About Sealant Flexibility
More
About Structural Adhesives
More
About Paint and Protective Coatings
More
Sealants
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi  | Hardness | Temp. Range, °F | For Joining | Color | 1-11 | 12-Up | |
Hybrid Polymer | |||||||||||||
| 10.1 | Cartridge | 60 min. | 3 days | 1,000% | -50% to 50% | 350 | Soft (Durometer 25A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Glass Plastic Plastic to Rubber Plastic to Glass Rubber Rubber to Glass Glass Masonry Wood | Tan | 0000000 | 00000 | 00000 |
All-Weather Application Structural Sealants
Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Polyether | ||||||||||||
| 10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | Tan | 0000000 | 000000 |
Paint for Metal
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.
Paint in an aerosol can does not require a primer.
Paint | Primer | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Dry Time | Each | Each | ||||||||||||
| Net Weight, oz. | Composition | Touch | O'all | Approx. Coverage @ Thick. | Max. Temp., °F | For Use On | Primer Required For Use On | Color (Appearance) | 1-5 | 6-Up | Choose a Color | 1-5 | 6-Up | ||
Alkyd—Aerosol Can | |||||||||||||||
| 15 | Solvent Based | 20 min. | 24 hrs. | 15 sq. ft. @ 1 mil | 200° | Aluminum, Steel, Iron, Masonry, Concrete, Wood | Iron, Masonry, Concrete, Wood | Tan (Gloss) | 000000 | 000000 | 000000 | 000000 | 000000 | 000000 | |
Low-Odor Paint for Metal
Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading. It resists weather, salt spray, mild chemicals, and abrasion. Apply with a brush, roller, or sprayer.
Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Formulation | Touch, hrs. | O'all, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Use Outdoors | For Use On | Color (Appearance) | Each | |
| 1 | Solvent Based | Alkyd | 6 | 24 | 300 sq. ft. @ 2 mil | 120° | Yes | Steel | Tan (Gloss) | 00000000 | 0000000 |
Paint for Plastic
This paint adheres to most types of plastic without sanding or priming.
Paint that cannot be sold to Canada is restricted by local chemical regulations.
Dry Time | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Net Weight, oz. | Composition | Formulation | Touch, min. | O'all, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Use Outdoors | For Use On | Color (Appearance) | 1-5 | 6-Up | |
| 12 | Solvent Based | Alkyd | 20 | 24 | 10 sq. ft. @ 1.5 mil | 90° | Yes | ABS Plastic, PVC Plastic, Vinyl Plastic | Tan (Gloss) | 0000000 | 00000 | 00000 |
Adjustable-Flexibility Heat-Transfer Potting Compounds
Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Hardness Rating | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
Jar Compounds | ||||||||||||
| 12 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 0000000 |
| 24 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 000000 |
Jar and Syringe Compounds | ||||||||||||
| 1.6 | Thick Liquid | 30 | 26 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1.01 | -100° to 450° | 2 hrs. @ 250° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 00000 |
Heavy Duty Epoxy Primers for Metal
Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Net Weight, oz. | Composition | Touch, min. | Overall, hrs. | Approx. Coverage @ Thick. | Max. Temp., °F | For Topcoat Composition | For Use On | Color | Each | |
| 13 | Solvent Based | 15 | 2 | 8 sq. ft. @ 1 mil | 210° | Solvent Based, Water Based | Aluminum, Steel, Galvanized Steel | Tan | 00000000 | 000000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts.
ClearWeld and Plastic Bonder can be applied to wet surfaces.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
| Plastic Bonder | 50133 | 0.85 | Syringe | 15 min. | 30 min. | 1,700 | 1:1 | Paste | Not Rated to 200° | Tan | Submersible | Plastic | 0000000 | 00000 |
Construction Adhesives for Wall Bases
Adhere vinyl and rubber wall bases to wood, drywall, and concrete with these water-resistant adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
| 29 fl. oz. | Cartridge | 90 ft. @ 1/4" bead | 20 min. | 72 hrs. | 25 | 10 | Paste | 55° to 100° | Tan | No | Masonry, Plastic, Rubber, Wood | 0000000 | 000000 |
Wood Surface Fillers
Fix damaged wood or build up and replace missing wood. These two-part fillers are nonshrinking and chemical resistant. At full strength, they can be sanded, painted, and varnished. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Consistency | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Mixing Required | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use Outdoors | For Use On | Each | |
| 12 fl. oz. | Jar | Putty | 1 | 8 | Yes | 1:1 | 85 sq. in. @ 1/4" | 3/4" | 0° to 200° | Tan | Drill, Sand, Saw, Tap | Yes | Wood | 000000 | 000000 |