About Installing Blind Rivets
More
18-8 Stainless Steel Large-Diameter Domed Head Blind Rivets
18-8 stainless steel has good corrosion resistance and may be mildly magnetic. These rivets have a 50% larger head diameter than standard domed head blind rivets, distributing pressure where the head meets the material surface. Use for covering irregular holes as well as extra holding power when fastening soft, thin materials to a rigid backing. They join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs.  | Specifications Met | Pkg. Qty. | Pkg. | |
1/8" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.063"-0.125" | 0.25" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 000000 |
| 0.126"-0.187" | 0.313" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.188"-0.25" | 0.375" | 0.129"-0.133" | No. 30 | 0.39" | 0.046" | 420 | 530 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.39" | 0.065" | 420 | 530 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.375" | 0.065" | 420 | 530 | IFI 114 Standards | 25 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.02"-0.125" | 0.3" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.187" | 0.362" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.251"-0.375" | 0.55" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.376"-0.5" | 0.675" | 0.16"-0.164" | No. 20 | 0.468" | 0.075" | 650 | 820 | IFI 114 Standards | 50 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.02"-0.125" | 0.325" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.65" | 0.075" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 0000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 25 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.625" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.65" | 0.092" | 950 | 1,200 | IFI 114 Standards | 10 | 000000000 | 0000 |