About Finishing
More
No-Mess Polishing Bobs for Aluminum, Soft Metals, and Nonmetals
The silicon carbide abrasive cuts quickly with light pressure. It’s embedded in these bobs so you don’t need messy compounds. Polish small areas and hard-to-reach spots using a drill or grinder for bits and burs. Grit is approximate.
For technical drawings and 3-D models, click on a part number.
No-Mess Polishing Bobs for Stainless Steel and Hard Metals
The long-lasting diamond abrasive is already embedded in these bobs so you don’t need messy compounds. Polish small areas and hard-to-reach spots using a drill or grinder for bits and burs. Grit is approximate.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Abrasive Material | Material | For Finish | Choose a Grit | Each | |
For Use On Stainless Steel, Titanium, Steel, Iron, Nickel | |||||||||
Cone with Rounded Tip | |||||||||
| 3/8" | 1/2" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 | |
| 1/2" | 1" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 | |
| 3/4" | 1 1/2" | 1/4" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 | |
Multipurpose No-Mess Polishing Bobs
The abrasive is already embedded in these bobs so you don’t need messy compounds. Polish small areas and hard-to-reach spots using a drill or grinder for bits and burs. Grit is approximate.
Polyurethane bobs are harder than neoprene so they hold their shape longer, even during heavy use.
For technical drawings and 3-D models, click on a part number.
Head | |||||||
|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use On Steel | |||||||
Cone with Rounded Tip—Polyurethane Rubber | |||||||
| 3/8" | 1/2" | 1/8" | 15,000 | Aluminum Oxide | 0000000 | 00000 | |
Polishing Bobs
Polish small areas and hard-to-reach spots. Use these bobs with lapping pastes and buffing compounds and a drill or grinder for bits and burs.
Choose soft bobs for a finer finish.
For technical drawings and 3-D models, click on a part number.
Head | Soft | Medium | ||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Material | Each | Each | ||
Cone with Flat Tip | ||||||||
| 1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
Cone with Rounded Tip | ||||||||
| 1/2" | 1" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
| 3/4" | 1 1/2" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
| 1" | 2" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
Aggressive Polishing Bobs
Remove scratches from your workpiece with these hard bobs. Use them with lapping pastes and buffing compounds and a drill or grinder for bits and burs.
Choose rock hard bobs for the most aggressive material removal or when working with hard materials.
For technical drawings and 3-D models, click on a part number.
Head | Hard | Rock Hard | ||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Material | Each | Each | ||
Cone with Flat Tip | ||||||||
| 1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
| 3/4" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
Cone with Rounded Tip | ||||||||
| 1/2" | 1" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
| 3/4" | 1 1/2" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
| 1" | 2" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |