About Precision Flow-Adjustment Valves
More
About On/Off Valves
More
Plastic On/Off Valves with Push-to-Connect Fittings for Drinking Water
- Valve Type: Plug
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Specifications Met: NSF/ANSI 61
Insert tubing into the fittings—no heat, solder, or flux required. These valves meet NSF/ANSI 61 for use in drinking water systems. All are full port, so they do not restrict flow.
For technical drawings and 3-D models, click on a part number.
Pipe Size | For Tube OD | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Port-to-Port Lg. | Each | |
White Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
90° Elbow—NPTF Female × Push to Connect | |||||||
1/4 | 1/4" | 230 psi @ 70° F | 35° to 140° | __ | 1 3/8" | 0000000 | 00000 |
1/4 | 3/8" | 145 psi @ 70° F | 35° to 140° | __ | 1 7/8" | 0000000 | 0000 |
Straight—NPTF Male × Push to Connect | |||||||
1/4 | 1/4" | 230 psi @ 70° F | 35° to 140° | 2" | __ | 0000000 | 0000 |
3/8 | 3/8" | 145 psi @ 70° F | 35° to 140° | 2 9/16" | __ | 0000000 | 0000 |
Straight—Push to Connect × Push to Connect | |||||||
__ | 1/4" | 230 psi @ 70° F | 35° to 140° | 1 15/16" | __ | 0000000 | 0000 |
__ | 3/8" | 145 psi @ 70° F | 35° to 140° | 2 1/2" | __ | 0000000 | 0000 |
__ | 6mm | 230 psi @ 70° F | 35° to 140° | 1 15/16" | __ | 0000000 | 00000 |
__ | 8mm | 230 psi @ 70° F | 35° to 140° | 2 1/2" | __ | 0000000 | 00000 |
__ | 10mm | 145 psi @ 70° F | 35° to 140° | 2 1/2" | __ | 0000000 | 00000 |
__ | 12mm | 145 psi @ 70° F | 35° to 140° | 2 3/4" | __ | 0000000 | 00000 |
On/Off Valves with Push-to-Connect Fittings
Insert tubing into the fittings on these valves—no heat, solder, or flux required.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: See table
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: EPDM Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
White Polypropylene Plastic Body—Plug Valve Type | ||||||||
---|---|---|---|---|---|---|---|---|
NPT Female × Push to Connect | ||||||||
1/4 | 1/4" | 0.5 | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 00000 |
1/4 | 3/8" | Not Rated | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
Plastic Threaded Precision Flow-Adjustment Valves
- Valve Type: Needle
- For Use With: Water, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: EPDM Rubber
Plastic provides a lightweight alternative to metal valves. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. These valves have a hex nut and threads below the handle for mounting through instrument panels.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
White Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
1/8 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2" | 0000000 | 000000 |
1/4 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2" | 0000000 | 00000 |
NPT Female × NPT Male | |||||||
1/8 | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 1/4" | 0000000 | 00000 |
1/4 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 3/8" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||
1/4 | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 11/16" | 0000000 | 00000 |
Optional Nickel-Plated Brass Mounting Nuts | 0000000 | Each | 00000 |
Precision Flow-Adjustment Valves with Barbed Fittings
- Valve Type: Needle
- For Use With: Water, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: EPDM Rubber
Barbs grip onto tubing, providing a secure hold. Turn the handle on these valves to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. All have a hex nut and threads below the handle for panel mounting.
For technical drawings and 3-D models, click on a part number.
For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
White Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
Barbed × Barbed | |||||||
1/4" | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 3 3/8" | 0000000 | 000000 |
3/8" | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 3 3/8" | 0000000 | 00000 |
1/2" | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 3 3/8" | 0000000 | 00000 |
Optional Nickel-Plated Brass Mounting Nuts | 0000000 | Each | 00000 |
Precision Flow-Adjustment Valves with Push-to-Connect Fittings
- Valve Type: Needle
- For Use With: Water, Air, Argon, Helium, Krypton, Neon, Xenon
- Seal Material: EPDM Rubber
Insert tubing into the fittings on these valves—no heat, solder, or flux required. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. All valves have a hex nut and threads below the handle for mounting through instrument panels.
For technical drawings and 3-D models, click on a part number.
For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Panel Cutout Dia. | End-to-End Lg. | Each | |
White Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
Push to Connect × Push to Connect | |||||||
1/4" | 0.3 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 13/16" | 0000000 | 000000 |
3/8" | 0.4 | 125 psi @ 140° F | 35° to 140° | 7/8" | 2 13/16" | 0000000 | 00000 |
Optional Nickel-Plated Brass Mounting Nuts | 0000000 | Each | 00000 |
Threaded Precision Flow-Adjustment Valves for Chemicals
To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a fluoroelastomer seal and a plastic body. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Needle
- For Use With: Water, Citric Acid, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Salt Water, Soap Solutions
- Seal Material: Fluoroelastomer Rubber
- Seat Material: PTFE Plastic
- Needle Material: Polypropylene Plastic