Rule Dies | McMaster-Carr

Filter by

Width

Length

Shape

Material

Temper Rating

Heat Treatment

Hardness Rating

Hardness

Rockwell C48 to Rockwell C51

Yield Strength

Specifications Met

Fabrication

DFARS Specialty Metals

RoHS

REACH

Export Control Classification Number (ECCN)

Maximum Temperature

Elongation

799 Products

About Steel

Compare over 50 grades of steel and cast iron to find the right material for you—all with material certificates for traceability.

Wear-Resistant 1095 Spring Steel Sheets and Strips

Yield Strength: Not Rated
Hardness: Rockwell C48-C51 (Very Hard)
Fabrication: Cold Worked
Specifications Met: ASTM A684

Also known as blue-tempered steel, this 1095 spring steel has a higher carbon content than 1075 spring steel for better wear resistance. It’s often used for spring clips, washers, and other parts that are under continual stress. These sheets and strips are hardened for increased abrasion and impact resistance. All meet ASTM A684 standards for performance and quality.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

0.002" Thick.
Wd.	Lg., ft.	Thick. Tolerance	Heat Treatment	Mechanical Finish	Color		Each
3/4"	10	-0.0002" to 0.0002"	Hardened	Polished	Blue	000000	000000
3/4"	50	-0.0002" to 0.0002"	Hardened	Polished	Blue	000000	000000
1"	10	-0.0002" to 0.0002"	Hardened	Polished	Blue	00000000	00000
1"	50	-0.0002" to 0.0002"	Hardened	Polished	Blue	000000	000000
2"	5	-0.0002" to 0.0002"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.0002" to 0.0002"	Hardened	Polished	Blue	000000	000000
3"	4	-0.0002" to 0.0002"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0002" to 0.0002"	Hardened	Polished	Blue	000000	000000
0.003" Thick.
1/2"	25	-0.0003" to 0.0003"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.0003" to 0.0003"	Hardened	Polished	Blue	0000000	000000
1"	10	-0.0003" to 0.0003"	Hardened	Polished	Blue	000000	00000
1"	50	-0.0003" to 0.0003"	Hardened	Polished	Blue	000000	000000
2"	5	-0.0003" to 0.0003"	Hardened	Polished	Blue	000000	00000
2"	50	-0.0003" to 0.0003"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.0003" to 0.0003"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0003" to 0.0003"	Hardened	Polished	Blue	000000	000000
0.004" Thick.
1/2"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	000000	00000
1/2"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	000000	000000
1"	10	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
2"	5	-0.0004" to 0.0004"	Hardened	Polished	Blue	000000	00000
2"	50	-0.0004" to 0.0004"	Hardened	Polished	Blue	000000	000000
4"	4	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
4"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	000000
6"	2	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.0004" to 0.0004"	Hardened	Polished	Blue	0000000	00000
0.005" Thick.
1/4"	25	-0.0005" to 0.0005"	Hardened	Polished	Blue	000000	00000
1/4"	100	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
3/8"	25	-0.0005" to 0.0005"	Hardened	Polished	Blue	000000	00000
3/8"	100	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
1/2"	25	-0.0005" to 0.0005"	Hardened	Polished	Blue	000000	00000
1/2"	100	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	000000
3/4"	10	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	000000
1"	10	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	000000
1 1/2"	10	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
1 1/2"	100	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	000000
2"	5	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
2"	50	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	000000
3"	5	-0.0005" to 0.0005"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
6"	2	-0.0005" to 0.0005"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.0005" to 0.0005"	Hardened	Polished	Blue	0000000	00000
0.006" Thick.
1/4"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1/2"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1"	10	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
6"	5	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
6"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	000000
0.007" Thick.
1/4"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1/2"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1"	10	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
1"	100	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	000000
6"	5	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	00000
6"	25	-0.0004" to 0.0004"	Hardened	Polished	Blue	00000000	000000
0.008" Thick.
1/4"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	00000
3/8"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	00000
3/8"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	000000
1/2"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
2"	5	-0.0008" to 0.0008"	Hardened	Polished	Blue	0000000	00000
2"	50	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
3"	4	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
6"	2	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
12 3/8"	20	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
0.01" Thick.
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1/2"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
5/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
5/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
7/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
7/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1 1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1 1/2"	75	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
2"	75	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
2 1/2"	5	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
2 1/2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
4"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
6"	4	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
8"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
10"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
12 3/8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
12 3/8"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
0.012" Thick.
3/16"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/16"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1/2"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
4"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
6"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
8"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
10"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
12 3/8"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
12 3/8"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
0.015" Thick.
1/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
5/16"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
5/16"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1/2"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
5/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
5/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1 1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1 1/2"	75	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
4"	4	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
6"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
12 3/8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
12 3/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
0.016" Thick.
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1/2"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
5/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
5/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1 1/2"	75	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3"	6	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
8"	1	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
12 3/8"	1	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
12 3/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
0.018" Thick.
1/4"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
1/2"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
1"	10	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
1"	100	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	000000
3"	5	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.0008" to 0.0008"	Hardened	Polished	Blue	00000000	00000
0.02" Thick.
1/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
5/16"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
5/16"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/2"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
5/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
5/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	4	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
6"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	20	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
12 3/8"	6	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
12 3/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
0.025" Thick.
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
5/16"	25	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
5/16"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1/2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
5/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
5/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
7/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
7/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
1"	75	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1 1/4"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1 1/4"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
2"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
2"	50	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3"	4	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	3	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
10"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
12 3/8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	00000
12 3/8"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
0.028" Thick.
1/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/4"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1/2"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
5/8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
5/8"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3/4"	100	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
1"	75	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
2"	5	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
3"	4	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
3"	25	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
6"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	2	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	000000
10"	1	-0.001" to 0.001"	Hardened	Polished	Blue	00000000	00000
10"	9	-0.001" to 0.001"	Hardened	Polished	Blue	0000000	000000
0.03" Thick.
2"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
6"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
10"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
10"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
12 3/8"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
12 3/8"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
12 3/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
0.032" Thick.
3/16"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/16"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/16"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/16"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1/2"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
5/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/8"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/4"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
2 1/2"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2 1/2"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
4"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
4"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
6"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
10"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
10"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
12 3/8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	00000
12 3/8"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
0.035" Thick.
1/4"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1/2"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/4"	75	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
6"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
10"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
10"	7	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	00000
12 3/8"	7	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
12 3/8"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
0.042" Thick.
1/4"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1/2"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
5/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/8"	75	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3/4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/4"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
4"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	9	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	7	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
10"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
10"	5	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	00000
12 3/8"	5	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
12 3/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
0.05" Thick.
3/16"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/16"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1/2"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/2"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
5/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/8"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/4"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1 1/4"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
2"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
4"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	7 1/2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
8"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	6	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
10"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
10"	4	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	000000
12 3/8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	00000
12 3/8"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
24"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
24"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
0.062" Thick.
3/16"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/4"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3/8"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/8"	100	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1/2"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1/2"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/8"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
5/8"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
3/4"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3/4"	50	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/4"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1 1/2"	4	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 1/2"	25	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
1 3/4"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
1 3/4"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
2"	3	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2"	20	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
2 1/2"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
2 1/2"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3"	2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
3"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
4"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
4"	7	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
6"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
6"	6 1/2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
6"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
8"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
8"	5	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
10"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
10"	3 1/2	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
10"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
12"	10	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	000000
12 3/8"	1	-0.002" to 0.002"	Hardened	Polished	Blue	00000000	00000
12 3/8"	2	-0.002" to 0.002"	Hardened	Polished	Blue	0000000	00000

Easy-to-Form Wear-Resistant 1095 Spring Steel Sheets

Yield Strength: Not Rated
Hardness: Rockwell B90 (Medium)
Fabrication: See table
Heat Treatable: Yes
Max. Hardness After Heat Treatment: Not Rated
Specifications Met: See table

These sheets are annealed to soften their temper, so they can be formed into shape and then heat treated for spring properties. They’re made from 1095 spring steel, which is more wear resistant than 1075 spring steel because of its higher carbon content. These sheets are often made into parts that will be used under continual stress, such as spring clips and washers. They have been manufactured to ASTM standards for quality and performance.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

3" × 3"
Thick.	Thick. Tolerance	Fabrication	Heat Treatment	Specifications Met	Flatness Tolerance		Each
0.015"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.02"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.032"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.035"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.042"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.05"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.062"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.065"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.072"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.078"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.083"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.109"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
1/8"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.134"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.156"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.187"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
8" × 12"
0.01"	-0.001" to 0.001"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.015"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.032"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.035"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.042"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.05"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.065"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.072"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.078"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.083"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
1/8"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.134"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.156"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.187"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
1/4"	-0.008" to 0.008"	Hot Rolled	Annealed (Softened)	ASTM A830	Not Rated	00000000	00000
8" × 24"
0.015"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.032"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.035"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.042"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.05"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.072"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.078"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.083"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
1/8"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.134"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.156"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.187"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	000000
15" × 48"
0.01"	-0.001" to 0.001"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.032"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.035"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.042"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.05"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.062"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.072"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.083"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.094"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	00000
0.109"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	000000
1/8"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	000000
0.187"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	0000000	000000
1/4"	-0.008" to 0.008"	Hot Rolled	Annealed (Softened)	ASTM A830	Not Rated	00000000	000000
24" × 24"
0.015"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.025"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.032"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.035"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.042"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.05"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.062"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.065"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.072"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.078"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.094"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.109"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
1/8"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.134"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.156"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.187"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
24" × 48"
0.01"	-0.001" to 0.001"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.015"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	00000
0.02"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.025"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.032"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.035"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.042"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.05"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.062"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.065"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.072"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.078"	-0.002" to 0.002"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.083"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.094"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.109"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
1/8"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.134"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.156"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
0.187"	-0.003" to 0.003"	Cold Worked	Annealed (Softened)	ASTM A684	3/8"	00000000	000000
1/4"	-0.008" to 0.008"	Hot Rolled	Annealed (Softened)	ASTM A830	Not Rated	00000000	000000

Fatigue-Resistant 301 Stainless Steel

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners. It maintains its corrosion resistance in temperatures up to 1550° F.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Sheets

6" × 6"
Thick.	Thick. Tolerance	Yield Strength, psi	Fabrication	Hardness	Specifications Met		Each
1/4 Hard Temper
0.015"	-0.0015" to 0.0015"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	000000
0.024"	-0.002" to 0.002"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.029"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.042"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.048"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.063"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
0.076"	-0.004" to 0.004"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	00000000	00000
1/2 Hard Temper
0.015"	-0.0015" to 0.0015"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.024"	-0.002" to 0.002"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.029"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.042"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.048"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.063"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
0.076"	-0.004" to 0.004"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	00000000	00000
Full Hard Temper
0.015"	-0.0015" to 0.0015"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.024"	-0.002" to 0.002"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.029"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.042"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.048"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.063"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
12" × 12"
1/4 Hard Temper
0.015"	-0.0015" to 0.0015"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.024"	-0.002" to 0.002"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.029"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.042"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.048"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.063"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.076"	-0.004" to 0.004"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
1/2 Hard Temper
0.015"	-0.0015" to 0.0015"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.024"	-0.002" to 0.002"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.029"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.042"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.048"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.063"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.076"	-0.004" to 0.004"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
Full Hard Temper
0.015"	-0.0015" to 0.0015"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.024"	-0.002" to 0.002"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.029"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.042"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.048"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.063"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
12" × 36"
1/4 Hard Temper
0.015"	-0.0015" to 0.0015"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.024"	-0.002" to 0.002"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.029"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.042"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.048"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	00000
0.063"	-0.003" to 0.003"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	000000
0.076"	-0.004" to 0.004"	75,000	Cold Worked	Rockwell C25 (Hard)	ASTM A666, SAE AMS5517	0000000	000000
1/2 Hard Temper
0.015"	-0.0015" to 0.0015"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.024"	-0.002" to 0.002"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.029"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.042"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.048"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	00000
0.063"	-0.003" to 0.003"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	000000
0.076"	-0.004" to 0.004"	110,000	Cold Worked	Rockwell C30 (Hard)	ASTM A666, SAE AMS5518	0000000	000000
Full Hard Temper
0.015"	-0.0015" to 0.0015"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.024"	-0.002" to 0.002"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.029"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.042"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.048"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.063"	-0.003" to 0.003"	140,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000

Spring Temper
Thick.	Thick. Tolerance	Wd.	Lg., ft.	Yield Strength, psi	Fabrication	Hardness	Specifications Met		Each
0.002"	-0.0002" to 0.0002"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	000000
0.002"	-0.0002" to 0.0002"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.003"	-0.0003" to 0.0003"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.003"	-0.0003" to 0.0003"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.004"	-0.0003" to 0.0003"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.005"	-0.0003" to 0.0003"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.006"	-0.0004" to 0.0004"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.006"	-0.0004" to 0.0004"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.008"	-0.0004" to 0.0004"	6"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	8"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.008"	-0.0004" to 0.0004"	8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.008"	-0.0004" to 0.0004"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.01"	-0.0007" to 0.0007"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.012"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	6"	20	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	8"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	10"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	10"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.015"	-0.001" to 0.001"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	6"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.025"	-0.001" to 0.001"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.025"	-0.001" to 0.001"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.031"	-0.0015" to 0.0015"	6"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000
0.031"	-0.0015" to 0.0015"	12"	1	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	00000000	00000

Strips

Spring Temper
Thick.	Thick. Tolerance	Wd.	Lg., ft.	Yield Strength, psi	Fabrication	Hardness	Specifications Met		Each
0.002"	-0.0002" to 0.0002"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	000000
0.003"	-0.0003" to 0.0003"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.003"	-0.0003" to 0.0003"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.004"	-0.0003" to 0.0003"	1"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.004"	-0.0003" to 0.0003"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.004"	-0.0003" to 0.0003"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.005"	-0.0003" to 0.0003"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.005"	-0.0003" to 0.0003"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.006"	-0.0004" to 0.0004"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.006"	-0.0004" to 0.0004"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.006"	-0.0004" to 0.0004"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.006"	-0.0004" to 0.0004"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	1/2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	3/4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	3/4"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	1"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.008"	-0.0004" to 0.0004"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.008"	-0.0004" to 0.0004"	3"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	2"	75	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	3"	75	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.01"	-0.0007" to 0.0007"	4"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	6"	20	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.01"	-0.0007" to 0.0007"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.012"	-0.001" to 0.001"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.012"	-0.001" to 0.001"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	2"	75	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.015"	-0.001" to 0.001"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.015"	-0.001" to 0.001"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	2"	50	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.02"	-0.001" to 0.001"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	6"	20	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.02"	-0.001" to 0.001"	12"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	5/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	5/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	1"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	1"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	2"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.025"	-0.001" to 0.001"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	6"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.025"	-0.001" to 0.001"	12"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	1/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	1/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	3/8"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	3/8"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	1/2"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	1/2"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	3/4"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	3/4"	100	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	1"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	1"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	2"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	0000000	00000
0.031"	-0.0015" to 0.0015"	2"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	3"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	000000	00000
0.031"	-0.0015" to 0.0015"	3"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	4"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666, SAE AMS5519	000000	00000
0.031"	-0.0015" to 0.0015"	4"	25	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	6"	10	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	000000000	000000
0.031"	-0.0015" to 0.0015"	12"	5	142,000	Cold Worked	Rockwell C40 (Hard)	ASTM A666	00000000	000000