About Installing Blind Rivets
More
Zinc-Plated Steel Domed Head Blind Rivets
Installed
The zinc-plated finish provides mild corrosion resistance. These rivets join material when you only have access to one side. The low-profile domed head creates a finished appearance.
The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.
A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.
For technical drawings and 3-D models, click on a part number.
Inch
| For Material Thick. | Lg. | For Hole Size | For Drill Bit Size | Head Dia. | Head Ht. | Shear Strength, lbs. | Tensile Strength, lbs.  | Specifications Met | Pkg. Qty. | Pkg. | |
3/32" Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.126"-0.25" | 0.375" | 0.097"-0.1" | No. 41 | 0.198" | 0.032" | 150 | 200 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.5" | 0.097"-0.1" | No. 41 | 0.188" | 0.036" | 130 | 170 | IFI 114 Standards | 50 | 000000000 | 0000 |
| 0.313"-0.375" | 0.5" | 0.097"-0.1" | No. 41 | 0.188" | 0.028" | 150 | 200 | IFI 114 Standards | 50 | 000000000 | 0000 |
1/8" Dia. | |||||||||||
| 0.032"-0.062" | 0.212" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.063"-0.125" | 0.275" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.126"-0.187" | 0.337" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.188"-0.25" | 0.4" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.251"-0.312" | 0.462" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.313"-0.375" | 0.525" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.376"-0.5" | 0.65" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.501"-0.625" | 0.775" | 0.129"-0.133" | No. 30 | 0.262" | 0.04" | 260 | 310 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.626"-0.75" | 0.9" | 0.129"-0.133" | No. 30 | 0.25" | 0.036" | 260 | 310 | IFI 114 Standards | 50 | 000000000 | 0000 |
| 0.751"-0.875" | 1.03" | 0.129"-0.133" | No. 30 | 0.25" | 0.04" | 260 | 310 | IFI 114 Standards | 25 | 000000000 | 0000 |
5/32" Dia. | |||||||||||
| 0.063"-0.125" | 0.3" | 0.16"-0.164" | No. 20 | 0.328" | 0.05" | 410 | 570 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.126"-0.187" | 0.362" | 0.16"-0.164" | No. 20 | 0.328" | 0.05" | 410 | 570 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.188"-0.25" | 0.425" | 0.16"-0.164" | No. 20 | 0.328" | 0.05" | 410 | 570 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.251"-0.375" | 0.55" | 0.16"-0.164" | No. 20 | 0.328" | 0.05" | 410 | 570 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.376"-0.5" | 0.675" | 0.16"-0.164" | No. 20 | 0.328" | 0.05" | 410 | 570 | IFI 114 Standards | 250 | 000000000 | 00000 |
3/16" Dia. | |||||||||||
| 0.063"-0.125" | 0.325" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 250 | 000000000 | 00000 |
| 0.126"-0.25" | 0.45" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.251"-0.375" | 0.575" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 0000 |
| 0.376"-0.5" | 0.7" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.501"-0.625" | 0.825" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.626"-0.75" | 0.95" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.751"-0.875" | 1.075" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.876"-1" | 1.2" | 0.192"-0.196" | No. 11 | 0.394" | 0.063" | 590 | 810 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.985"-1.181" | 1.417" | 0.201"-0.204" | No. 7 | 0.375" | 0.063" | 590 | 810 | __ | 10 | 000000000 | 00000 |
| 1.001"-1.125" | 1.325" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 540 | 680 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 1.126"-1.25" | 1.45" | 0.192"-0.196" | No. 11 | 0.375" | 0.06" | 540 | 680 | IFI 114 Standards | 10 | 000000000 | 0000 |
| 1.182"-1.338" | 1.614" | 0.201"-0.204" | No. 7 | 0.375" | 0.063" | 590 | 810 | __ | 10 | 000000000 | 00000 |
| 1.378"-1.535" | 1.811" | 0.201"-0.204" | No. 7 | 0.375" | 0.063" | 590 | 810 | __ | 10 | 000000000 | 00000 |
| 1.575"-1.732" | 2.008" | 0.201"-0.204" | No. 7 | 0.375" | 0.063" | 590 | 810 | __ | 10 | 000000000 | 00000 |
1/4" Dia. | |||||||||||
| 0.063"-0.25" | 0.5" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,240 | 1,500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.251"-0.375" | 0.625" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,240 | 1,500 | IFI 114 Standards | 100 | 000000000 | 00000 |
| 0.376"-0.5" | 0.75" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,240 | 1,500 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.501"-0.625" | 0.875" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,240 | 1,500 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.626"-0.75" | 1" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,240 | 1,500 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.751"-0.875" | 1.125" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,000 | 1,240 | IFI 114 Standards | 50 | 000000000 | 00000 |
| 0.876"-1" | 1.25" | 0.257"-0.261" | F | 0.525" | 0.08" | 1,240 | 1,500 | IFI 114 Standards | 50 | 000000000 | 00000 |
Metric
| For Material Thick., mm | Lg., mm | For Hole Size, mm | For Drill Bit Size, mm | Head Dia., mm | Head Ht., mm | Shear Strength, lbs. | Tensile Strength, lbs. | Specifications Met | Pkg. Qty. | Pkg. | |
3mm Dia. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3-5 | 8 | 3.1-3.2 | 3 | 6.5 | 1 | 220 | 290 | DIN 7337, ISO 15979 | 25 | 000000000 | 00000 |
4mm Dia. | |||||||||||
| 2.5-4.5 | 8 | 4.1-4.2 | 4 | 8 | 1.2 | 440 | 560 | DIN 7337, ISO 15979 | 25 | 000000000 | 0000 |
| 4.5-6.5 | 10 | 4.1-4.2 | 4 | 8 | 1.2 | 440 | 560 | DIN 7337, ISO 15979 | 25 | 000000000 | 0000 |