50 5/8" Wide Rollers | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

5,688 Products

Roller Conveyors

1.9" Diameter Conveyor Rollers

Rollers have a standard 1.9" diameter to fit most roller conveyors.

Made-to-Order 1.9" Diameter Conveyor Rollers

Choose the width you need from 6" to 60" in 1/16" increments.

Large-Diameter Conveyor Rollers

Rollers have diameters between 2" and 3 1/2".

Made-to-Order Large-Diameter Conveyor Rollers

Choose the width you need from 6" to 60" in 1/16" increments.

Small-Diameter Conveyor Rollers

These rollers have diameters 1 3/8" and below.

1.9" Diameter Corrosion-Resistant Conveyor Rollers

Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

Made-to-Order 1.9" Diameter
Corrosion-Resistant Conveyor Rollers

Choose the width you need from 6" to 60" in 1/16" increments.

Small-Diameter Corrosion-Resistant Conveyor Rollers

These rollers have diameters 1 3/4" and below.

Large-Diameter Corrosion-Resistant Conveyor Rollers

All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.

Made-to-Order Large-Diameter
Corrosion-Resistant Conveyor Rollers

Choose the width you need from 6" to 60" in 1/16" increments.

Small-Diameter Abrasion-Resistant Conveyor Rollers

These rollers have 0.78" diameters.

1.9" Diameter Abrasion-Resistant Conveyor Rollers

Rollers have a standard 1.9" diameter to fit most roller conveyors.

1.9" Diameter Dent-Resistant Conveyor Rollers

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

1.9" Diameter Frame-Saving Conveyor Rollers

Rubber-covered axles eliminate metal-to-metal contact to prevent frame wear and reduce noise.

1.9" Diameter Quiet-Rolling Conveyor Rollers

Rollers have maintenance-free, precision bearings to reduce conveyor noise.

1.9" Diameter Motorized Conveyor Rollers

Rollers have a standard 1.9" diameter to fit most roller conveyors.

One-Way Conveyor Rollers for Inclines

Rollers move in one direction so they won't roll back when idle, keeping packages in place.

Tapered Conveyor Rollers for Curves

Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.

Round-Groove Conveyor Rollers

" Rollers are grooved to accommodate round belts on line-shaft conveyors."

Made-to-Order Round-Groove Conveyor Rollers

We'll get the between frame width and groove spacing you need in 1/16" increments.

Motorized Round-Groove Conveyor Rollers

Connect to other rollers with two grooves to power a gravity conveyor or build a custom powered conveyor.

Tapered Round-Groove Conveyor Rollers

Rollers are tapered for use on curved conveyor sections.

Sprocketed Conveyor Rollers

Replace rollers on a chain-driven conveyor.

Made-to-Order Sprocketed Conveyor Rollers

We'll get the between frame width and sprocket spacing you need in 1/16" increments.

1.9" Diameter V-Groove Conveyor Rollers

Rollers have a standard 1.9" diameter to fit most roller conveyors.

V-Belts for V-Groove Conveyor Rollers

Replace worn and broken V-belts on conveyor rollers.

High-Capacity Roller Conveyors

Rollers have a standard 1.9" diameter to fit most roller conveyors.

High-Capacity Large-Diameter Roller Conveyors

These rollers have 2 1/2" diameters.

Roller Conveyors

Easily move light- to medium-weight objects with flat or uneven bottoms.

Bench-Top Roller Conveyors

These conveyors are designed to rest on a work surface instead of a stand.

Motorized Roller Conveyors

Also known as line-shaft conveyors, these are driven by a drive shaft and round belts.

Stainless Steel Roller Conveyors

Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.

High-Capacity Stainless Steel Roller Conveyors

For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel making them suitable for washdown applications.

Sleeve Bearings for Conveyor Rollers

Sleeve bearings ride directly on the axle and have no moving parts to wear out.

Ball Bearings for Conveyor Rollers

Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.

Ball Bearings with Axle for Conveyor Rollers

Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe create a roller. All have a hex-shaped axle.

Spools for Line-Shaft Conveyors

Replace the spools that hold round belts in place on line-shaft conveyors.

Clips for Line-Shaft Conveyor Spools

Clips clamp onto the shaft to keep spools from slipping, preventing wear on the belt.

Connectors for Line-Shaft Conveyor Spools

Lock multiple spools together to increase drive power.

Conveyor Roller Mounting Brackets

Use in pairs to support a conveyor roller or package stop.

Frame-Repair Brackets for Conveyor Rollers

Mount to a conveyor frame to recondition a worn hex axle hole or to convert a round axle hole to a hex axle hole.

Protective Covers for Conveyor Rollers

Reduce noise, absorb impact, and extend roller life.

Loose-Fitting Protective Covers for Conveyor Rollers

Covers fit loosely over the roller to allow packages to accumulate. Rollers can continue spinning inside the cover without causing damage to packages.

Speed Reducers for Roller Conveyors

Also known as pallet brakes, these mount underneath rollers on a gravity conveyor and create friction on the rollers to control the conveyor's speed.

Package Stops for Roller Conveyors

Add a package stop on a conveyor to control product flow and allow for accumulation.

Ball Transfers

Stud-Mount Ball Transfers

Install in a threaded hole or use a nut to secure.

Heavy Duty Stud-Mount Ball Transfers

These ball transfers have capacities up to 2,200 lbs.

Washdown Stud-Mount Ball Transfers

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

Clean Room Stud-Mount Ball Transfers

Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination.

Recessed Flange-Mount Ball Transfers

Transfers recess into the mounting surface for a low profile.

Heavy Duty Recessed Flange-Mount Ball Transfers

These heavy duty ball transfers recess into the mounting surface for a low profile.

Washdown Recessed Flange-Mount Ball Transfers

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

Shock-Absorbing Recessed
Flange-Mount Ball Transfers

The ball in these transfers is spring-loaded to absorb impact.

Flange-Mount Ball Transfers

The flange has mounting holes for fastening.

Heavy Duty Flange-Mount Ball Transfers

These ball transfers have capacities up to 2,400 lbs.

Washdown Flange-Mount Ball Transfers

Ball transfers have a double-sealed ball to keep out dirt and debris. Side vents expel contaminants.

Shock-Absorbing Flange-Mount Ball Transfers

A thick rubber cushion underneath these ball transfers absorbs impact and reduces vibration.

Press-Fit Ball Transfers

Drop-in design makes for easy installation.

Heavy Duty Press-Fit Ball Transfers

These ball transfers have capacities up to 2,200 lbs.

Shock-Absorbing Press-Fit Ball Transfers

The ball in these transfers is spring-loaded to absorb impact.

Ball Transfers for Delicate Surfaces

A large-diameter rubber ball handles delicate or polished surfaces. The stem spins and the ball rotates around the stem.

Pop-Up Ball Transfers and Stops

These ball transfers and stops rise when you supply air and retract into the housing when air supply ceases.

Ball Transfer Plates

Low-Profile Ball Transfer Plates

Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.

Ball Transfer Plates

These plates are designed to rest on a flat surface and are good for rotating and positioning heavy workpieces.

Covers for Ball Transfer Plates

Covers create a smooth surface so small and oddly shaped items won't get caught between ball transfers.

Create-Your-Own Ball Transfer Plates

Snap these ball transfers together like jigsaw pieces to create a custom ball transfer plate, or use them unconnected to create your own pattern for rotating and positioning material. They have magnets embedded in the frame, so you can mount them on any flat magnetic metal surface and rearrange them as your operations change.

Wheel Transfers

Mount these wheel transfers with the wheel up to transfer heavy objects.

Ball Transfer Extensions

Add length to a ball transfer conveyor with these 6" long extensions or integrate them into a roller conveyor for multidirectional movement.

Ball Transfer Conveyors

Use these 2- to 3-foot conveyor sections alone or add to a roller conveyor to rotate and position material along a conveying line.

Skate Wheel Conveyors

Skate Wheels

Replace damaged wheels or use multiple wheels to build a custom conveyor.

Flanged Skate Wheels

A flange on these wheels separates material while guiding it down the line.

Press-Fit Skate Wheels

Create a low-profile conveying surface.

Multidirectional Skate Wheels

These wheels have rollers that rotate around the wheel core to allow movement in any direction.

Flexible Skate Wheel Conveyors

An accordion-style frame lets you quickly curve, expand, and retract these conveyors. They have skate wheels for flat-bottom objects in assembly lines or packaging and shipping applications.

Flexible Skate Wheel Conveyors with Side Rails

Side rails keep packages from sliding off.

Skate Wheel Conveyors

Skate wheel conveyors are for light duty loading and unloading of flat-bottom objects.

Belt Conveyors

Rubber-Coated Pulleys for Conveyor Belts

A rubber coating, also known as lagging, increases friction for a better grip on the belt.

Steel Pulleys for Conveyor Belts

Replace worn or damaged pulleys or create new belt conveyors.

Stainless Steel Pulleys for Conveyor Belts

The corrosion-resistant stainless steel construction makes these pulleys suitable for washdown applications.

Idler Wheels for Conveyor Chain Belts

Idler wheels keep the belt moving and prevent sagging.

Sprockets for Conveyor Chain Belts

Sprockets transmit power to drive belting.

Sprockets for Food Industry
Cut-Resistant Conveyor Belting

Choose these sprockets when you need to expand your Ammeraal Beltech MPB conveyor line or replace its worn sprockets.

Retainer-Mount Coating for Conveyor Pulleys

Slide these coating strips into metal retainers that you attach to your pulley—they add friction that helps conveyor belts stay on pulleys and are replaceable when they’re worn.

Flow Rails

Use rails to convey packages and pallets in flow racks and confined spaces.

Build-Your-Own Flow Rails

Configure wheels where you need them on these economical rails that you can cut to length.

Heavy Duty Flow Rails

All-steel construction and tightly spaced wheels with double ball bearings gives these rails the strength needed to handle heavy loads.

Flanged-Wheel Flow Rails

The flange on the wheels separates and guides packages as they flow down the rails.

Multidirectional Flow Rails

Rotate materials in any direction on these flow rails.

Material Support Stands

Roller-Top V-Style Support Stands

Rollers support and help guide material into machinery.

Tabletop Large-Diameter Support Stands

Place stands on a work surface to position pipe while machining.

Large-Diameter V-Style Support Stands

Arms are long and at a wide angle to support pipe from 4" to 36" in diameter.

Build-Your-Own Support Stands

Build-Your-Own Tripod-Style Support Stands

Roller-Top Support Stands

Rollers support and help guide material into machinery.

Ball-Transfer-Top Support Stands

Ball transfers allow movement in any direction so you can turn material without lifting it.

Overhead Trolley Conveyors

Trolleys for Overhead
Enclosed-Track Manual Conveyors

Push to move material along the conveyor.

Trolley Chain for Overhead
Enclosed-Track Powered Conveyors

Carry loads along a track with this series of smooth-rolling alternating vertical and horizontal wheels.

Carriers for Overhead
Enclosed-Track Powered Conveyors

Carriers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes.

Track for Overhead Enclosed-Track Conveyors

Track provides the runway for trolleys, carriers, and chain in manual and powered systems.

Brackets for Overhead Enclosed-Track Conveyors

Use brackets to hang and join sections of enclosed track.

Trolleys for Manual Overhead Beam Conveyors

Push these trolleys to move material along the conveyor.

Hooks for Powered Overhead Beam Conveyors

Hooks allow items to rotate 90° while suspended.

Trolleys for Powered Overhead Beam Conveyors

Use with conveying chain to automatically move these trolleys along the beam.

Track for Overhead Beam Conveyors

Track provides the runway for trolleys in manual and powered systems.

Chain for Powered Overhead Beam Conveyors

Chain connects trolleys and guides movement along the track. It can be assembled and disassembled without tools, yet its design makes it difficult to disconnect while in use.

Cable Rollers

Easily move bulky cable and hose, even over edges, while keeping it off the ground.

Drive Rollers

Tight-Tolerance Drive Rollers

The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact.

Drive Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Abrasion-Resistant Drive Rollers

These urethane rollers are nonmarring and wear resistant.

Slim-Tread Drive Rollers

A narrow O-ring tread provides both a sure grip and a delicate touch, making these rollers good for light duty tasks such as those involving paper and tape.

Abrasion-Resistant Self-Cleaning Drive Rollers

These urethane rollers are nonmarring and wear resistant.

Self-Cleaning Drive Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Flex-Grip Drive Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Abrasion-Resistant Flex-Grip Drive Rollers

These urethane rollers are wear and chemical resistant. They’re also nonmarring.

Oil-Resistant Flex-Grip Drive Rollers

A good choice for oily environments, these Buna-N rollers are also abrasion resistant and nonmarring.

Abrasion-Resistant Rollers

These urethane rollers are nonmarring and wear resistant.

Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Abrasion-Resistant Keyed Drive Rollers

These urethane rollers are wear and chemical resistant. They’re also nonmarring.

Keyed Drive Rollers

Use these SBR rubber rollers with a keyed shaft to prevent slippage in high-torque applications.

Abrasion-Resistant Low-Profile Drive Rollers

The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots.

Press-Fit Low-Profile Drive Rollers

Install these rollers without the need for set screws or keyways.

Idler Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Abrasion-Resistant Idler Rollers

These urethane rollers are nonmarring and wear resistant.

No-Stick Idler Rollers

A slippery UHMW polyethylene surface means these rollers won't stick to adjacent parts. Rollers are also highly corrosion resistant.

Abrasion-Resistant Threaded Idler Rollers

These polyurethane rollers are nonmarring and wear resistant.

Threaded Idler Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Abrasion-Resistant One-Way-Locking
Threaded Idler/Drive Rollers

These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene rubber, they are oil, flame, gasoline, and weather resistant.

One-Way-Locking Threaded Idler/Drive Rollers

These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene rubber, they are oil, flame, gasoline, and weather resistant.

Abrasion-Resistant Self-Cleaning Threaded Idler Rollers

These urethane rollers are nonmarring and wear resistant.

Self-Cleaning Threaded Idler Rollers

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Track Rollers

Threaded Track Rollers

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

High-Load Threaded Track Rollers

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

Maintenance-Free Threaded Track Rollers

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places.

Ultra-Quiet Threaded Track Rollers

The soft rubber or plastic surface on these rollers creates less noise than the metal surfaces found on other track rollers.

Threaded Track Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

Thrust-Load-Rated Threaded Track Rollers

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Extreme-Temperature Threaded Track Rollers

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.

Thrust-Load-Rated Corrosion-Resistant
Threaded Track Rollers

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

Maintenance-Free Ultra-Corrosion-Resistant
Threaded Track Rollers

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

Corrosion-Resistant Threaded Track Rollers

These threaded track rollers are made of materials that prevent corrosion in wet environments.

Shaft-Mount Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

High-Load Shaft-Mount Track Rollers

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.

Corrosion-Resistant Shaft-Mount Track Rollers

Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.

Thrust-Load-Rated Shaft-Mount Track Rollers

These rollers are rated to handle radial and thrust (top and side) loads simultaneously.

High-Speed Shaft-Mount Track Rollers

The outer ring is built to handle higher speeds than standard shaft-mount track rollers.

V-Groove Track Rollers

Shaft-Mount V-Groove Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Threaded V-Groove Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Threaded V-Groove Track
Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

Sanitary Shaft-Mount V-Groove Track Rollers

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Sanitary Threaded V-Groove Track Rollers

Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments.

Angle Rails for V-Groove Track Rollers

Use these rails with any track rollers that have a 90° V-groove.

Flanged Track Rollers

Flanged Threaded Track Rollers

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Flanged Shaft-Mount Track Rollers

Shaft-mount track rollers have more mounting flexibility than threaded track rollers.

Double-Flanged Track Rollers

A dual-flange design provides guidance on both sides and helps these rollers stay on track.

Door Track and Rollers

Track Rollers

Use these rollers as replacements on an existing door hanger or as the starting point for a customized hanger.

Overhead Door Rollers

Keep garage doors and other overhead doors rolling smoothly.

Roller Track for Doors

Combine track, mounting brackets, and hangers to create a system for hanging doors.

Roller Track Sets for Doors

These complete sets contain everything you need to create a system for hanging doors.

Low-Profile Roller Track for Doors

Narrow track allows you to hang doors in tight spaces.

Dust-Resistant Roller Track for Doors

Round track eliminates edges where dust and debris can accumulate.

Curved Roller Track for Doors,
Curtains, and Strip Doors

Curved track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors.

I-Beam Roller Track Sets for Doors

These complete sets contain everything you need to create a system for hanging doors.

Corrosion-Resistant I-Beam Roller
Track for Doors and Curtains

Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel.

Roller Track Sets for Bypassing Doors

These sets include everything you need to hang two doors that slide past each other.

Cabinet Drawer and Door Rollers

No need for drawer slides or roller track—add rollers to wood cabinet drawers and doors for smooth operation.

Drawer Slides

These slides fully extend for convenient access to the back of drawers.

Miniature Drawer Slides

Half the length of other drawer slides we sell, these slides install in small-parts cabinets.

Stacked Drawer Slides

The stacked design provides stability for deep and wide drawers.

Partial-Extension Drawer Slides

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

Lock-Open/Lock-Closed Drawer Slides

A lever locks the drawer in the open as well as closed position; push the lever to release the lock.

Miniature Pass-Through Drawer Slides

The size of a finger, these tiny slides open in both directions. All have ball bearings for smooth operation.

Pass-Through Drawer Slides

Open drawers from either side of a cart or cabinet—these slides let drawers pass through for two-way access to contents.

Self-Closing Drawer Slides

These slides automatically pull the drawer closed when it approaches the closed position.

Long-Life Lock-Open Drawer Slides

With fewer moving parts than other lock-open drawer slides, these collect less debris for a longer service life.

Lock-Open Drawer Slides

These slides provide full extension for convenient access to the back of your drawers.

Partial-Extension Lock-Open Drawer Slides

Slides only extend 3/4 of the closed length to reduce the chance that a heavy load will tip your cabinet.

Push-to-Open Drawer Slides

When you push on the drawer, these slides force the drawer open.

Hold-Open Drawer Slides

A stop holds the drawer open; push firmly on the drawer to close.

Base-Mount Drawer Slides

Soft-Closing Heavy Duty Base-
and Under-Mount Drawer Slides

To prevent drawers from slamming shut and support them even if they’re tall and full of heavy equipment, these steel slides have soft-closing bumpers and mount to the top and bottom of drawers.

Base-Mount Drawer Slides

When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer.

Heavy Duty Base- and Under-Mount Drawer Slides

Mounting to the tops and bottoms of drawers, these steel slides support drawers even if they’re tall and hold heavy equipment.

Hold-Closed Base-Mount Drawer Slides

A stop holds the drawer closed; pull firmly on the drawer to open.

Soft-Open Base-Mount Drawer Slides

These slides gradually slow the drawer's motion to prevent it from slamming open.

Under-the-Counter Drawer Slides

Mount these slides underneath countertops, desktops, shelves, and tables. They are often used to hold keyboard trays.

Door Guides

Use these guides to help control your door's motion and keep the bottom of the door from swinging.

Cabinet Door Track

Roller Track Sets for Bypassing Cabinet Doors

For smoother operation, these sets include upper and lower roller track for hanging lightweight cabinet doors that slide past each other.

Track Sets for Bypassing Cabinet Doors

Sets include an upper and lower track for hanging lightweight cabinet doors that slide past each other.

Casters and Wheels

Cut-to-Width Polyurethane Wheels

Make your own wheels by cutting these wheel blanks to size with a band saw. They're easy to machine so you can create V-groove and flanged wheels, as well as conveyor rollers and pulleys.

V-Groove Track Wheels

These wheels have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

Flanged Track Wheels

A flange on one or both sides of the wheel keeps your equipment running on rails and square structural tubing.

Flanged-Wheel Track Casters with Metal Wheels

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

V-Groove Wheel Track Casters
with Polyurethane Wheels

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

Corrosion-Resistant V-Groove Wheel
Track Casters with Polyurethane Wheels

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Their 304 stainless steel frame is corrosion resistant.

High-Capacity Flanged-Wheel
Track Casters with Metal Wheels

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

High-Capacity V-Groove Wheel
Track Casters with Metal Wheels

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

High-Capacity Corrosion-Resistant V-Groove
Wheel Track Casters with Metal Wheels

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. The 303 stainless steel wheels are suitable for steam-cleaning applications.

Extra-High-Capacity Flanged-Wheel
Track Casters with Metal Wheels

A flange on one or both sides of the wheel keeps your equipment running on square structural tubing and other rails.

Extra-High-Capacity V-Groove
Track Casters with Metal Wheels

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

Side-Mount Bracket Casters

Mount these casters to the side of equipment or on gates and doors. They are spring‐loaded for good shock absorption.

Track Roller Carriages and Guide Rails

Side-Mount Track Roller Carriages and Guide Rails

Mount along a wall or other vertical surface.

Corrosion-Resistant Side-Mount Track
Roller Carriages and Guide Rails

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Self-Aligning Side-Mount Track
Roller Carriages and Guide Rails

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Light Duty Side-Mount Track
Roller Carriages and Guide Rails

Use these carriages and guide rails for light loads where precise movement is not required.

Side-Mount Track Roller
Carriages for T-Slotted Framing

Combine with a T-slotted rail to add linear motion to your assembly.

Track Roller Carriages and Guide Rails

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

Light Duty Track Roller Carriages and Guide Rails

Nylon rollers provide low-friction movement for light loads and corrosive environments.

High-Temperature Track Roller
Carriages and Guide Rails

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

High-Load Track Roller Carriages and Guide Rails

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

Locking High-Load Track Roller
Carriages and Guide Rails

A handle on the side of the carriage locks the carriage in place.

Track Rollers and Guide Rails

These steel track rollers and guide rails support loads up to 300 lbs.

Light Duty Track Rollers and Guide Rails

Nylon rollers and aluminum rails make these good for light duty applications.

Corrosion-Resistant Track Rollers and Guide Rails

Made of stainless steel, these track rollers and guide rails are more corrosion resistant than steel rollers and rails.

Ball Bearing Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Ball Bearing
Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Horizontal-Mount Ball Bearing
Carriages and Guide Rails

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Maintenance-Free Ball Bearing
Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Maintenance-Free
Ball Bearing Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Clean Room Ball Bearing Carriages and Guide Rails

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

High-Cycle Ball Bearing Carriages and Guide Rails

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

Horizontal-Mount Quiet-Ride Ball
Bearing Carriages and Guide Rails

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Miniature Ball Bearing Carriages and Guide Rails

These tiny carriages and guide rails are sized for electronic and other precision applications.

High-Cycle Low-Profile Ball
Bearing Carriages and Guide Rails

Run many cycles in tight spaces before replacing or re-greasing carriages.

Extra-Wide Ball Bearing Carriages and Guide Rails

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

High-Cycle Extra-Wide Ball
Bearing Carriages and Guide Rails

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Side-Mount Ball Bearing Carriages and Guide Rails

Mount to vertical surfaces for applications where tight tolerances aren't required.

Roller Bearing Carriages and Guide Rails

Roller bearing carriages handle heavier loads than ball bearing and track roller carriages.

Telescoping Slides

Telescoping Rail Sets

Create your own positioning table or telescoping slide. Sets include four rails, two roller bearing cages, and eight end stops.

High-Load Low-Friction Telescoping Slides

With a row of crossed-roller bearings on each side of the rail, these slides have over twice the load capacity of standard low-friction slides and are better for handling shock loads.

Low-Friction Telescoping Slides

Slides have a row of ball bearings on each side of the rail.

Telescoping Slides

Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

Positioning Tables with Micrometers

Locking Two-Axis Positioning Tables with Micrometers

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Two-Axis Positioning Tables with Micrometers

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Locking Positioning Tables with Micrometer

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Positioning Tables with Micrometer

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Three-Axis Positioning Tables with Micrometers

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

High-Capacity Roller Dollies

High-Capacity Roller Track Dollies for Smooth Surfaces

Small-diameter rollers on these dollies rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

High-Capacity Roller Track
Dolly Sets for Smooth Surfaces

These sets have all of the pieces you need to move heavy equipment. Their small-diameter rollers rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

Convertible Rigid/Swivel-Top High-Capacity
Roller Track Dolly Sets for Smooth Surfaces

Use these dollies with their rigid top platform for straight-line movement, or add the included swivel platforms for controlled turning. The small-diameter rollers rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

High-Capacity Roller Dolly Sets for Smooth Surfaces

These sets have all of the pieces you need to move and turn heavy equipment.

High-Capacity Roller Dollies for Smooth Surfaces

Large diameter rollers are axle mounted and roll like wheels.

Multidirectional High-Capacity
Roller Dollies for Uneven Surfaces

Maneuver machines and heavy loads into confined spaces. These dollies have rollers that swivel independently, allowing movement in any direction.

Easy-Turn High-Capacity Roller
Dollies for Uneven Surfaces

These dollies are designed to make turning easy.

Steering High-Capacity Roller
Dollies for Uneven Surfaces

Use these dollies to move bulky loads. A handle allows for easy steering and turning.

Dollies

Light Duty Adjustable-Length Dollies

Also known as appliance dollies, use these in pairs to support loads of varying sizes.

Low-Profile Steel Dollies

Because these dollies are lower to the ground than most steel dollies you won't have far to lift a load.

Solid-Platform Steel Dollies

The solid platform on these dollies prevents small loads from falling through.

Open-Platform Steel Dollies

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

Raised Large-Platform Steel Dollies

Sized to move pallets, set these dollies to a comfortable working height while loading and unloading.

Large-Platform Steel Dollies

The platforms on these dollies are oversized to handle pallets, machinery, large containers, and other heavy equipment.

Large-Platform Aluminum Dollies

With an oversized platform and wheels designed for easy turning, these dollies can handle heavy pallet loads.

Open-Platform Aluminum Dollies

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

Food Industry Aluminum Dollies

A rustproof aluminum platform and open corners for easy drainage make these dollies a good fit for food-service applications, plus they meet NSF/ANSI standards for food equipment.

Solid-Platform Plastic Dollies

The solid platform on these dollies prevents small loads from falling through.

Open-Platform Plastic Dollies

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

Solid-Platform Wood Dollies

The solid platform on these dollies prevents small loads from falling through.

Open-Platform Wood Dollies

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

Dollies for Equipment with Legs

Put these dollies under each leg of a load for stable transport. The recessed center keeps legs from sliding off.

Lift-and-Roll Dollies

Position these dollies under a load, then depress the handle to lift it.

Tilt-and-Lift Dollies

These dollies provide the leverage you need to move file cabinets and crates. Slide one end under the edge of a load and step down on the other end to raise the load.

Easy-Stack Dollies

Store and transport these dollies in a stack up to 35 dollies high.

Easy-Turn Dollies

For maneuverability in tight spaces, these dollies have two platforms that swivel independently. Their casters are often called triple-swivel casters or zero-throw casters.

High-Capacity Air-Glide Dollies

Also known as bearing movers, air casters, and air bearings, these dollies float loads on a cushion of air. They work well on large, unevenly distributed loads.

Lifting Levers for Dollies

Also known as pry bars or Johnson bars, these provide the leverage you need to lift a large load onto a dolly.

Drum Dollies

Open-Front Easy-Steer Drum Dollies

The platform on these dollies is open in front to make loading and unloading easier.

Easy-Steer Drum Dollies

A T-style handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles.

Cross-Brace Drum Dollies

In addition to holding round drums, most of these dollies also support square cartons and crates.

Cross-Brace Drum Dollies with Support Ring

A ring around the outside of these dollies supports loads and prevents them from slipping off.

Solid Platform Drum Dollies

The solid platform on these dollies provides the best overall support.

Stable-Ride Drum Dollies

The casters on these dollies are mounted outside the platform for increased stability.

Roller Conveyors

1.9" Diameter Conveyor Rollers

Made-to-Order 1.9" Diameter Conveyor Rollers

Large-Diameter Conveyor Rollers

Made-to-Order Large-Diameter Conveyor Rollers

Small-Diameter Conveyor Rollers

1.9" Diameter Corrosion-Resistant Conveyor Rollers

Made-to-Order 1.9" DiameterCorrosion-Resistant Conveyor Rollers

Small-Diameter Corrosion-Resistant Conveyor Rollers

Large-Diameter Corrosion-Resistant Conveyor Rollers

Made-to-Order Large-DiameterCorrosion-Resistant Conveyor Rollers

Small-Diameter Abrasion-Resistant Conveyor Rollers

1.9" Diameter Abrasion-Resistant Conveyor Rollers

1.9" Diameter Dent-Resistant Conveyor Rollers

1.9" Diameter Frame-Saving Conveyor Rollers

1.9" Diameter Quiet-Rolling Conveyor Rollers

1.9" Diameter Motorized Conveyor Rollers

One-Way Conveyor Rollers for Inclines

Tapered Conveyor Rollers for Curves

Round-Groove Conveyor Rollers

Made-to-Order Round-Groove Conveyor Rollers

Motorized Round-Groove Conveyor Rollers

Tapered Round-Groove Conveyor Rollers

Sprocketed Conveyor Rollers

Made-to-Order Sprocketed Conveyor Rollers

1.9" Diameter V-Groove Conveyor Rollers

V-Belts for V-Groove Conveyor Rollers

High-Capacity Roller Conveyors

High-Capacity Large-Diameter Roller Conveyors

Roller Conveyors

Bench-Top Roller Conveyors

Motorized Roller Conveyors

Stainless Steel Roller Conveyors

High-Capacity Stainless Steel Roller Conveyors

Sleeve Bearings for Conveyor Rollers

Ball Bearings for Conveyor Rollers

Ball Bearings with Axle for Conveyor Rollers

Spools for Line-Shaft Conveyors

Clips for Line-Shaft Conveyor Spools

Connectors for Line-Shaft Conveyor Spools

Conveyor Roller Mounting Brackets

Frame-Repair Brackets for Conveyor Rollers

Protective Covers for Conveyor Rollers

Loose-Fitting Protective Covers for Conveyor Rollers

Speed Reducers for Roller Conveyors

Package Stops for Roller Conveyors

Ball Transfers

Stud-Mount Ball Transfers

Heavy Duty Stud-Mount Ball Transfers

Washdown Stud-Mount Ball Transfers

Clean Room Stud-Mount Ball Transfers

Recessed Flange-Mount Ball Transfers

Heavy Duty Recessed Flange-Mount Ball Transfers

Washdown Recessed Flange-Mount Ball Transfers

Shock-Absorbing RecessedFlange-Mount Ball Transfers

Flange-Mount Ball Transfers

Heavy Duty Flange-Mount Ball Transfers

Washdown Flange-Mount Ball Transfers

Shock-Absorbing Flange-Mount Ball Transfers

Press-Fit Ball Transfers

Heavy Duty Press-Fit Ball Transfers

Shock-Absorbing Press-Fit Ball Transfers

Ball Transfers for Delicate Surfaces

Pop-Up Ball Transfers and Stops

Ball Transfer Plates

Low-Profile Ball Transfer Plates

Ball Transfer Plates

Covers for Ball Transfer Plates

Create-Your-Own Ball Transfer Plates

Wheel Transfers

Wheel Transfers

Ball Transfer Extensions

Ball Transfer Extensions

Ball Transfer Conveyors

Ball Transfer Conveyors

Skate Wheel Conveyors

Skate Wheels

Flanged Skate Wheels

Press-Fit Skate Wheels

Multidirectional Skate Wheels

Made-to-Order 1.9" Diameter
Corrosion-Resistant Conveyor Rollers

Made-to-Order Large-Diameter
Corrosion-Resistant Conveyor Rollers

Shock-Absorbing Recessed
Flange-Mount Ball Transfers

Sprockets for Food Industry
Cut-Resistant Conveyor Belting

Trolleys for Overhead
Enclosed-Track Manual Conveyors

Trolley Chain for Overhead
Enclosed-Track Powered Conveyors

Carriers for Overhead
Enclosed-Track Powered Conveyors

Abrasion-Resistant One-Way-Locking
Threaded Idler/Drive Rollers