Stud-Driven Rectangular Hole Punches for Power/Control Connectors
Create holes for installing heavy duty industrial connectors. Also known as chassis and panel punches, they cut through sheet metal and have an automatic centering design for accurate alignment. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly. Drill pilot holes slightly larger than the size of the stud. These punches can only be used with a hydraulic driver and do not require a stud adapter.
For Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| For No. of Poles | For Connection Type | Lg. | Wd. | For Max. Steel Thick. | Material | Includes | Each | |
For Use On Aluminum, Brass, Copper, Steel | ||||||||
| 6 | Pin | 2.05" | 1.42" | 1/16" | Steel | Punch, Die, Stud, Nut, Carrying Case | 0000000 | 0000000 |
| 10 | Pin | 2.56" | 1.42" | 1/16" | Steel | Punch, Die, Stud, Nut, Carrying Case | 0000000 | 000000 |
| 16 | Pin | 3.39" | 1.42" | 1/16" | Steel | Punch, Die, Stud, Nut, Carrying Case | 0000000 | 000000 |
| 24 | Pin | 4.41" | 1.42" | 1/16" | Steel | Punch, Die, Stud, Nut, Carrying Case | 0000000 | 00000000 |
Stud-Driven Rectangular Hole Punches
These punches make openings for a variety of panel switches and connectors. Also known as chassis and panel punches, they cut through sheet metal and have an automatic centering design for accurate alignment. Drill pilot holes slightly larger than the size of the stud. All punches can be used with a manual wrench or hydraulic driver, but require a stud adapter (sold separately) when used with a hydraulic driver.
Hole Punches | ||||||||
|---|---|---|---|---|---|---|---|---|
For Hole | Hydraulic Driver Stud Adapters | |||||||
| Lg. | Wd. | For Max. Steel Thick. | Material | Includes | Each | Each | ||
For Use On Aluminum, Brass, Copper, Steel | ||||||||
| 0.748" | 0.67" | 1/16" | Steel | Punch, Die, Stud, Nut | 00000000 | 0000000 | 00000000 | 000000 |
| 1.016" | 0.858" | 1/16" | Steel | Punch, Die, Stud, Nut | 00000000 | 000000 | 00000000 | 00000 |
| 1.181" | 0.866" | 1/16" | Steel | Punch, Die, Stud, Nut | 00000000 | 000000 | 00000000 | 00000 |
| 1.38" | 1.25" | 1/16" | Steel | Punch, Die, Stud, Nut | 00000000 | 000000 | 00000000 | 00000 |
Hydraulic Driver-Operated Stud-Driven DIN-Size Hole Punches
Cut DIN-sized openings for rectangular- and square-shaped instruments. These punches require a driver ram and are for use with a hydraulic pump (sold separately). Drill pilot holes slightly larger than the size of the stud.
Hole Punches | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole | Driver Rams | Hydraulic Hand Pumps | |||||||||
| For DIN Size | Lg. | Wd. | For Max. Steel Thick. | Material | Includes | Each | Each | Each | |||
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Stainless Steel, Steel | |||||||||||
Rectangular | |||||||||||
| 1/8 | 3.63" | 1.78" | 7/64" | Steel | Punch, Die, 4 Studs | 00000000 | 0000000 | 00000000 | 0000000 | 00000000 | 0000000 |
Square | |||||||||||
| 1/4 | 3.63" | 3.63" | 7/64" | Steel | Punch, Die, 4 Studs | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
Manual Wrench-Operated Stud-Driven DIN-Size Hole Punches
Turn the studs with a wrench to cut DIN-sized openings for rectangular- and square-shaped instruments. These punches require a puller adapter (sold separately) and can also be used with a hydraulic driver. Drill pilot holes slightly larger than the size of the stud.
Hole Punches | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Hole | Puller Adapters | ||||||||
| For DIN Size | Lg. | Wd. | For Max. Steel Thick. | Material | Includes | Each | Each | ||
For Use On Aluminum, Brass, Copper, Fiberglass, Plastic, Stainless Steel, Steel | |||||||||
Rectangular | |||||||||
| 1/32 | 1.78" | 0.88" | 1/16" | Steel | Punch, Die, 4 Studs | 00000000 | 0000000 | 00000000 | 0000000 |
Square | |||||||||
| 1/16 | 1.78" | 1.78" | 1/16" | Steel | Punch, Die, 4 Studs | 00000000 | 000000 | 00000000 | 000000 |
Stud-Driven Keyway Punches
Also known as chassis punches, these tools cut through sheet metal to make holes for installing panel cutout switches. They have a centering design for accurate alignment. Drill pilot holes slightly larger than the size of the stud. All punches can be used with a hydraulic driver.