pkg. Qty. | Pkg. | |
Small Pack | |||||||||||
1/2" Diameter | |||||||||||
| 0.007" | 0.015" | 0.4 | 0.28 cfm @ 1 sq. in. | 9/32" | Edge | Acrylic | 0.008" | IP67 | 50 | 0000000 | 000000 |
| 0.01" | 0.018" | 0.1 | 0.01 cfm @ 1 sq. in. | 9/32" | Edge | Acrylic | 0.008" | IP66, IP68 | 50 | 0000000 | 00000 |
| 0.01" | 0.018" | 0.1 | 0.09 cfm @ 1 sq. in. | 9/32" | Edge | Acrylic | 0.008" | IP65, IP68 | 50 | 0000000 | 00000 |
Large Pack | |||||||||||
1/2" Diameter | |||||||||||
| 0.007" | 0.015" | 0.4 | 0.28 cfm @ 1 sq. in. | 9/32" | Edge | Acrylic | 0.008" | IP67 | 100 | 0000000 | 00000 |
| 0.01" | 0.018" | 0.1 | 0.01 cfm @ 1 sq. in. | 9/32" | Edge | Acrylic | 0.008" | IP66, IP68 | 100 | 0000000 | 000000 |
| 0.01" | 0.018" | 0.1 | 0.09 cfm @ 1 sq. in. | 9/32" | Edge | Acrylic | 0.008" | IP65, IP68 | 100 | 0000000 | 00000 |