These bobs have a long-lasting diamond abrasive.

Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.

Loose layers of cloth conform to curves and contours.

Layers of cloth are sewn together, making these wheels more rigid than those for curved surfaces.

Holes in the hub allow air to flow through so the wheel stays cool and compound lasts longer. Also known as airway buffs.

Loose layers of cloth conform to curves and contours. Also known as jewelers’ buffs.

The edge of the wheel is tapered for polishing joints, grooves, and crevices.

Use these rigid wheels to remove gouges and scratches from metal workpieces.

The layers of sisal are sewn together for maximum rigidity and resistance to fraying.

The abrasive is already embedded in these nylon mesh wheels so you don’t need messy polishing compounds.

The wheel flares out as it spins for use on depressions and curved surfaces.

Made of loose layers of cotton.

Remove buildup and fluff packed-down bonnets to extend their life.

A special fastener on the back of these flexible discs allows you to easily swap one disc for another. Use with a backup pad on grinders for bits and burs.

Each of these sets comes with four differently shaped stones.

Remove surface scale left by the EDM (electrical discharge machining) process.

The abrasive is specially treated for use on aluminum, brass, bronze, and other soft metal molds and dies.

Choose between a set of six water-soluble pastes or a set of six oil-soluble pastes.

Thinner than paste for easier, even spreading over flat surfaces.

This fast-lapping paste abrades quickly to produce a level, scratch-free surface.

Produce a level, scratch-free surface.

An additive makes this paste stick to your workpiece, so it's good for lapping curves and contours. It thins during use for even application and easy cleanup.

This film abrades quickly and prevents material buildup.

Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.

The grains break down during use so they function first as an abrasive and then as a polish.

Remove tarnish, oxidation, and light scratches from parts with fine detail or engraving.

Often used as the final step after other media, this type of media is also good for use on fragile parts and won't contaminate nonferrous materials.

Good for light material removal, this media leaves an extra-smooth matte finish.

Produce a shiny surface on most metals.

The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.

Debur, clean, and blend faster than other nylon mesh discs.

Holes in the disc let you see the surface you’re sanding.

The backing cushions the abrasive to prevent gouging your work surface.

The abrasive in these blocks wears evenly to maintain a flat surface. They can be used to remove burrs from metal die fixtures and machine parts or to clean magnetic chucks.

Access tight spots. These sticks are spring-loaded to hold a small sanding belt taut, but you can easily rotate the belt when it becomes worn.

These hones have a long-lasting diamond abrasive.

The flexible shank on these hones gives you access to hard-to-reach spots. A knurled adjustment knob lets you adjust the pressure applied to the side of the cylinder to achieve your desired finish.

The shank on these spindles installs directly into grinder collets and drill chucks.

Use one of these spindles to mount buffing wheels to the tapered shaft on your grinder or buffer.

Install cutoff wheels, grinding wheels, and other abrasive discs to the threaded shaft on bench-top motors, grinders, and buffers.

Mount cutoff wheels, grinding wheels, and other abrasive discs to the straight shaft on bench-top motors, grinders, and buffers.

Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.

Free of abrasives and corrosives commonly found in other metal polish, this polish won’t damage or degrade aluminum surfaces.

Remove oxidation, discoloration, and heat stains from most metals without causing pitting or other surface damage.

Often used on machines, equipment, and vehicles, this three-part system makes faded painted metal surfaces look like new.

Designed for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged.

Remove dirt and scratches from fiberglass surfaces while leaving a bright, protective coating that lasts for months.

Clean and restore shine to stainless steel surfaces. These cleaners leave a finish that resists dirt, oil, and water spots.

Restore and maintain the surface layer on stainless steel that protects it from corrosion. Also known as passivating fluids.

Remove dirt, oils, and ink from rubber to restore a smooth, clean surface.

Remove scale and mineral deposits without damaging aluminum, brass, and other soft metals commonly found in pumps and heat exchangers.

In addition to cleaning steam and hot water boilers, these conditioners control foam and pH levels to improve boiler efficiency and reduce energy costs.

Loosely woven from 100% purified cotton, this silicone-free cloth is low linting and won't scratch.

The two halves of this attachment have spikes to sandwich the pad and keep it from slipping off center.

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.

This synthetic felt is an economical alternative to wool felt.

Use for lining, cleaning, straining, and polishing.