About Roller Chain and Sprockets
More
About Gears
More
Machinable-Bore Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 25 Roller Chain (1/4" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 40 | 1/2" | 1 3/8" | 3.33" | 3/4" | 2" | Steel | 0000000 | 000000 |
| 45 | 1/2" | 1 3/8" | 3.73" | 3/4" | 2" | Steel | 0000000 | 00000 |
| 60 | 1/2" | 1 3/8" | 4.92" | 3/4" | 2" | Steel | 0000000 | 00000 |
For ANSI 35 Roller Chain (3/8" Pitch) | ||||||||
| 21 | 1/2" | 1 3/8" | 2.71" | 7/8" | 2" | Steel | 00000000 | 00000 |
| 22 | 1/2" | 1 3/8" | 2.83" | 7/8" | 2" | Steel | 00000000 | 00000 |
| 23 | 1/2" | 1 3/8" | 2.95" | 7/8" | 2" | Steel | 00000000 | 00000 |
| 24 | 1/2" | 1 3/8" | 3.07" | 7/8" | 2" | Steel | 00000000 | 00000 |
| 25 | 1/2" | 1 3/8" | 3.19" | 7/8" | 2" | Steel | 00000000 | 00000 |
| 30 | 1/2" | 1 3/8" | 3.79" | 7/8" | 2" | Steel | 00000000 | 00000 |
For ANSI 40 Roller Chain (1/2" Pitch) | ||||||||
| 16 | 5/8" | 1 3/8" | 2.81" | 7/8" | 2" | Steel | 00000000 | 00000 |
For ANSI 60 Roller Chain (3/4" Pitch) | ||||||||
| 12 | 3/4" | 1 3/8" | 3.25" | 1 1/4" | 2 3/8" | Steel | 00000000 | 00000 |
Machinable-Bore Corrosion-Resistant Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. Made of stainless steel, they withstand washdown conditions and harsh environments.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 35 Roller Chain (3/8" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 24 | 1/2" | 1 3/8" | 3.07" | 7/8" | 2" | 18-8 Stainless Steel | 00000000 | 0000000 |
For ANSI 40 Roller Chain (1/2" Pitch) | ||||||||
| 16 | 5/8" | 1 3/8" | 2.81" | 7/8" | 2" | 18-8 Stainless Steel | 00000000 | 000000 |
For ANSI 60 Roller Chain (3/4" Pitch) | ||||||||
| 12 | 3/4" | 1 3/8" | 3.25" | 1 1/4" | 2 3/8" | 18-8 Stainless Steel | 00000000 | 000000 |
Lightweight Sprockets for ANSI Roller Chain
Made of nylon, these sprockets are lightweight, quiet, and corrosion resistant. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
Sprockets for Double-Strand ANSI Roller Chain
These sprockets come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. All have hardened teeth for increased wear resistance and a long service life.
For technical drawings and 3-D models, click on a part number.
High-Strength Ultra-Quiet Timing Belt Pulleys
Teeth are curved and set in an offset pattern for high strength with 25% less operating noise than pulleys and belts with trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
Press-fit mount pulleys come machined to the for shaft diameter size and are machinable up to the for maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
| OD, mm | Number of Teeth | Pitch, mm | For Shaft Dia. | For Max. Shaft Dia. | Bore Type | Outside Wd., mm | Overall Wd., mm | Pitch Dia., mm | Fabrication | Material | Hub Dia., mm | Each | |
For 32 mm Max. Belt Wd. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 62.23 | 25 | 8 | 1/2" | 1 3/8" | Plain | 33 | 49 | 64 | Cast | Magnesium-Phosphate-Coated Iron | 53.5 | 0000000 | 0000000 |
Plastic Gears and Gear Racks—14 1/2° Pressure Angle
A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of plastic, they run quieter than metal gears and have good corrosion and chemical resistance. They’re also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch.
Gears with machinable bore have a large hub diameter so you can machine them to fit your shaft.
For technical drawings and 3-D models, click on a part number.
Round/Machinable
Bore
Hub | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Pitch  | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Fabrication | Color | Dia. | Wd. | Each | |
Round/Machinable Bore | |||||||||||||
| 12 | 48 | 4" | 4.17" | 3/4" | 1.5" | 1/2"-1 3/8" | Nylon Plastic | Machined | White | 2.5" | 0.75" | 00000000 | 0000000 |