McMaster-Carr logo
    Filter by
    System of Measurement
    Thickness
    Shape
    Screw Size
    Industrial Info Compare
    Shaft Type
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Sold As
    Washer Type
    Passivation
    Width
    Attribute Image
    Backing Type
    Form
    Specifications Met
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    73 Products

    Shims

    Image of Product. Front orientation. Shims. Round, Sold Individually.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Stress-Resistant Spring Steel—These shims are harder and hold their shape better than carbon steel. Use them for high-stress applications, such as leveling heavy machinery. They're best for dry environments since moisture will cause them to rust.
    Aluminum—These shims are an alternative to stainless steel for rust resistance but aren't as hard so they may not retain their shape as well. One-third the weight of steel, they’re commonly used in robotics and automation.
    Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.
    Copper—Good conductors of heat, these shims are often used when installing heat sinks. As our softest metal shims, they prevent damage to equipment and components but may not retain their shape as well as other metal shims.
    Ultra-Chemical-Resistant PTFE—The most chemical-resistant shims we offer, these stand up to the widest range of harsh acids, bases, solvents, and corrosive cleaners, even at temperatures up to 500° F. They also won't mar delicate surfaces.
    Thk.,
    mm
    Thk. Tolerance,
    mm
    ID Tolerance,
    mm
    OD Tolerance,
    mm
    Min.
    Hardness
    Color
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    4 mm ID × 8 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A28200000
     
    5 mm ID × 10 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A2860000
     
    6 mm ID × 12 mm OD
    0.3-0.055 to 0.055-0.31 to 0.29-0.11 to -0.01Rockwell B70——2598089A2890000
     
    8 mm ID × 14 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A2930000
     
    10 mm ID × 16 mm OD
    0.3-0.055 to 0.055-0.29 to 0.31-0.05 to 0.05Rockwell B70——2598089A2970000
     
    12 mm ID × 18 mm OD
    0.3-0.055 to 0.055-0.31 to 0.29-0.04 to 0.06Rockwell B70——2598089A3010000
     
    14 mm ID × 20 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.06 to 0.04Rockwell B70——2598089A30500000
     
    16 mm ID × 22 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A30900000
     
    18 mm ID × 25 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A3110000
     
    20 mm ID × 28 mm OD
    0.3-0.055 to 0.055-0.31 to 0.29-0.06 to 0.04Rockwell B70——2598089A31300000
     
    22 mm ID × 30 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A3150000
     
    25 mm ID × 36 mm OD
    0.3-0.055 to 0.055-0.31 to 0.29-0.06 to 0.04Rockwell B70——1098089A31700000
     
    30 mm ID × 42 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.04 to 0.06Rockwell B70——1098089A32100000
     
    35 mm ID × 45 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.04 to 0.06Rockwell B70——1098089A32500000
     
    40 mm ID × 50 mm OD
    0.3-0.055 to 0.055-0.29 to 0.31-0.04 to 0.06Rockwell B70——1098089A32900000
     
    45 mm ID × 55 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.05 to 0.05Rockwell B70——2598089A73200000
     
    50 mm ID × 62 mm OD
    0.3-0.055 to 0.055-0.29 to 0.31-0.07 to 0.03Rockwell B70——598089A73400000
     
    55 mm ID × 68 mm OD
    0.3-0.055 to 0.055-0.31 to 0.290.02 to 0.12Rockwell B70——598089A73800000
     
    60 mm ID × 75 mm OD
    0.3-0.055 to 0.055-0.31 to 0.29-0.12 to -0.02Rockwell B70——598089A74200000
     
    70 mm ID × 90 mm OD
    0.3-0.055 to 0.055-0.3 to 0.3-0.13 to -0.03Rockwell B70——198089A7460000
     
    Highly Corrosion-Resistant 316 Stainless Steel
     
    6 mm ID × 12 mm OD
    0.3-0.015 to 0.015-0.13 to 0.13-0.13 to 0.13Rockwell B70—ASTM A240190214A9010000
     
    8 mm ID × 14 mm OD
    0.3-0.015 to 0.015-0.13 to 0.13-0.13 to 0.13Rockwell B70—ASTM A240190214A9020000
     
    10 mm ID × 16 mm OD
    0.3-0.015 to 0.015-0.13 to 0.13-0.13 to 0.13Rockwell B70—ASTM A240190214A9040000
     
    12 mm ID × 18 mm OD
    0.3-0.015 to 0.015-0.13 to 0.13-0.13 to 0.13Rockwell B70—ASTM A240190214A9060000
     
    Carbon Steel
     
    5 mm ID × 10 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A0420000
     
    8 mm ID × 14 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A0440000
     
    10 mm ID × 16 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A0450000
     
    16 mm ID × 22 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A0480000
     
    20 mm ID × 28 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A050000
     
    22 mm ID × 30 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A0510000
     
    30 mm ID × 42 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——53088A0530000
     
    40 mm ID × 50 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——13088A0550000
     
    55 mm ID × 68 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——13088A60400000
     
    80 mm ID × 100 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B40——13088A0600000
     
    Stress-Resistant Spring Steel
     
    4 mm ID × 8 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9885098055A0870000
     
    5 mm ID × 10 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9885098055A0970000
     
    6 mm ID × 12 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9885098055A1070000
     
    8 mm ID × 14 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9885098055A1130000
     
    10 mm ID × 16 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9885098055A1190000
     
    12 mm ID × 18 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9885098055A1270000
     
    14 mm ID × 20 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9882598055A2130000
     
    16 mm ID × 22 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9882598055A2210000
     
    18 mm ID × 25 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9882598055A2300000
     
    20 mm ID × 28 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9882598055A2350000
     
    22 mm ID × 30 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9882598055A2440000
     
    25 mm ID × 36 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9882598055A2530000
     
    30 mm ID × 42 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9881098055A3230000
     
    35 mm ID × 45 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9881098055A3440000
     
    40 mm ID × 50 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9881098055A3590000
     
    45 mm ID × 55 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 9881098055A3820000
     
    50 mm ID × 62 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 988598055A4310000
     
    55 mm ID × 68 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 988598055A4460000
     
    60 mm ID × 75 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 988598055A4670000
     
    70 mm ID × 90 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 988598055A5150000
     
    80 mm ID × 100 mm OD
    0.3-0.05 to 00.03 to 0.4-0.47 to -0.04Rockwell B85—DIN 988198055A7190000
     
    Aluminum
     
    6 mm ID × 12 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Brinell 60——592661A9140000
     
    20 mm ID × 28 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Brinell 60——592661A9180000
     
    25 mm ID × 36 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Brinell 60——592661A91900000
     
    Brass
     
    6 mm ID × 12 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B14—ASTM B36592678A6210000
     
    8 mm ID × 14 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B14—ASTM B36592678A6220000
     
    12 mm ID × 18 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell B14—ASTM B36592678A6240000
     
    Copper
     
    8 mm ID × 14 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell F40—ASTM B152594397A7670000
     
    10 mm ID × 16 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5Rockwell F40—ASTM B152594397A7680000
     
    Ultra-Chemical-Resistant PTFE
     
    6 mm ID × 12 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5—White—590334A20900000
     
    12 mm ID × 18 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5—White—590334A21100000
     
    20 mm ID × 28 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5—White—590334A21200000
     
    25 mm ID × 36 mm OD
    0.3-0.072 to 0.072-0.3 to 0.3-0.5 to 0.5—White—190334A2130000
     

    Shim Stock

    Image of Product. Front orientation. Shim Stock. Sold Individually.
    Cut into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Carbon Steel—Best for dry areas since moisture will cause it to rust.
    Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.
    Certificate
    Thk.,
    mm
    Thk. Tolerance,
    mm
    Temper
    Rating
    Specs. Met
    Form
    Type
    Form
    Each
    18-8 Stainless Steel
     
    150 mm Wide × 1,250 mm Long
    0.3-0.015 to 0.015Full HardASTM A666RollMaterial Certificate
    		Paper
    		95055K21000000
     
    Carbon Steel
     
    150 mm Wide × 2,500 mm Long
    0.3-0.015 to 0.015Full HardASTM A109, Fed. Spec. QQ-S-698RollMaterial Certificate
    		Paper
    		95085K2100000
     

    Wave Spring Lock Washers

    Image of Product. Front orientation. Lock Washers. Wave Washer, Spring Lock Washer.
    The wavy shape flexes like a spring to keep nuts and screws secure on slightly uneven surfaces. These washers add a small amount of tension to stop fasteners from backing out due to mild vibration. While they don't hold as well as other lock washers, they do grip slightly better than curved washers. They work best in electrical panels, light fixtures, and other light duty assemblies. Since these washers hold their shape when untightened, you can reuse them a handful of times without losing strength.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    3 Wave—More points of contact than single-wave washers for a better grip.
    For Screw
    Size
    No. of
    Waves
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Overall
    Ht., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M2
    		32.44.20.30.9—1092161A047000000
    M2.5
    		12.75.00.31.4DIN 137B5092168A11800000
     

    Curved Spring Lock Washers

    Image of Product. Front orientation. Lock Washers. Curved Washer, Spring Lock Washer.
    The curvy, spring-like shape adds a small amount of tension to prevent nuts and screws from backing out due to mild vibration. These washers also flex slightly to compensate for uneven surfaces. While more secure than a standard flat washer, these have the least amount of gripping power of all our lock washers. They are best suited for electrical panels, light fixtures, and other light duty assemblies. These washers hold their shape when untightened, so you can reuse them a handful of times without losing strength.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these washers won't rust when exposed to moisture. However, they can't hold up to the harsh chemicals that 316 stainless steel can.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Overall
    Ht., mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M2
    		2.24.50.31.0DIN 137A10097099A10100000
     
    Zinc-Plated Steel
    M2
    		2.24.50.31.0DIN 137A10097069A1010000
     
    back to top