Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

Protect your mated connections from moisture and light splashing.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Add a fuse to protect equipment from current overload.

A rubber housing protects these connectors from damage caused by drops and impact.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Quickly mate these connectors by pushing them together. They're often used with 12 mm proximity switches and valves in automated systems.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Also known as dummy plugs, these plugs close the electrical circuit on your mini connector, so you can safely change devices or repair connections.

Simplify wiring and reduce the number of cords in your automation setup.

Send higher current than M12 connectors to automated systems, motors, and pumps in environments where washdowns are common.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

Keep personnel safe from electric shock with ground fault protection.

Change the connection style between an outlet and your equipment.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Give the connectors on these cords a quarter turn to lock in place.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

Power multiple devices with one extension cord.

Keep personnel safe from electric shock with these cords.

Attach these splitters to an extension cord to power multiple devices from one cord.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Make quick, secure connections between your development board and your system’s components, such as sensors and actuators.

The shielding blocks signal interference from nearby equipment and devices.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

Connect computers, servers, and switches in a fiber-optic network.

Use with DIN 3 rail. Add as many circuits as you need with these terminal blocks and accessories.

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Guard the corners of fragile materials such as glass and mirrors.

Stretch these caps over flared edges such as flanged tubing and valve handles.

Protect your hearing in loud environments.