The curved blades lock into place with a quarter turn. These connectors won’t detach when bumped or pulled, so they’re often used in high-vibration applications, such as on assembly lines or with heavy machinery.

Protect against washdowns and high vibration that could disconnect cords, typical on assembly lines and heavy machinery. To maintain their washdown rating during use, attach these cords to washdown-rated connectors (not included), which have multi-ring seals to keep water out. The thick rubber jacket on these cords resists water, chemicals, weather, and abrasion. The attached covers protect unused sockets from debris, moisture, corrosion, and physical damage.

Combine the vibration resistance of a turn-lock design with the security of a screw-together locking ring. These connectors are often used in oil drilling and mining operations. IP and NEMA rated, they withstand high-pressure, high-temperature washdowns when mated.

When mated, connectors are protected against corrosion and washdowns. All have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. A quarter turn locks them in place to remain secure in high-vibration applications and prevent accidental disconnection.

Plugs mate with female receptacles and sockets with an attached cover. Male receptacles mate with sockets without an attached cover.

Resist corrosion in high-vibration environments. Stainless steel hardware and nickel-plated blades or slots protect connectors from corroding. A quarter turn locks them in place to prevent accidental disconnection due to vibration.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). These connectors have a ground terminal that is insulated from the mounting strap so you can run an isolated ground wire through the conduit. Connect a plug to these receptacles with a quarter turn to remain secure in high-vibration applications and prevent accidental disconnection.