DIN 1481 Spring Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Material

Shaft Type

Hole Diameter

Specifications Met

Performance

Wall Thickness

Pin Type

Passivation

Fastener Head Type

End Type

Double Shear Breaking Strength

Minimum Hardness

Hardness

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Compliant

Exempt

Not Compliant

Export Control Classification Number (ECCN)

RoHS

REACH

Sold As

Number of Pieces

Container Features

Container Type

89 Products

Performance

Corrosion Resistant

Resist rust in wet and outdoor environments

76 products

Stress Resistant

Withstand continuous stress and twisting forces

13 products

Sold As

Assortment

A range of sizes to fit a variety of hole diameters

1 product

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg., mm	For Hole Dia., mm	Wall Thk., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel







				1 mm Diameter

				4	1	0.2	150	Rockwell C42	DIN 1481, ISO 8752	100	91611A065	00000




						1.5 mm Diameter

						4	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	91611A076	0000


						5	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	91611A079	0000
						6	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	91611A081	00000
						8	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	91611A083	00000
						12	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	91611A085	00000




								2.5 mm Diameter

								10	2.5 to 2.6	0.5	950	Rockwell C42	DIN 1481, ISO 8752	100	91611A096	0000




										3 mm Diameter

										36	3 to 3.1	0.6	1,400	Rockwell C42	DIN 1481, ISO 8752	100	91611A173	00000




												5 mm Diameter

												10	5 to 5.2	1	3,900	Rockwell C42	DIN 1481, ISO 8752	100	91611A303	00000




														6 mm Diameter

														100	6 to 6.2	1.2	5,800	Rockwell C42	DIN 1481, ISO 8752	10	91611A447	00000




																8 mm Diameter

																100	8 to 8.25	1.5	9,600	Rockwell C42	DIN 1481, ISO 8752	5	91611A544	0000




																		10 mm Diameter

100																		10 to 10.3	2	15,700	Rockwell C42	DIN 1481, ISO 8752	5	91611A641	00000


Corrosion-Resistant 18-8 Stainless Steel







																		2 mm Diameter

				6														2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A202	0000


				8	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A204	0000
				10	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A205	0000
				12	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A206	0000
				14	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A207	0000
				16	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A208	0000
				18	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A209	0000
				20	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A210	0000
				24	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A211	0000
				30	2 to 2.1													0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A212	0000




						2.5 mm Diameter

						20	2.5 to 2.6											0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A251	0000


						30	2.5 to 2.6	0.5										Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A254	0000




								3 mm Diameter

								8	3 to 3.1	0.6								Not Rated	Not Rated	DIN 1481, ISO 8752	25	91610A404	0000


								10	3 to 3.1	0.6	Not Rated							Not Rated	DIN 1481, ISO 8752	25	91610A405	0000
								12	3 to 3.1	0.6	Not Rated							Not Rated	DIN 1481, ISO 8752	25	91610A406	0000
								14	3 to 3.1	0.6	Not Rated							Not Rated	DIN 1481, ISO 8752	25	91610A407	0000
								16	3 to 3.1	0.6	Not Rated							Not Rated	DIN 1481, ISO 8752	25	91610A408	0000
								18	3 to 3.1	0.6	Not Rated	Not Rated						DIN 1481, ISO 8752	25	91610A409	0000
								20	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A410	0000
								24	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A411	0000
								26	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A418	0000
								28	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A421	0000
								30	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A412	0000


								40	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A414			0000




										3.5 mm Diameter

										10	3.5 to 3.65	0.75	Not Rated	Not Rated	DIN 1481, ISO 8752	50	91610A450	00000




4 mm Diameter

10	4 to 4.2											0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A504	0000


12	4 to 4.2											0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A506	0000
14	4 to 4.2	0.8										Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A507	0000
16	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A508	0000
18	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A509	0000
20	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A510	0000
24	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A511	0000
26	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A519	0000
30	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A512	0000
32	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A513	0000
36	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A521	0000


40	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A514	0000
45	4 to 4.2	0.8	Not Rated									Not Rated	DIN 1481, ISO 8752	10	91610A515	0000




		5 mm Diameter

		10	5 to 5.2	1								Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A599	0000


		12	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A601	0000
		16	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A605	0000
		20	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A610	0000
		22	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A621	0000
		24	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A611	0000
		26	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A624	0000
		30	5 to 5.2	1	Not Rated							Not Rated	DIN 1481, ISO 8752	10	91610A612	0000
		36	5 to 5.2	1	Not Rated	Not Rated						DIN 1481, ISO 8752	10	91610A613	0000
		40	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A614	0000
		50	5 to 5.2	1	Not Rated	Not Rated	DIN 1481, ISO 8752					10	91610A616	0000




				6 mm Diameter

				12	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A702	0000


				16	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A705	0000
				20	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A710	0000
				24	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A711	0000
				26	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A719	0000
				30	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A712	0000
				36	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A713	0000
				40	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A714	0000
				45	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	10	91610A722	0000
				50	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	5	91610A716	0000
				60	6 to 6.2	1.2	Not Rated					Not Rated	DIN 1481, ISO 8752	5	91610A724	0000




						8 mm Diameter

						22	8 to 8.25	1.5	Not Rated			Not Rated	DIN 1481, ISO 8752	10	91610A805	0000


						26	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A807	0000
						30	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A812	0000
						40	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	5	91610A814	0000
						50	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A816	0000
						55	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A821	0000
						60	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A825	0000
						100	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A845	0000




								10 mm Diameter

								24	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A907	0000


								30	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A916	0000
								36	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A919	0000
								40	10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A923	0000
50								10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A927	0000
60	10 to 10.3							2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A931	0000
80	10 to 10.3							2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A936	0000
100	10 to 10.3							2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	91610A957	0000

Slotted Spring Pin Assortments

Keep a range of sizes on hand to secure a variety of parts. Squeeze these pins into holes and they expand slightly, creating tension to stay in place. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

	No. of Pieces	Container Type	Specs. Met		Each
Spring Steel



	2 mm to 6 mm Dia.	520	Plastic Box	DIN 1481	98418A148	000000