Add dry ingredients to dairy, food, and pharmaceutical lines using these bulk dispensers, which have a 3-A certified sanitary design.

FDA compliant for direct contact with food, these dispensers are often used to store or quickly dispense dry ingredients in food and pharmaceutical plants.

The sloped bottom of the picking bin allows parts to flow forward while the shallow-angle lip makes them easily accessible.

Generating vibration with electromagnets, these have no mechanical parts that can wear out and shorten service life.

Often attached to differential pressure gauges to measure liquid level in tanks, these manifolds have two isolation valves with a pressure-equalizing valve between them. To isolate your differential pressure gauge for maintenance or calibration, shut off flow on both sides and equalize pressure in the manifold. They are rated for at least 6,000 psi. Use with water, oil, air, and inert gas.

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Control the flow of oil to a single lubrication point.

For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced.

Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.

A sealed design prevents contamination in dirty and dusty environments.

A solenoid automatically starts and stops flow to a single lubrication point to dispense lubricant while equipment is running.

Manually adjust the flow of oil to a single lubrication point.

Use these brushes to lubricate chain, gears, and conveyors. Connect to an oil dispenser, then turn the dial to adjust flow.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.

Dispense a fixed amount of oil by pumping the handle.

Set the cycle interval as well as the dispensing duration. This pump has a maximum flow of 0.1 oz. per second.

Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.

Connect these modular pumps to a reservoir and a solenoid valve to automate the flow of oil.

A needle dispensing tip provides fine control for lubricating small parts.

These dispensers have an opening for filling without removing the nozzle.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

This gun comes filled with 2 oz. of lithium-thickened grease.

Dispense grease with the highest-pressure-rated gun we offer.

Dispense small amounts of grease with this compact gun.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

Dispense small amounts of grease with one of these compact guns.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispense from grease guns into grease fittings and bare lubrication points.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Replace the dispensing tip on your filler pump.

Spring pressure ensures a constant flow of grease.

Turn the metering pin to adjust flow rate.

Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease.

Lubricate single- and double-strand roller chain.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Dispense grease using compressed air.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

The surface of these rollers is molded to a tolerance of either ±0.003 in. or ±0.08 mm to provide more consistent surface contact.

A narrow O-ring tread provides both a sure grip and a delicate touch, making these rollers good for light duty tasks such as those involving paper and tape.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

These urethane rollers are wear and chemical resistant. They’re also nonmarring.

The mounting holes on these rollers are tapped directly through the roller’s surface so you can install them with set screws and still fit them into tight spots.

Install these rollers without the need for set screws or keyways.

Made of neoprene rubber, these rollers resist oil, flames, gasoline, and weather.

These rollers spin freely in one direction and lock to transmit power in the other. Made of neoprene rubber, they are oil, flame, gasoline, and weather resistant.

These urethane rollers are nonmarring and wear resistant.

These urethane rollers are nonmarring and wear resistant.

Add on to an existing screw conveyor or keep it running like new.

Rollers support and help guide material into machinery.

Let gravity move your material from one area to another by connecting these chutes to conveyors and other machinery.

Combine a counter, feeder reel, coiler reel, and stand to create a wire, cable, and cord length measurer.

Also known as hemostats, these tongs enable intricate work in tight spaces and the jaws can be locked closed. The handle has interlocking teeth that allow you to adjust the clamping pressure.

Extra-slim jaws taper to a narrow point that can reach into tight spots.

Use these general purpose tongs for gripping and positioning.

View, grab, and position objects in hard-to-reach spots. These retrievers have a camera and light at the tip of the flexible shaft and an LCD that displays live video. In addition to picking up objects, they can be used in applications such as installing wiring behind walls and extracting clogs and debris from pipes.

Thin wire jaws grasp small or oddly shaped objects.

Push the plunger to engage the magnet; release to disengage. These retrievers bend into position and stay in place.

Remove worn fittings and repair threaded holes.

Thicker than standard fish tape, this fiberglass tape remains stiff along its entire length for long runs of conduit and raceway. It’s nonconductive, so it’s safer to use around energized equipment than metal fish tape.

Safer to use around energized equipment than other types of fish tape, this fiberglass tape is also round, making it more flexible than flat and oval tape to pull wire through multiple bends.