Straight Ladders
![](/prerenderstable/mvPRE/contents/gfx/imagecache/801/8011t72-@halfx_637297041876879956.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g01/g01a-extensionladderusel2--6059b566e331558112348-p9@halfx_636936911512469311.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/812/8129t14p2-g01a-digital@halfx_636867933715427092.png?ver=imagenotfound)
Straight ladders are ready for use without unfolding or adjusting.
Fiberglass ladders are nonconductive for use in electrical work.
Ladders with 6" rubber bumpers protect surfaces from scrapes and damage. They are also known as shelf ladders.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed.
Overall | Step | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht., ft. | Wd. | Max. Climbing Ht. | Wt., lbs. | No.of Steps | Material | Tread | Features | Specifications Met | Each | |
Fiberglass | ||||||||||
(300-lb. Cap.) | ||||||||||
6 | 16" | 2'6" | 9 | 6 | Aluminum | Ribbed | 6" Rubber Bumpers | OSHA Compliant 29 CFR 1926.1053 | 0000000 | 0000000 |
8 | 16" | 4'5" | 12 | 8 | Aluminum | Ribbed | 6" Rubber Bumpers | OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
10 | 16" | 6'5" | 20 | 10 | Aluminum | Ribbed | 6" Rubber Bumpers | OSHA Compliant 29 CFR 1926.1053 | 0000000 | 000000 |
Extra-Stability Extension Ladders
![](/prerenderstable/mvPRE/contents/gfx/imagecache/368/3689n11-@halfx_636936909754168058.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g01/g01a-extensionladderusel2--6059b566e331558112348-p9@halfx_636936911512469311.png?ver=imagenotfound)
Outriggers on these ladders provide stability on uneven surfaces and help prevent tipping. A built-in level on the bottom rung makes it easy to ensure the ladder is set up safely. The nonconductive fiberglass rails are fluorescent green for high visibility. Adjust them to the height you need with the side-mounted pulley rope, which removes the potential tripping hazard that most extension ladders have with the rope in the center. Ladders have two equal-length, movable sections and spring-loaded locks to keep the raised section securely in place after adjustment.
ANSI A14.5 certifies dimensional and performance requirements for fiberglass ladders. Type 1A ladders are tested to hold up to 300 lbs. Type 1AA ladders are tested to hold up to 375 lbs.
Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe operating practices. Per OSHA regulations, the ladder rails must rise at least three feet above the elevated surface being accessed. The top three rungs on these ladders are red to indicate they must be set up above the elevated surface.
Step | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Retracted Ht. | Max. Extended Ht. | Max. Climbing Ht. | Overall Wd. Range | Wt., lbs. | No. of Steps | Material | Tread | Specifications Met | Features | Each | |
Fiberglass | |||||||||||
Type 1A (300-lb. Cap.) | |||||||||||
10'8" | 17'5" | 13'4" | 21"-46" | 45 | 19 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 0000000 |
12'7" | 21'4" | 17'2" | 21"-46" | 52 | 23 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
14'7" | 25'3" | 21' | 21"-46" | 57 | 27 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
20'6" | 35'1" | 30'7" | 23"-45" | 81 | 39 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 00000000 |
8'8" | 13'5" | 9'6" | 21"-46" | 39 | 15 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
Type 1AA (375-lb. Cap.) | |||||||||||
10'8" | 17'5" | 13'4" | 32"-47" | 47 | 19 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
12'7" | 21'4" | 17'2" | 32"-47" | 53 | 23 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
14'7" | 25'3" | 21' | 32"-47" | 59 | 27 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
16'6" | 29'2" | 24' | 23"-45" | 70 | 31 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
8'8" | 13'5" | 9'6" | 32"-47" | 41 | 15 | Aluminum | Ribbed | ANSI A14.5, OSHA Compliant 29 CFR 1910.23, OSHA Compliant 29 CFR 1926.1053 | Built-In Level, Leveling Outriggers | 0000000 | 000000 |
Rolling Platform Ladders with Shelves
![](/prerenderstable/mvPRE/contents/gfx/imagecache/811/8118t93c1-g01a-digital-master1551217081-p9@halfx_636598987078320000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g01/g01a-ladders-stepp3-ga-@halfx_637327510390930416.png?ver=imagenotfound)
Picking and putting away material just got easier. Ladders have three shelves with raised edges that each hold 70 lbs. Platform and steps are serrated for maximum slip resistance. Use the step lock to keep casters stationary.
You are responsible for adhering to local, state, and federal safety codes, including OSHA.
Note: The number of steps listed includes the platform.
Ladders | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Platform | Shelf | Replacement Casters | |||||||||||||||||
Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Wd. (E) | Dp. (F) | Max. Climbing Ht. | No. of Steps | Cap., lbs. | Ground Clearance Ht. | Cap., lbs. | Wd. | Dp. | Color | Wheel Configuration | Specifications Met | Each | No. of Casters | Each | ||
Powder-Coated Steel Ladders with Step Lock | ||||||||||||||||||||
Serrated Steps and Platform | ||||||||||||||||||||
8'8" | 32" | 62" | 5' | 24" | 28 1/2" | 5' | 6 | 450 | 5" | 70 | 24" | 20" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 000000000 | 4 | 00000000 | 000000 |
9'6" | 32" | 60" | 5'10" | 24" | 19" | 5'10" | 7 | 450 | 5" | 70 | 24" | 20" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |
10'4" | 32" | 65" | 6'8" | 24" | 19" | 6'8" | 8 | 450 | 5" | 70 | 24" | 20" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |
10'10" | 32" | 78" | 8'4" | 24" | 19" | 8'4" | 10 | 450 | 5" | 70 | 24" | 20" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |
11'2" | 32" | 72" | 7'6" | 24" | 19" | 7'6" | 9 | 450 | 5" | 70 | 24" | 20" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |
11'8" | 32" | 84" | 9'2" | 24" | 19" | 9'2" | 11 | 450 | 5" | 70 | 24" | 20" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |
12' | 35" | 78" | 8'4" | 23" | 19" | 8'4" | 10 | 450 | 5" | 70 | 26" | 23 3/4", 27 3/4", 29 1/4" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |
12'10" | 37" | 84" | 9'2" | 23" | 19" | 9'2" | 11 | 450 | 5" | 70 | 26" | 23 3/4", 27 3/4", 29 1/4" | Gray | Two Swivel and Two Rigid Casters | OSHA Compliant 29 CFR 1910.23 | 0000000 | 00000000 | 4 | 00000000 | 00000 |