McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    122 Products

    Hot Air Gun Welding Kits

    Image of Product. Front orientation. Hot Air Welders. Hot Air Gun Welding Kits.
    No compressor needed—a hot-air gun welds your plastics.
    For Rod Dia.
    Input Voltage,
    V AC
    Wattage,
    W
    Airflow Rate,
    ft³/min
    Temp. Range,
    ° F
    Temp. Control
    Increment, ° F
    Cord Lg.,
    ft.
    No. of
    Blades
    Features
    Includes
    Each
    1/8", 5/32", 3/16", 7/32", 1/4"1201,5604 to 1875 to 1,2001062BluetoothHigh-Speed Tip for Rods Up to 1/4" Diameter
    Tip for Tack Welds
    3/8" Reducer for Attaching Tips
    5/8" Reducer for Concentrated Airflow
    1 Welding Iron for 3/8" Reducer
    1 1/4" Shrink Attachment for Tubing and Pipe
    4 Pieces of 4" × 3" Stainless Steel Wire Mesh Screens
    6 Pieces of 1/8" Diameter × 9" Long ABS Rod
    6 Pieces of 1/8" Diameter × 9" Long HDPE Rod
    6 Pieces of 1/8" Diameter × 9" Long LDPE Rod
    6 Pieces of 1/8" Diameter × 9" Long Polypropylene Rod
    6 Pieces of ⅛" Diameter × 9" Long PVC Rod
    6 Pieces of 3/16” Diameter × 12” Long Fiber-Flex Rods
    Plastic Carrying Case    		7890A140000000

    Plastic Spot Welder Kits

    Image of Product. Front orientation. Spot Welders. Plastic Spot Welder Kits.
    Weld stainless steel staple-like stakes into the surface of plastics to repair cracks.
    Input Voltage,
    V AC
    Wattage,
    mW
    Temp.,
    ° F
    Cord Lg.,
    ft.
    Plug Connection
    NEMA Type
    Includes
    Each
    120120575 to 87545-15
    		Resistance Welder
    100 M-Shaped Stakes for Tabs and Narrow Sections
    100 S-Shaped Stakes for Flat Surfaces
    100 V-Shaped Stakes for Inside Corners
    100 W-Shaped Stakes for Outside Corners    		1666N10000000
     
    Accessories and Replacements for Spot Welders
    Spot Welding Tips
    Image of Product. Front orientation. Spot Welding Tips.
    Spot welding tips smooth stitched areas for cleaner and faster repairs.
    Shape
    Pkg.
    Qty.
    Pkg.
    Wire21666N11000000
    Replacement Spot Welding Stakes
    Image of Product. Front orientation. Spot Welding Stakes. M-Shape.
    Image of Product. Front orientation. Spot Welding Stakes. S-Shape.
    Image of Product. Front orientation. Spot Welding Stakes. V-Shape.
    Image of Product. Front orientation. Spot Welding Stakes. W-Shape.

    M-Shape

    S-Shape

    V-Shape

    W-Shape

    Shape
    Pkg.
    Qty.
    Pkg.
    M251666N3000000
    S251666N200000
    V251666N400000
    W251666N500000

    Hot Air Welding Kits

    Use hot compressed air to weld plastics.
    Hot Air Welders
    Image of Product. Front orientation. Hot Air Welders. Hot Air Welding Kits.
    For Nitrogen Gas—Kits for nitrogen gas can be used when welding polyethylene or polypropylene to prevent possible oxidation (air bubbles).
    Temperature @
    3 psi, ° F
    For Rod Dia.
    Input Voltage,
    V AC
    Wattage, W
    Min.
    Max.
    Cord Lg.,
    ft.
    No. of
    Blades
    Includes
    Each
    For Use With Hot Air, Nitrogen Gas
    1/8", 5/32", 3/16"120450—70023Welding Torch
    Combination Tip for Tack and Continuous Welds
    12-ft. Air Hose with 1/4 NPT Male Fitting
    Air Regulator
    Pressure Gauge
    450-watt Heating Element
    Plastic Carrying Case    		7890A30000000
    1/8", 5/32", 3/16"120450, 550, 65070088023Welding Torch
    Combination Tip for Tack and Continuous Welds
    Tip for Tack Welds
    Tip for Continuous Welds
    12-ft. Air Hose with 1/4 NPT Male Fitting
    Air Regulator
    Pressure Gauge
    450-watt Heating Element
    550-watt Heating Element
    650-watt Heating Element
    Plastic Carrying Case    		7890A45000000
    1/8", 5/32", 3/16", 7/32", 1/4"120650, 7508801,02023Welding Torch
    Combination Tip for Tack and Continuous Welds
    Tip for Tack Welds
    12-ft. Air Hose with 1/4 NPT Male Fitting
    Air Regulator
    Pressure Gauge
    650-watt Heating Element
    750-watt Heating Element
    Plastic Carrying Case    		7890A126000000
     
    Accessories and Replacements for Hot Air Welders
    Replacement Welding Heating Elements
    Image of Product. Front orientation. Welding Heating Elements. Hot Air Welding Kits.
    Wattage,
    W
    Each
    4507890A28000000
    5507890A2900000
    6507890A2300000
    7507890A14600000
    Replacement Combination Tips
    Image of Product. Front orientation.
    For Rod Dia.
    Each
    Combination Tip
    1/8", 5/32", 3/16"7890A25000000
     
    High-Speed Tips
    Image of Product. Front orientation. High Speed.
    High-Speed Tips—High-speed tips heat the welding rod and the materials being welded at the same time to make fast, uniform welds.
    For Rod
    Dia.
    Each
    High Speed
    1/8", 5/32"7890A220000000
    3/16"7890A34000000
     
    Hot Air Welders with Built-In Air Compressor
    Image of Product. Front orientation. Hot Air Welders. Hot Air Welding Kits, Hot Air Welders with Built-In Air Compressor.
    Temperature @
    3 psi, ° F
    For Rod Dia.
    Input Voltage,
    V AC
    Wattage, W
    Airflow Rate @
    Pressure
    Min.
    Max.
    Cord Lg.,
    ft.
    No. of
    Blades
    Includes
    Each
    For Use With Hot Air
    1/8", 5/32", 3/16"120450, 5502.5 scfm @ 3 psi70080023Welding Torch
    Combination Tip for Tack and Continuous Welds
    12-ft. Air Hose with 1/4 NPT Male Fitting
    Air Regulator
    Pressure Gauge
    450-watt Heating Element
    550-watt Heating Element
    Plastic Carrying Case    		7885A12000000000
    1/8", 5/32", 3/16", 7/32", 1/4"120650, 7504.5 scfm @ 3 psi8801,02023Welding Torch
    Combination Tip for Tack and Continuous Welds
    Tip for Tack Welds
    12-ft. Air Hose with 1/4 NPT Male Fitting
    Air Regulator
    Pressure Gauge
    650-watt Heating Element
    750-watt Heating Element
    Plastic Carrying Case    		7890A13600000000
     
    Accessories and Replacements for Hot Air Welders
    Replacement Welding Heating Elements
    Image of Product. Front orientation. Welding Heating Elements. Hot Air Welding Kits.
    Wattage,
    W
    Each
    4507890A28000000
    5507890A2900000
    6507890A2300000
    7507890A14600000
    Replacement Combination Tips
    Image of Product. Front orientation.
    For Rod Dia.
    Each
    Combination Tip
    1/8", 5/32", 3/16"7890A25000000
     
    High-Speed Tips
    Image of Product. Front orientation. High Speed.
    High-Speed Tips—High-speed tips heat the welding rod and the materials being welded at the same time to make fast, uniform welds.
    For Rod
    Dia.
    Each
    High Speed
    1/8", 5/32"7890A220000000
    3/16"7890A34000000
     

    Heat Guns

    1 Temperature Setting
    Image of Product. Front orientation. Heat Guns. Heat Guns, 1 Temperature Setting.
    Heat gun with one temperature setting has a heating element that can be replaced for another with a different temperature setting (sold separately).
    Temp.
    Electrical
    Setting
    Control
    Airflow,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    NEMA
    Type
    Certification
    Includes
    Each
    120V AC
     
    Pistol
    650° FSwitch41"2 3/4"Plastic475Straight Blade35-15
    		C-UL Listed, UL Listed
    		Curved-Tip Nozzle for up to 1" OD Tubing
    Stand    		3414K110000000
     
    Accessories and Replacements for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style A. Heat Guns, Curved Tip.
    Image of Product. Front orientation. Style A. Heat Guns, Focused Tip.

    Curved Tip

    Focused Tip

    Tip
    Style
    Style
    Dia.
    Wd.
    Lg.
    For Max.
    Tube OD
    Each
    ACurved—1 5/16"2 1/4"7/8"3414K53000000
    AFocused1/4"—3"—3414K1300000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Style A. Heat Guns.

    Stands for Pistol Guns

    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    A5 3/4"4"2 3/4"Steel
    		3414K63000000
    Replacement Elements
    Each
    500° F Replacement Heating Element3414K14000000
    650° F Replacement Heating Element3414K1200000
    800° F Replacement Heating Element3414K1500000
    2 Temperature Settings
    Image of Product. Front orientation. Heat Guns. Heat Guns, 2 Temperature Settings.
    Temp.
    Electrical
    Setting
    Control
    Airflow, ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Each
    120V AC
     
    Pistol
    575° F, 950° FSwitch8, 131 5/16"1 1/2"Plastic1,300Straight Blade2UL Listed
    		3433K51000000
     
    Accessories and Replacements for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip.
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Style E. Heat Guns, Focused Tip.
    Image of Product. Front orientation. Style F. Heat Guns, Curved Tip, 1 1/2" Tip Width.

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Curved Tip

    1 1/2" Tip Width

    Image of Product. Front orientation. Style G. Heat Guns, Curved Tip, 3" Tip Width.
    Image of Product. Front orientation. Style H. Heat Guns, Curved Tip, 3/8" Tip Width.
    Image of Product. Front orientation. Style J. Heat Guns, Curved Tip, 5/8" Tip Width.

    Curved Tip

    3" Tip Width

    Curved Tip

    3/8" Tip Width

    Curved Tip

    5/8" Tip Width

    Tip
    Style
    Style
    Dia.
    Wd.
    Lg.
    For Max.
    Tube OD
    Each
    CFlat—2"2"—3433K72000000
    CFlat—3"2 5/8"—3433K3200000
    CFlat with Deflector—3"3 3/8"—3433K3400000
    EFocused5/8"—2 3/8"—3433K2800000
    EFocused3/4"—2"—3433K3100000
    FCurved—1 1/2"2 1/2"5/8"3433K3300000
    GCurved—3"4 3/16"3/4"3433K4600000
    HCurved—3/8"3 3/8"1/4"3433K3700000
    JCurved—5/8"2 1/8"1/4"3433K3500000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Style B. Heat Guns.

    Stands for Pistol Guns

    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    B7 7/8"6"5 1/16"Steel
    		3433K1090000000
    Heat Gun Replacement Parts and Replacement Elements
    Each
    Replacement Motor and Fan Assembly for Pistol Guns3433K481000000
    Replacement Heating Element for Pistol Guns3433K10100000
    3 Temperature Settings
    Image of Product. Front orientation. Heat Guns. Heat Guns, 3 Temperature Settings.
    Temp.
    Electrical
    Setting
    Control
    Airflow, ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Each
    120V AC
     
    Pistol
    120° F, 750° F, 1,100° FSwitch4, 7, 131 5/16"1 1/2"Plastic1,400Straight Blade2UL Listed
    		3433K520000000
     
    Accessories and Replacements for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip.
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Style E. Heat Guns, Focused Tip.
    Image of Product. Front orientation. Style F. Heat Guns, Curved Tip, 1 1/2" Tip Width.

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Curved Tip

    1 1/2" Tip Width

    Image of Product. Front orientation. Style G. Heat Guns, Curved Tip, 3" Tip Width.
    Image of Product. Front orientation. Style H. Heat Guns, Curved Tip, 3/8" Tip Width.
    Image of Product. Front orientation. Style J. Heat Guns, Curved Tip, 5/8" Tip Width.

    Curved Tip

    3" Tip Width

    Curved Tip

    3/8" Tip Width

    Curved Tip

    5/8" Tip Width

    Tip
    Style
    Style
    Dia.
    Wd.
    Lg.
    For Max.
    Tube OD
    Each
    CFlat—2"2"—3433K72000000
    CFlat—3"2 5/8"—3433K3200000
    CFlat with Deflector—3"3 3/8"—3433K3400000
    EFocused5/8"—2 3/8"—3433K2800000
    EFocused3/4"—2"—3433K3100000
    FCurved—1 1/2"2 1/2"5/8"3433K3300000
    GCurved—3"4 3/16"3/4"3433K4600000
    HCurved—3/8"3 3/8"1/4"3433K3700000
    JCurved—5/8"2 1/8"1/4"3433K3500000
    Safety Shields for Pistol Guns
    Image of Product. Front orientation. Heat Gun Nozzle Shields. Heat Guns.
    O'all
    Lg.
    Wd.
    Material
    Each
    4 5/8"2 3/4"Plastic3433K69000000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Style B. Heat Guns.

    Stands for Pistol Guns

    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    B7 7/8"6"5 1/16"Steel
    		3433K1090000000
    Heat Gun Replacement Parts and Replacement Elements
    Each
    Replacement Motor and Fan Assembly for Pistol Guns3433K482000000
    Replacement Heating Element for Pistol Guns3433K10200000
    9 Temperature Settings
    Image of Product. Front orientation. Contains Inset. Heat Guns. Heat Guns, 9 Temperature Settings.
    Temp.
    Electrical
    Setting
    Control
    Airflow, ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Each
    120V AC
     
    Pistol
    120° F to 1,100° FDial4, 6, 101 5/16"1 1/2"Plastic1,500Straight Blade2UL Listed
    		3433K540000000
     
    Accessories and Replacements for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style B. Heat Guns, Angled Tip for Welding.
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip.
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Style E. Heat Guns, Focused Tip.

    Angled Tip for

    Welding

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Image of Product. Front orientation. Style F. Heat Guns, Curved Tip, 1 1/2" Tip Width.
    Image of Product. Front orientation. Style G. Heat Guns, Curved Tip, 3" Tip Width.
    Image of Product. Front orientation. Style H. Heat Guns, Curved Tip, 3/8" Tip Width.
    Image of Product. Front orientation. Style J. Heat Guns, Curved Tip, 5/8" Tip Width.

    Curved Tip

    1 1/2" Tip Width

    Curved Tip

    3" Tip Width

    Curved Tip

    3/8" Tip Width

    Curved Tip

    5/8" Tip Width

    Nozzles for Pistol Guns—You can use the Style E nozzle with 3/8" tip diameter by itself to focus the heat from your gun. To use Style B for welding plastics with hot air, you'll also need Style E to act as an adapter.
    Tip
    Style
    Style
    Dia.
    Wd.
    For Welding
    Process
    Lg.
    For Max.
    Tube OD
    Each
    BAngled for Welding3/16"—Hot Air
    		2 1/2"—3433K41000000
    CFlat—2"—2"—3433K7200000
    CFlat—3"—2 5/8"—3433K3200000
    CFlat with Deflector—3"—3 3/8"—3433K3400000
    EFocused3/8"——2 1/2"—3433K2900000
    EFocused5/8"——2 3/8"—3433K2800000
    EFocused3/4"——2"—3433K3100000
    FCurved—1 1/2"—2 1/2"5/8"3433K3300000
    GCurved—3"—4 3/16"3/4"3433K4600000
    HCurved—3/8"—3 3/8"1/4"3433K3700000
    JCurved—5/8"—2 1/8"1/4"3433K3500000
    Safety Shields for Pistol Guns
    Image of Product. Front orientation. Heat Gun Nozzle Shields. Heat Guns.
    O'all
    Lg.
    Wd.
    Material
    Each
    4 5/8"2 3/4"Plastic3433K69000000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Style B. Heat Guns.

    Stands for Pistol Guns

    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    B7 7/8"6"5 1/16"Steel
    		3433K1090000000
    Heat Gun Replacement Parts and Replacement Elements
    Each
    Replacement Motor and Fan Assembly for Pistol Guns3433K482000000
    Replacement Heating Element for Pistol Guns3433K103000000
    Variable Temperature Settings
    Image of Product. Front orientation. Contains Inset. Heat Guns. Heat Guns, Variable Temperature Settings, Pistol, Temperature Control Button.
    Image of Product. Straight with Variable Temperature Settings And Temperature Control Dial. Front orientation. Contains Inset. Heat Guns. Heat Guns, Variable Temperature Settings, Straight, Temperature Control Dial.
    Image of Product. Straight with Variable Temperature Settings And Temperature Control Toggle. Front orientation. Contains Inset. Heat Guns. Heat Guns, Variable Temperature Settings, Straight, Temperature Control Toggle.

    Pistol

    Temperature Control Button

    Straight with Variable

    Temperature Settings And

    Temperature Control Dial

    Straight with Variable

    Temperature Settings And

    Temperature Control Toggle

    Temp.
    Electrical
    Setting
    Control
    Airflow, ft³/min
    Airflow Rate,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Includes
    Each
    120V AC
     
    Pistol
    120° F to 1,150° FButton4, 6, 10—1 5/16"1 1/2"Plastic1,600Straight Blade2UL Listed
    		—3433K550000000
     
    Straight
    70° F to 1,200° FDial7—1 3/16"4 1/4"Plastic1,600Straight Blade2—3/16" Dia. Focused-Tip Nozzle7880A41000000
    120° F to 1,300° FToggle—2 to 131 3/16"1 1/2"Plastic1,750Straight Blade2C-UL Listed, UL Listed
    		—3433K122000000
     
    Accessories and Replacements for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style B. Heat Guns, Angled Tip for Welding.
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip.
    Image of Product. Front orientation. Style C. Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Style E. Heat Guns, Focused Tip.

    Angled Tip for

    Welding

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Image of Product. Front orientation. Style F. Heat Guns, Curved Tip, 1 1/2" Tip Width.
    Image of Product. Front orientation. Style G. Heat Guns, Curved Tip, 3" Tip Width.
    Image of Product. Front orientation. Style H. Heat Guns, Curved Tip, 3/8" Tip Width.
    Image of Product. Front orientation. Style J. Heat Guns, Curved Tip, 5/8" Tip Width.

    Curved Tip

    1 1/2" Tip Width

    Curved Tip

    3" Tip Width

    Curved Tip

    3/8" Tip Width

    Curved Tip

    5/8" Tip Width

    Nozzles for Pistol Guns—You can use the Style E nozzle with 3/8" tip diameter by itself to focus the heat from your gun. To use Style B for welding plastics with hot air, you'll also need Style E to act as an adapter.
    Tip
    Style
    Style
    Dia.
    Wd.
    For Welding
    Process
    Lg.
    For Max.
    Tube OD
    Each
    BAngled for Welding3/16"—Hot Air
    		2 1/2"—3433K41000000
    CFlat—2"—2"—3433K7200000
    CFlat—3"—2 5/8"—3433K3200000
    CFlat with Deflector—3"—3 3/8"—3433K3400000
    EFocused3/8"——2 1/2"—3433K2900000
    EFocused5/8"——2 3/8"—3433K2800000
    EFocused3/4"——2"—3433K3100000
    FCurved—1 1/2"—2 1/2"5/8"3433K3300000
    GCurved—3"—4 3/16"3/4"3433K4600000
    HCurved—3/8"—3 3/8"1/4"3433K3700000
    JCurved—5/8"—2 1/8"1/4"3433K3500000
    Nozzles for Straight Guns with Temperature Control Dial
    Image of Product. Front orientation. Style C. Heat Guns, Angled Tip for Welding, 2 1/4" Long.
    Image of Product. Front orientation. Style D. Heat Guns, Angled Tip for Welding, 2 3/4" Long.
    Image of Product. Front orientation. Style F. Heat Guns, Focused Tip.

    Angled Tip for

    Welding, 2 1/4"

    Long

    Angled Tip for

    Welding, 2 3/4" Long

    Focused Tip

    Nozzles for Straight Guns with Temperature Control Dial—You can use the Style F nozzle by itself to focus the heat from your gun. To use Styles C and D for welding plastics with hot air, you'll also need Style F to act as an adapter.
    Style
    Tip Style
    For Welding
    Process
    Tip
    Dia.
    Lg.
    Each
    CAngled for WeldingHot Air
    		3/16"2 1/4"7880A45000000
    DAngled for WeldingHot Air
    		3/16"2 3/4"7880A4400000
    FFocused—3/16"2 3/4"7880A43000000
    Safety Shields for Pistol Guns
    Image of Product. Front orientation. Heat Gun Nozzle Shields. Heat Guns.
    O'all
    Lg.
    Wd.
    Material
    Each
    4 5/8"2 3/4"Plastic3433K69000000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Style B. Heat Guns.

    Stands for Pistol Guns

    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    B7 7/8"6"5 1/16"Steel
    		3433K1090000000
    Heat Gun Replacement Parts and Replacement Elements
    Each
    Replacement Motor and Fan Assembly for Pistol Guns3433K482000000
    Replacement Motor and Fan Assembly for Straight Guns with Temperature Control Toggle3433K117000000
    Replacement Heating Element for Pistol Guns3433K104000000
    Replacement Heating Element for Straight Guns with Temperature Control Dial7880A4200000
    Replacement Heating Element for Straight Guns with Temperature Control Toggle3433K106000000

    Ultrasonic Welders

    Use sound waves to heat up your materials and weld them together with these welders, guns, and tips. They create clean spot welds in seconds. Weld plastic to itself or to other materials, such as steel. These welders don’t use direct heat, so they’re less likely to distort or discolor your weld than hot-air welders.
    Welders
    Image of Product. Front orientation. Ultrasonic Welders. Welders.
    Input
    Overall
    Voltage,
    V AC
    Freq., Hz
    Current,
    amp
    Phase
    Output
    Power, W
    Ht.
    Wd.
    Dp.
    Cord Lg.,
    ft.
    Electrical
    Connection
    No. of
    Blades
    Features
    Each
    12050, 602Single1509 1/2"8"15 1/2"7Straight Blade3PLC Integration4665N11000000000
    Guns
    Image of Product. Front orientation. Ultrasonic Welders. Guns, Straight Grip.

    Straight Grip

    Image of Product. Front orientation. Ultrasonic Welders. Guns, Pistol Grip.

    Pistol Grip

    Guns are handheld and attach to your welder.
    Straight Grip—Straight-grip guns activate when you press them against your workpiece. They’re good for welding on a workbench and on other horizontal surfaces.
    Pistol Grip—Pistol-grip guns activate with a trigger on the handle. They’re good for welding on vertical surfaces.
    Grip
    Style
    Freq.,
    kHz
    Cable Lg.,
    ft.
    Each
    Straight2084665N12000000000
    Pistol2084665N1300000000
    Staking Tips
    Image of Product. Front orientation. Ultrasonic Welders. Staking Tips.
    Tips fit into your gun. Staking tips weld dissimilar materials, such as plastic to steel.
    For Max.
    Stake Ht.
    Tip
    Dia.
    Each
    0.05"1/2"4665N140000000
    0.1"1/2"4665N15000000
    0.15"1/2"4665N16000000
    0.2"1/2"4665N17000000
    0.25"1/2"4665N18000000
    0.3"1/2"4665N19000000
    Spot Tips
    Image of Product. Front orientation. Ultrasonic Welders. Spot Tips.
    Tips fit into your gun. Spot tips weld plastic to itself.
    For Max.
    Sheet Thk.
    Tip
    Dia.
    Each
    0.03"1/2"4665N210000000
    0.04"1/2"4665N22000000
    0.06"1/2"4665N23000000
    0.07"1/2"4665N24000000
    0.09"1/2"4665N25000000
    0.1"1/2"4665N26000000

    Programmable Heat Guns

    Image of Product. Front orientation. Contains Inset. Heat Guns. Programmable Heat Guns, Pistol.
    Image of Product. Front orientation. Contains Inset. Heat Guns. Programmable Heat Guns, Straight.

    Pistol

    Straight

    Save up to four temperature and airflow settings. A lockable override prevents unintentional changes to your settings.
    Temp.
    Electrical
    No. of
    Settings
    Setting
    Control
    Airflow Rate,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Each
    120V AC
     
    Pistol
    Variable120° F to 1,200° FButton4 to 131 3/8"1 1/2"Plastic1,600Straight Blade2UL Listed
    		3433K560000000
     
    Straight
    Variable120° F to 1,300° FToggle2 to 131 1/8"2 1/2"Plastic1,750Straight Blade2C-UL Listed, UL Listed
    		3433K1000000
     
    Accessories and Replacements for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style B. Programmable Heat Guns, Angled Tip for Welding.
    Image of Product. Front orientation. Style C. Programmable Heat Guns, Flat Tip.
    Image of Product. Front orientation. Style C. Programmable Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Style E. Programmable Heat Guns, Focused Tip.

    Angled Tip for

    Welding

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Image of Product. Front orientation. Style F. Programmable Heat Guns, Curved Tip, 1 1/2" Tip Width.
    Image of Product. Front orientation. Style G. Programmable Heat Guns, Curved Tip, 3" Tip Width.
    Image of Product. Front orientation. Style H. Programmable Heat Guns, Curved Tip, 3/8" Tip Width.
    Image of Product. Front orientation. Style J. Programmable Heat Guns, Curved Tip, 5/8" Tip Width.

    Curved Tip

    1 1/2" Tip Width

    Curved Tip

    3" Tip Width

    Curved Tip

    3/8" Tip Width

    Curved Tip

    5/8" Tip Width

    Nozzles for Pistol Guns—You can use the Style E nozzle with 3/8" tip diameter by itself to focus the heat from your gun. To use Style B for welding plastics with hot air, you'll also need Style E to act as an adapter.
    Tip
    Style
    Style
    Dia.
    Wd.
    For Welding
    Process
    Lg.
    For Max.
    Tube OD
    Each
    BAngled for Welding3/16"—Hot Air
    		2 1/2"—3433K41000000
    CFlat—2"—2"—3433K7200000
    CFlat—3"—2 5/8"—3433K3200000
    CFlat with Deflector—3"—3 3/8"—3433K3400000
    EFocused3/8"——2 1/2"—3433K2900000
    EFocused5/8"——2 3/8"—3433K2800000
    EFocused3/4"——2"—3433K3100000
    FCurved—1 1/2"—2 1/2"5/8"3433K3300000
    GCurved—3"—4 3/16"3/4"3433K4600000
    HCurved—3/8"—3 3/8"1/4"3433K3700000
    JCurved—5/8"—2 1/8"1/4"3433K3500000
    Safety Shields for Pistol Guns
    Image of Product. Front orientation. Heat Gun Nozzle Shields. Programmable Heat Guns.
    O'all
    Lg.
    Wd.
    Material
    Each
    4 5/8"2 3/4"Plastic3433K69000000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Style B. Programmable Heat Guns.

    Stands for Pistol Guns

    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    B7 7/8"6"5 1/16"Steel
    		3433K1090000000
    Heat Gun Replacement Parts and Replacement Elements
    Each
    Replacement Motor and Fan Assembly for Pistol Guns3433K483000000
    Replacement Heating Element for Pistol Guns3433K104000000

    Heat Guns for Shrink Wrap

    Image of Product. Front orientation. Heat Guns. Heat Guns for Shrink Wrap.
    Distribute heat over a wide area for large jobs. Connect to a propane fuel cylinder (sold separately) for shrink-wrapping objects with polyethylene film and other materials. This heat gun has a safety trigger that minimizes fire hazards; the flame extinguishes upon release.
    Temp.
    No. of
    Settings
    Setting
    Control
    Heat Output @ Pressure
    Propane Consumption,
    lb/hr
    Nozzle
    Lg.
    Housing
    Material
    Ignition
    Method
    Ignition
    Control
    Certification
    Includes
    Each
     
    Pistol
    11,200° FSwitch187,000 BTU/hr @ 27 psi8.655 1/4"PlasticSelf-IgniteTriggerUL Listed
    		25-ft. Lg. Hose
    Adjustable Regulator with Pressure Gauge
    Plastic Carrying Case
    Propane Tank Adapters
    Safety Shield    		30975K110000000
     
    Accessories and Replacements for Heat Guns
    Rebuild Kits
    Image of Product. Front orientation. Heat Gun Repair Kits. Heat Guns for Shrink Wrap.
    Includes
    Each
    Four O-Rings
    One Combustor
    One Gun Housing Assembly
    One Trigger/Igniter Assembly
    Two Retainers    		30975K130000000
    Heat Gun Extensions
    Image of Product. Front orientation. Heat Gun Extensions. Heat Guns for Shrink Wrap.
    Lg.,
    ft.
    Material
    Each
    4Aluminum
    		30975K120000000
    Heat Gun Replacement Parts
    Image of Product. Front orientation. Heat Gun Replacement Parts. Heat Guns for Shrink Wrap, Combustors.
    Image of Product. Front orientation. Heat Gun Replacement Parts. Heat Guns for Shrink Wrap, Hose Assemblies.
    Image of Product. Front orientation. Heat Gun Replacement Parts. Heat Guns for Shrink Wrap, Regulators.

    Combustors

    Hose Assemblies

    Regulators

    Image of Product. Front orientation. Heat Gun Replacement Parts. Heat Guns for Shrink Wrap, Trigger/Igniter Assemblies.
    Image of Product. Front orientation. Heat Gun Replacement Parts. Heat Guns for Shrink Wrap, Valve Assemblies.

    Trigger/Igniter

    Assemblies

    Valve Assemblies

    Component
    Hose Lg.,
    ft.
    Hose
    Material
    Each
    Combustor——30975K160000000
    Hose Assembly25Rubber
    		30975K17000000
    Regulator——30975K15000000
    Trigger/Igniter Assembly——30975K14000000
    Valve Assembly——30975K18000000

    Torch-Style Heat Guns for Shrink Wrap

    Image of Product. Front orientation. Heat Guns. Torch-Style Heat Guns for Shrink Wrap.
    Produce a concentrated flame for shrink-wrapping polyethylene film and other materials around small objects. Connect this gun to a propane fuel cylinder (sold separately).
    Temp.
    No. of
    Settings
    Setting
    Control
    Heat Output @
    Pressure
    Propane Consumption,
    lb/hr
    Nozzle
    Lg.
    Housing
    Material
    Thread
    Size
    Thread
    Type
    Gender
    CGA
    No.
    Ignition
    Method
    Ignition
    Control
    Each
     
    Straight
    13,500° FButton12,855 BTU/hr @ 28 psi0.6172 1/8"Plastic1"-20
    		UNF
    		Female600
    		Self-IgniteTrigger8015A46000000
     

    Static-Control Heat Guns

    Image of Product. Front orientation. Contains Inset. Heat Guns. Static-Control Heat Guns.
    Prevent buildup of electrostatic discharge (ESD) that can damage electronic components. Heat gun is programmable so you can save up to four temperature and airflow settings. A lockable override prevents unintentional changes to your settings.
    Heat Guns
    Replacement
    Elements
    Temp.
    Electrical
    No. of
    Settings
    Setting
    Control
    Airflow Rate,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Each
    Each
    120V AC
     
    Pistol
    Variable120° F to 1,200° FButton3.6 to 131 3/8"1 1/2"Plastic1,600Straight Blade3UL Listed
    		3433K5300000003433K1110000000
     
    Accessories for Heat Guns
    Nozzles for Pistol Guns
    Image of Product. Front orientation. Style B. Static-Control Heat Guns, Angled Tip for Welding.
    Image of Product. Front orientation. Style C. Static-Control Heat Guns, Flat Tip.
    Image of Product. Front orientation. Style C. Static-Control Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Style E. Static-Control Heat Guns, Focused Tip.

    Angled Tip for

    Welding

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Image of Product. Front orientation. Style F. Static-Control Heat Guns, Curved Tip, 1 1/2" Tip Width.
    Image of Product. Front orientation. Style G. Static-Control Heat Guns, Curved Tip, 3" Tip Width.
    Image of Product. Front orientation. Style H. Static-Control Heat Guns, Curved Tip, 3/8" Tip Width.
    Image of Product. Front orientation. Style J. Static-Control Heat Guns, Curved Tip, 5/8" Tip Width.

    Curved Tip

    1 1/2" Tip Width

    Curved Tip

    3" Tip Width

    Curved Tip

    3/8" Tip Width

    Curved Tip

    5/8" Tip Width

    Nozzles for Pistol Guns—You can use the Style E nozzle with 3/8" tip diameter by itself to focus the heat from your gun. To use Style B for welding plastics with hot air, you'll also need Style E to act as an adapter.
    Tip
    Style
    Style
    Dia.
    Wd.
    For Welding
    Process
    Lg.
    For Max.
    Tube OD
    Each
    BAngled for Welding3/16"—Hot Air
    		2 1/2"—3433K41000000
    CFlat—2"—2"—3433K7200000
    CFlat—3"—2 5/8"—3433K3200000
    CFlat with Deflector—3"—3 3/8"—3433K3400000
    EFocused3/8"——2 1/2"—3433K2900000
    EFocused5/8"——2 3/8"—3433K2800000
    EFocused3/4"——2"—3433K3100000
    FCurved—1 1/2"—2 1/2"5/8"3433K3300000
    GCurved—3"—4 3/16"3/4"3433K4600000
    HCurved—3/8"—3 3/8"1/4"3433K3700000
    JCurved—5/8"—2 1/8"1/4"3433K3500000
    Safety Shields for Pistol Guns
    Image of Product. Front orientation. Heat Gun Nozzle Shields. Static-Control Heat Guns.
    O'all
    Lg.
    Wd.
    Material
    Each
    4 5/8"2 3/4"Plastic3433K69000000
    Stands for Pistol Guns
    Image of ProductInUse. Front orientation. Heat Gun Stands. Static-Control Heat Guns.
    Overall
    Style
    Lg.
    Wd.
    Ht.
    Material
    Each
    B7 7/8"6"5 1/16"Steel
    		3433K1090000000

    Economy Heat Guns

    Image of Product. Front orientation. Heat Guns. Economy Heat Guns, Pistol, 2 Temperature Settings.
    Image of Product. Front orientation. Contains Inset. Heat Guns. Economy Heat Guns, Pistol, Variable Temperature Settings.

    Pistol

    2 Temperature Settings

    Pistol

    Variable Temperature Settings

    Choose these guns for occasional heating. Heating elements are not replaceable.
    Temp.
    Electrical
    No. of
    Settings
    Setting
    Control
    Airflow Rate,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Housing
    Material
    Wattage,
    W
    Connection
    No. of
    Blades
    Certification
    Includes
    Each
    120V AC
     
    Pistol
    2480° F, 680° FSwitch2.5 to 55/8"3/8"Plastic350Straight Blade2C-UL Listed, UL Listed
    		—32605K33000000
    2750° F, 1,100° FSwitch7.1 to 8.81 5/16"1 1/4"Plastic1,200Straight Blade2ETL Listed
    		—32605K5400000
    Variable150° F to 1,200° FButton7.1 to 9.91 5/16"1 1/2"Plastic1,500Straight Blade2ETL Listed
    		One 3 1/2" Wd. × 2 3/4" Lg. Deflecting Flat-Tip Nozzle
    One 3 1/2" Wd. × 3" Lg. Flat-Tip Nozzle    		32605K6500000
     
    Accessories for Heat Guns
    Nozzles for 1 ⁵⁄₁₆" Tip Dia. Guns
    Image of Product. Front orientation. Heat Gun Nozzles. Economy Heat Guns, Curved Tip.
    Image of Product. Front orientation. Heat Gun Nozzles. Economy Heat Guns, Flat Tip.
    Image of Product. Front orientation. Heat Gun Nozzles. Economy Heat Guns, Flat Tip with Deflector.
    Image of Product. Front orientation. Heat Gun Nozzles. Economy Heat Guns, Focused Tip.

    Curved Tip

    Flat Tip

    Flat Tip with Deflector

    Focused Tip

    Tip
    Style
    Style
    Dia.
    Wd.
    Lg.
    Each
    DFlat—3 1/2"3"32605K13000000
    DFlat with Deflector—3 1/2"2 3/4"32605K1200000
    GFocused1 1/2"—1 3/4"32605K1400000
    KCurved—1 5/8"2 1/2"32605K1100000
    Nozzle Sets for 1 ⁵⁄₁₆" Tip Dia. Guns
    Image of Product. Front orientation. Heat Gun Nozzles. Economy Heat Guns, 3 Pieces.

    3 Pieces

    No. of
    Pieces
    Includes
    Each
    3One 1 1/2" Dia. × 1 3/4" Lg. Focused-Tip Nozzle
    One 3 1/2" Wd. × 2 3/4" Lg. Deflecting Flat-Tip Nozzle
    One 3 1/2" Wd. × 3" Lg. Flat-Tip Nozzle    		32605K87000000

    Heat Guns with Adjustable Stand and Nozzle Sets

    Image of Product. Front orientation. Heat Guns. Heat Guns with Adjustable Stand and Nozzle Sets, 1 Temperature Setting.
    Image of Product. Front orientation. Heat Guns. Heat Guns with Adjustable Stand and Nozzle Sets, 9 Temperature Settings—Temperature Control Dial.
    Image of Specification. Dial Temperature Control. Front orientation. ZoomedIn view. Contains Border. Temperature Control Dial. Heat Guns with Adjustable Stand and Nozzle Sets.

    1 Temperature Setting

    9 Temperature

    Settings—Temperature Control

    Dial

    Dial

    Temperature

    Control

    Sets include a focused nozzle for concentrated airflow, a flat nozzle for heating wide surfaces, and curved nozzle for installing heat-shrink tubing. Tilt the gun on the built-in stand for hands-free use at multiple angles.
    Heat Guns
    Replacement
    Elements
    Electrical
    Temperature
    Setting
    Airflow,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Wattage,
    W
    Connection
    No. of
    Blades
    NEMA
    Type
    Certification
    Includes
    Each
    Each
    120V AC
     
    1 Temperature Setting
    400° F271 3/16"4 7/8"600Straight Blade35-15
    		C-UL Listed, UL Listed
    		2 1/4" Wd. Flat-Tip Nozzle
    7/8" Dia. Focused-Tip Nozzle
    Curved-Tip Nozzle
    Plastic Carrying Case
    Stand    		3149K4100000003149K31000000
    800° F271 3/16"4 7/8"1,440Straight Blade35-15
    		C-UL Listed, UL Listed
    		2 1/4" Wd. Flat-Tip Nozzle
    7/8" Dia. Focused-Tip Nozzle
    Curved-Tip Nozzle
    Plastic Carrying Case
    Stand    		3149K420000003149K3200000
    1,200° F271 3/16"4 7/8"1,740Straight Blade35-15
    		C-UL Listed, UL Listed
    		2 1/4" Wd. Flat-Tip Nozzle
    7/8" Dia. Focused-Tip Nozzle
    Curved-Tip Nozzle
    Plastic Carrying Case
    Stand    		3149K440000003149K2400000
     
    9 Temperature Settings—Temperature Control Dial
    100° F to 1,200° F271 3/16"4 7/8"1,740Straight Blade35-15
    		C-UL Listed, UL Listed
    		2 1/4" Wd. Flat-Tip Nozzle
    7/8" Dia. Focused-Tip Nozzle
    Curved-Tip Nozzle
    Plastic Carrying Case
    Stand    		3260K460000003149K2400000
     
    Accessories for Heat Guns
    Nozzles
    Image of Product. Front orientation. Style A. Heat Guns with Adjustable Stand and Nozzle Sets, Flat Tip.
    Image of Product. Front orientation. Style A. Heat Guns with Adjustable Stand and Nozzle Sets, Flat Tip with Deflector.
    Image of Product. Front orientation. Style B. Heat Guns with Adjustable Stand and Nozzle Sets, Curved Tip, 3 1/2" Long.

    Flat Tip

    Flat Tip with Deflector

    Curved Tip

    3 1/2" Long

    Image of Product. Front orientation. Style B. Heat Guns with Adjustable Stand and Nozzle Sets, Focused Tip, 7/8" Diameter Tip.
    Image of Product. Front orientation. Style C. Heat Guns with Adjustable Stand and Nozzle Sets, Curved Tip, 5" Long.
    Image of Product. Front orientation. Style C. Heat Guns with Adjustable Stand and Nozzle Sets, Focused Tip, 3/8" Diameter Tip.

    Focused Tip

    7/8" Diameter Tip

    Curved Tip

    5" Long

    Focused Tip

    3/8" Diameter Tip

    Tip
    Style
    Style
    Wd.
    Dia.
    Lg.
    Each
    AFlat2 1/4"—3"3149K731000000
    AFlat with Deflector4"—2 1/2"3149K7200000
    BCurved1 5/8"—3 1/2"3149K6200000
    BFocused—7/8"3"3149K9400000
    CCurved1 5/8"—5"3149K6300000
    CFocused—3/8"2 3/4"3149K6500000
    Heat Gun Cases
    Image of Product. Front orientation. Heat Gun Cases. Heat Guns with Adjustable Stand and Nozzle Sets.
    O'all
    Lg.
    Wd.
    Ht.
    Material
    Each
    15"13 1/2"6"Plastic3149K68000000
    Heat Gun Replacement Parts
    Each
    Switch Bezel Kit for All Heat Guns3149K911000000
    Nozzle Shield Kit for All Heat Guns3149K91200000
    Cord for 120V AC Heat Guns3149K91300000

    Heat Guns with Adjustable Stand

    Image of Product. Front orientation. Heat Guns. Heat Guns with Adjustable Stand, 1 Temperature Setting.
    Image of Product. Front orientation. Heat Guns. Heat Guns with Adjustable Stand, 9 Temperature Settings—Temperature Control Dial.

    1 Temperature Setting

    9 Temperature

    Settings—Temperature

    Control Dial

    Image of Specification. Dial Temperature Control. Front orientation. ZoomedIn view. Contains Border. Temperature Control Dial. Heat Guns with Adjustable Stand.

    Dial

    Temperature

    Control

    Image of Specification. NEMA 6-15. Front orientation. NEMA 6-15. Heat Guns with Adjustable Stand.

    NEMA

    6-15

    Tilt the gun on the built-in stand for hands-free use at multiple angles.
    Heat Guns
    Replacement
    Elements
    Electrical
    Temperature
    Setting
    Airflow,
    ft³/min
    Tip
    Dia.
    Nozzle
    Lg.
    Wattage,
    W
    Connection
    No. of
    Blades
    NEMA
    Type
    Certification
    Each
    Each
    120V AC
     
    1 Temperature Setting
    400° F271 3/16"4 7/8"600Straight Blade35-15
    		C-UL Listed, UL Listed
    		3149K1100000003149K31000000
    800° F271 3/16"4 7/8"1,440Straight Blade35-15
    		C-UL Listed, UL Listed
    		3149K120000003149K3200000
    1,200° F271 3/16"4 7/8"1,740Straight Blade35-15
    		C-UL Listed, UL Listed
    		3149K840000003149K2400000
     
    9 Temperature Settings—Temperature Control Dial
    100° F to 1,200° F271 3/16"4 7/8"1,740Straight Blade35-15
    		C-UL Listed, UL Listed
    		3260K510000003149K2400000
     
    240V AC
     
    1 Temperature Setting
    400° F271 3/16"4 7/8"660Straight Blade36-15
    		—3149K150000003149K2500000
    800° F271 3/16"4 7/8"1,320Straight Blade36-15
    		—3149K160000003149K2600000
    1,200° F271 3/16"4 7/8"1,980Straight Blade36-15
    		—3149K180000003149K2800000
     
    9 Temperature Settings—Temperature Control Dial
    100° F to 1,200° F271 3/16"4 7/8"1,980Straight Blade36-15
    		—3260K610000003149K2800000
     
    Accessories for Heat Guns
    Nozzles
    Image of Product. Front orientation. Style A. Heat Guns with Adjustable Stand, Flat Tip.
    Image of Product. Front orientation. Style A. Heat Guns with Adjustable Stand, Flat Tip with Deflector.
    Image of Product. Front orientation. Style B. Heat Guns with Adjustable Stand, Curved Tip, 3 1/2" Long.

    Flat Tip

    Flat Tip with Deflector

    Curved Tip

    3 1/2" Long

    Image of Product. Front orientation. Style B. Heat Guns with Adjustable Stand, Focused Tip, 7/8" Diameter Tip.
    Image of Product. Front orientation. Style C. Heat Guns with Adjustable Stand, Curved Tip, 5" Long.
    Image of Product. Front orientation. Style C. Heat Guns with Adjustable Stand, Focused Tip, 3/8" Diameter Tip.

    Focused Tip

    7/8" Diameter Tip

    Curved Tip

    5" Long

    Focused Tip

    3/8" Diameter Tip

    Tip
    Style
    Style
    Wd.
    Dia.
    Lg.
    Each
    AFlat2 1/4"—3"3149K731000000
    AFlat with Deflector4"—2 1/2"3149K7200000
    BCurved1 5/8"—3 1/2"3149K6200000
    BFocused—7/8"3"3149K9400000
    CCurved1 5/8"—5"3149K6300000
    CFocused—3/8"2 3/4"3149K6500000
    Heat Gun Replacement Parts
    Each
    Switch Bezel Kit for All Heat Guns3149K911000000
    Nozzle Shield Kit for All Heat Guns3149K91200000
    Cord for 120V AC Heat Guns3149K91300000
    back to top