Gentle enough for precision finishing but tough enough for metalworking jobs, emery sheets are used for rust removal, deburring, and surface prep. They have a slow-cutting grit that gives you control for detail work.

Everything you need to finish hard metals, even on curved surfaces and in hard-to-reach spots. The two abrasive sides are more rigid than on other sanding pads to cut through stainless steel and iron. Pads are cushioned with foam for controlled sanding pressure. They won’t deteriorate when wet-sanding with water or lubricants.

The extra-sharp abrasive cuts through hard metals faster than other discs. A hook-and-loop mount lets you switch grits and avoid the waste of adhesive-backed discs, which are done after one use. Pair with a compatible sanding tool or backup pad (sold separately).

Sand stainless steel, titanium, iron, and other hard metals without the mess. The holes in these rolls work with any style of vacuum sander to clear debris and prevent buildup on the extra-sharp abrasive. Trim rolls to length or tear at perforated lines every 2_3/4" for quick setup. The hook-and-loop mount makes it easy to attach, remove, and reuse each sheet.

A sharp abrasive cuts through tough metals such as stainless steel, titanium, and iron. Trim these rolls for the length you need.

Tackle hard materials with the combination of rigid abrasive and a flexible backing that conforms to curves and corners. These small pads fit tight spaces and are cushioned with foam for controlled sanding pressure. They have two abrasive sides and hold up to water and lubricants.

Create finer and more consistent finishes—these belts have a cushioned layer that creates more even sanding pressure on your workpiece. They also have a slick coating that prevents debris from accumulating on the abrasive surface and keeps operating temperatures low.

Sand complex shapes, corners, and edges with foam discs that conform to your workpiece. The open cell material holds liquid for seamless wet sanding. Discs are also washable, so give them a quick rinse if they clog. The hook-and-loop mount lets you switch grits without waste, unlike adhesive-backed discs. Pair discs with a compatible sanding tool or backup pad.

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.