Weigh loads without obstructing the display. Mount the display up to 9 feet from the platform. The tare function lets you reset the scale to zero after placing a container on the platform. Scales operate on the included AC adapter or batteries (not included).

These scales are small enough to carry with you for measurements on the go.

Scales with tare function let you reset the scale to zero after placing a container on the platform.

A stack light and audible alarm alert you when packages, products, and parts are too heavy or too light. Also known as check weighers, these scales verify quality and consistency in packing, parts machining, and other activities. Set your weight range, and the stack light tells you if an object is OK to go using three colored lights: one for too heavy, one for too light, and one for just right. Specific measurements appear on a bright, backlit LCD.

The scale's memory stores up to 10 weight ranges, so you can switch from one range to another as your tasks change. In counting mode, the scale tallies the total number of parts based on the weight of a single part. When using a container to hold small items, press the tare button to reset the scale to zero. To print or transfer data to a computer, connect an RS-232 computer cord (not included) to the scale's DB9 port.

Safely weigh material in hazardous environments—these scales operate with low voltages so they won’t create sparks. They’re FM approved for Class I, Divisions 1 and 2, Groups C and D environments, so they can be used where flammable gases, vapors, and liquids with characteristics similar to propane and ethylene can be found under normal operating conditions.

These scales are among the most accurate bench-top scales we offer, so you don’t have to compromise precision for safety. They have several different modes: check weighing notifies you if an item falls outside of a certain weight range, counting keeps tally as you add or remove pieces, and the tare function resets the scale to zero after placing a container on the platform. A backlit LCD display lets you easily read out measurements in low lighting.

Scales run for 200 hours on four AA batteries (sold separately). Use a carrying case (sold separately) for secure transport.

For technical drawings and 3-D models, click on a part number.

The attached cover protects the scale while you carry it. The tare function lets you reset the scale to zero after placing a container on the platform.

For technical drawings and 3-D models, click on a part number.

Place these scales on your bench top to handle weighing jobs right where you work.

Stainless steel platforms are more corrosion resistant than steel platforms.

For technical drawings and 3-D models, click on a part number.

These scales are often used on small bench tops where larger scales won’t fit. They meet NSF/ANSI 169 standards for equipment used with food.

A stainless steel housing and platform resist corrosion in wet conditions and harsh environments.

For technical drawings and 3-D models, click on a part number.

For corrosion resistance in addition to portability, this scale has a powder-coated steel housing and platform.

Weigh small quantities of lightweight materials.

Manual reset to zero allows you to zero out weight up to 225 g.

Optional weight set (sold separately) increases the capacity of the scale.

IP rated for washdowns and use in dusty and wet environments, these scales are NTEP approved to weigh materials that are sold by weight. All have a check weighing mode that alerts you when items fall outside a set weight range, an accumulation weighing mode to keep a running total of all the items you’ve weighed, and a tare function that resets the scale to zero after placing a container on the platform. A large LCD display with a touch keypad makes it easy to read and select measurements, even when wearing goggles and gloves.

When powered by batteries, IP65-rated scales are dust-tight and can be hosed down. They should not, however, get wet when they’re plugged in. Scales with a 10-lb. capacity or lower are better for measuring lighter loads more precisely than our scales with higher capacities.

To handle the most rigorous washdown applications, IP69K-rated scales protect against dust and high-pressure, high-temperature washdowns. They’re also NEMA 4X rated for use outside or in mildly corrosive environments. If you accidentally place a heavy object on the scales, they’re durable enough to handle it; they withstand a load up to 1,000% of their capacity. The display on these scales is detachable, so you can mount it to the column, on the wall, under a counter, or in front of the scale. To print or transfer data to a computer, connect an RS-232 computer cord (not included) to the scale's DB9 port.

Position the display up to 6 feet from the platform for an unobstructed view when weighing large loads. These scales are NTEP approved for weighing materials sold by weight. All have a tare function that lets you reset the scale to zero after placing a container on the platform. They have a power cord.

For technical drawings and 3-D models, click on a part number.

Count parts in addition to weighing material. These scales have a tare function that lets you reset the scale to zero after placing a container on the platform.

Style C show total weight, unit weight, and quantity simultaneously. They have a power cord and can also operate on the included rechargeable battery.

For technical drawings and 3-D models, click on a part number.

NTEP approved for use with materials sold by weight, these scales count parts in addition to weighing material. The counting function can be turned off for use as a weigh-only scale. Scales have a 9-pin RS-232 serial port to connect to your PC with a data cord (sold separately). The tare function lets you reset the scale to zero after placing a container on the platform.

Stainless steel platforms are more corrosion resistant than steel.

Optional data logging software (sold separately) is Windows compatible and allows you to upload data.