Two curved openings on the jaws grip multiple sizes of round stock, tubing, and pipe.

With thinner tips than standard long-nose pliers, these tools fit into tight spaces.

Prevent damage to your workpiece.

Made of stainless steel, these pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Also known as duckbill and flat-nose pliers, the extra-wide tips give you better grip on your work. These stainless steel tools are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Made entirely of plastic, these pliers eliminate the potential for an arc flash or short circuit that can occur when using conventional insulated tools with metal components. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Extra-wide tips give you a better grip on your work. These pliers have insulated grips that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of materials that are FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Extra-wide tips give you a better grip on your work, and smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

A slim head and long, narrow jaws fit into tight spaces.

The bottom jaw is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

Colorful plastic grips make these pliers stand out, so they're less likely to be misplaced.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Sets contain an assortment of pliers styles. These tools are steel.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

Smooth, consistent movement ensures precision. These assorted pliers have slip-resistant ultra grips that are shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Prevent damage to your workpieces with pliers that have nonmarring jaws. Adjust the pivot point to switch between two different jaw opening sizes.

Colorful plastic grips make these pliers stand out, so they're less likely to be misplaced.

Removable and reusable, these rubber covers fit most slip-joint pliers and resist most oils and chemicals.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

When there isn't clearance to use standard-grip pliers, the angled head on these tools gives you access. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire.

Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s pliers, use them to pull, bend, and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to pull, bend, and cut wire.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws around a workpiece and they stay clamped in a vise-like grip.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

When there isn't clearance to use standard-grip locking pliers, the angled handle on these tools gives you access. Lock the jaws around a workpiece and these pliers stay clamped in place.

Secure these holders to a table or benchtop and slide in up to three pairs of locking pliers to create a hands-free way to hold your work.

Reach around closely spaced components and other obstructions. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Attach your locking pliers to a slide hammer to pull stubborn objects.

The jaws are made of brass, which won't damage steel workpieces. These pliers are shaped to reach around closely spaced components and other obstructions.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. They are shaped to reach around closely spaced components and other obstructions

Squeeze the handles to open the jaws; release to snap them closed. Once closed, they stay clamped in place to leave your hands free. These pliers reach around closely spaced components and other obstructions.

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They are shaped to reach around closely spaced components and other obstructions.

Made of beryllium copper that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as round-nose pliers, use for looping and bending wire.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Also known as round-nose pliers, use them for looping and bending wire.

The smallest round-nose pliers we offer allow you to bend and loop wire in the smallest spaces, including under a microscope.

Get the best possible grip on round objects, such as oil filters, connectors, and PVC pipe. Also known as cannon plug pliers, all of these pliers have curved jaws.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines. Squeeze the handles to lock the jaws and these pliers stay in place.

Keep hands away from machinery—use these lightweight tools to pick up and hold parts. The pliers-style handles provide more comfort and control than standard tongs.

Slide the upper jaw to adjust the opening size. These clamps hold larger workpieces than other locking plier clamps of similar size.

Press the lever down to lock these clamps, which fit in tight spaces and hold thin materials.

A removable, heavy duty steel base plate provides a flat, durable clamping surface. Carry it where needed or mount the base plate to your workbench.

The jaws on these tools apply outward pressure for use as a spreader.

The long, pivoting jaws let you clamp farther into your workpiece and in tight spots.

These clamps meet DIN VDE 0680-1 for protection against accidental contact with live electrical circuits.

Press the lever to lock the clamp onto material.

Hold large workpieces with a standard-size clamp. Slide the jaws to adjust the opening size.

Attached to an arm you can flex into position, these clamps hold objects such as a flashlight, tool, or instructions.

Clamp thin sheet material together without drilling holes. These clamps open with special pliers and spring closed when the pliers are released.

The grips are brightly colored to stand out.

The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).

These cutters are stainless steel, which provides excellent corrosion resistance.