Regulators for Sulfur Hexafluoride

Filter by

CGA Number

For Use With

Thread Direction

Fitting Type

Connects To

Gender

System of Measurement

Maximum Pressure @ Temperature

Thread Type

Tighten With

Pipe Size

Length

Material

Thread Size

Shape

DFARS Compliance

Fitting Connection

REACH Compliance

Maximum Temperature

Minimum Temperature

RoHS Compliance

Finish

DIN Gas Connection Number

Forward

How can we improve?

20 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

Nuts for High-Pressure Nipples for Compressed Gas

Slide a high-pressure hose nipple for compressed gas into one of these nuts to connect a pipe to the inlet of a pressure regulator. They are also known as CGA (Compressed Gas Association) nuts and inlet nuts.

Brass nuts have good corrosion resistance and are softer than 316 stainless steel nuts, so they're easier to thread together. Aluminum-plated brass nuts have better corrosion and wear resistance than unplated brass. Chrome-plated brass nuts have comparable corrosion and wear resistance to aluminum-plated brass nuts, and have a bright, shiny appearance.

Nuts with a plastic grip can be tightened by hand instead of with a wrench.

Nuts with left-hand threads are identified with a notch.

Note: Nuts have a CGA, BS, or DIN number that corresponds to a specific type of gas. Choose a nut with the same number as your tank and other system components.

For technical drawings and 3-D models, click on a part number.

Female

Female Nut

Maximum Pressure: See table
Maximum Temperature: 120° F, except DIN 477 No. 9: 250° F

Aluminum-Plated Brass
Number	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
DIN 477 No. 6	W 21.8	Metric	Right Hand	3,000 psi @ 72° F	Argon, Carbon Dioxide, Cyclobutane, Dichlorotetrafluoroethane, Helium, Krypton, Sulfur Hexafluoride, Trifluoroethane, Xenon	000000000	000000

Male

Male Nut

Maximum Pressure: See table
Maximum Temperature: 120° F, except DIN 477 No. 12: 250° F

Brass
Number	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
CGA 500	0.880"-14	NGO	Right Hand	3,000 psi @ 72° F	Medical Gas Mixtures	000000000	000000
CGA 510	0.880"-14	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	0000
CGA 580	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	0000
CGA 590	0.960"-14	NGO	Left Hand	3,000 psi @ 72° F	Sulfur Hexafluoride	000000000	0000
Brass with Plastic Grip
CGA 510	0.880"-14	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	00000
CGA 580	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
Chrome-Plated Brass
CGA 510	0.880"-14	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	00000
CGA 580	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
CGA 590	0.960"-14	NGO	Left Hand	3,000 psi @ 72° F	Sulfur Hexafluoride	000000000	00000

High-Pressure Nipples for Compressed Gas

Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut (sold separately) so you can make a threaded connection.

Brass nipples have good corrosion resistance and are softer than 316 stainless steel nipples, so they're easier to thread together. Chrome-plated brass nipples have better corrosion and wear resistance than unplated brass nipples and have a bright, shiny appearance.

Nipples that tighten by hand should be paired with a nut with a plastic grip.

For technical drawings and 3-D models, click on a part number.

Nipples, Tank × Male Regulator

Maximum Pressure: See table
Maximum Temperature: 120° F

	Regulator Connection
For Number (Max. Pressure)	Pipe Size	Thread Type	Lg.	For Use With		Each
Brass—Tighten With Wrench
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F)	1/4	NPT	2 1/2"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	000000000	00000
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F)	1/4	NPT	3"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	000000000	0000
CGA 500, 580, 590 (3,000 psi @ 72° F); CGA 510 (500 psi @ 72° F)	1/4	NPT	3 1/2"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Medical Gas Mixtures, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	000000000	0000
DIN 477 No. 6 (4,350 psi @ 72° F)	1/4	NPT	3 1/2"	Argon, Carbon Dioxide, Cyclobutane, Dichlorotetrafluoroethane, Helium, Krypton, Sulfur Hexafluoride, Trifluoroethane, Xenon	000000000	00000
Brass—Tighten By Hand
CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F)	1/4	NPT	3 33/64"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	000000000	00000
Chrome-Plated Brass—Tighten With Wrench
CGA 510 (500 psi @ 72° F); CGA 580, 590 (3,000 psi @ 72° F)	1/4	NPT	3 1/2"	Acetylene, Argon, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Helium, Isobutane, Krypton, Methane, Methyl Chloride, Natural Gas, Neon, Nitrogen, Propane, Propylene, Sulfur Hexafluoride, Vinyl Chloride, Vinyl Bromide, Xenon	000000000	00000

Nuts

Female Nut

Male Nut

Maximum Pressure: See table
Maximum Temperature: 120° F

Brass
Number	Gender	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
CGA 500	Male	0.880"-14	NGO	Right Hand	3,000 psi @ 72° F	Medical Gas Mixtures	000000000	000000
CGA 510	Male	0.880"-14	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	0000
CGA 580	Male	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	0000
CGA 590	Male	0.960"-14	NGO	Left Hand	3,000 psi @ 72° F	Sulfur Hexafluoride	000000000	0000
Brass with Plastic Grip
CGA 510	Male	0.880"-14	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	00000
CGA 580	Male	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
Aluminum-Plated Brass
DIN 477 No. 6	Female	W 21.8	Metric	Right Hand	3,000 psi @ 72° F	Argon, Carbon Dioxide, Cyclobutane, Dichlorotetrafluoroethane, Helium, Krypton, Sulfur Hexafluoride, Trifluoroethane, Xenon	000000000	00000
Chrome-Plated Brass
CGA 510	Male	0.880"-14	NGO	Left Hand	500 psi @ 72° F	Acetylene, Butane, Cyclopropane, Dimethyl Ether, Ethylene Oxide, Isobutane, Methane, Methyl Chloride, Natural Gas, Propane, Propylene, Vinyl Bromide, Vinyl Chloride	000000000	00000
CGA 580	Male	0.960"-14	NGO	Right Hand	3,000 psi @ 72° F	Argon, Helium, Krypton, Neon, Nitrogen, Xenon	000000000	00000
CGA 590	Male	0.960"-14	NGO	Left Hand	3,000 psi @ 72° F	Sulfur Hexafluoride	000000000	00000

High-Pressure Threaded Fittings for Compressed Gas

Designed to handle high-pressure welding applications, these fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.

Fittings with left-hand threads are identified with a notch in the nut.

Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.

For technical drawings and 3-D models, click on a part number.

Male Tank × Male Regulator

Maximum Pressure: See table
Maximum Temperature: 120° F

CGA Number		Tank Connection			Regulator Connection
Tank	Regulator	Thread Size	Thread Type	Thread Direction	Thread Size	Thread Type	Thread Direction	Max. Pressure	For Use With		Each
Brass
590	346	0.960"-14	NGO	Left Hand	0.830"-14	NGO	Right Hand	3,000 psi @ 72° F	Air, Sulfur Hexafluoride	0000000	000000

Male Tank × Female Regulator

Maximum Pressure: 3,000 psi @ 72° F
Maximum Temperature: 120° F

CGA Number		Tank Connection			Regulator Connection
Tank	Regulator	Thread Size	Thread Type	Thread Direction	Thread Size	Thread Type	Thread Direction	For Use With		Each
Brass
296	590	0.803"-14	UNS	Right Hand	0.960"-14	NGO	Left Hand	Oxygen Mixtures, Sulfur Hexafluoride	0000000	000000
580	590	0.960"-14	NGO	Right Hand	0.960"-14	NGO	Left Hand	Argon, Helium, Krypton, Neon, Nitrogen, Sulfur Hexafluoride, Xenon	0000000	00000
590	580	0.960"-14	NGO	Left Hand	0.960"-14	NGO	Right Hand	Argon, Helium, Krypton, Neon, Nitrogen, Sulfur Hexafluoride, Xenon	0000000	00000