These sulfur-free coolants won’t react with or stain soft metal, such as aluminum or copper. Mix them with water to remove heat, prevent workpiece corrosion and distortion, and improve accuracy while cutting. Use them with power hacksaws, circular saws, and band saws. Made with semi-synthetic oil, they are a mix of synthetic and mineral oil for added lubricity. They are chlorine free for use where chlorine waste disposal is a concern.

Dissipate heat and prevent corrosion with these coolants that stand up to long machining cycles when milling and turning. They are chlorine free for use where chlorine waste disposal is a concern.

For general-purpose grinding, sanding, and finishing, these coolants prevent material from building up to ensure a high-quality finish and preserve tool life. All are sulfur free.

Lubricants without chlorine can be used where chlorine waste disposal is a concern.

Misting coolant dispensers (sold separately) use considerably less coolant than flood systems while still cooling intermittent machine cycles. Made of synthetic base oil, these coolants have excellent cooling properties to prolong tool life, are long lasting, and prevent corrosion. They inhibit bacteria growth to prevent foul odors. All are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Dilute with water.

Micro-drop coolant dispensers (sold separately) reduce heat with small, controlled droplets of coolant and air that dissipate heat and resist misting. Because only a small amount of coolant is used, they’re easy to clean up. Use for small jobs. They prevent corrosion and inhibit bacteria growth to prevent foul odors. They are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.

Apply these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.

An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.