About Gears
More
XL Series Corrosion-Resistant Timing Belt Pulleys
Pulleys are anodized aluminum, which is more corrosion resistant than steel. They are XL series (extra light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
| OD, mm | Number of Teeth | Pitch, mm | For Shaft Dia., mm | Bore Type | Inside Wd., mm | Outside Wd., mm | Overall Wd., mm | Pitch Dia., mm | Fabrication | Material | Hub Dia., mm | Each | |
For 9.5 mm Max. Belt Wd. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
With Hub—Two Flanges | |||||||||||||
| 54 | 30 | 5.080 | 10 | Finished | 11.2 | 14.2 | 23.1 | 48.5 | Machined | Anodized Aluminum | 33 | 00000000 | 000000 |
Metal Worms and Worm Gears
Worm gears use screw threads to make large reductions to shaft speed while transmitting motion at a right angle. They transmit motion from worm to gear and cannot be reversed. For gears and worms to mesh correctly, they must have the same pressure angle and pitch/module. These worms are compatible with plastic worm gears.
Speed ratio is the ratio by which output shaft speed is reduced. As speed decreases, torque increases.
Cast iron gears are strong and durable.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Module | Speed Ratio | Number of Teeth | Pressure Angle | Gear Pitch Dia., mm | For Number of Thread Starts | OD, mm | Face Wd., mm | Overall Wd., mm | For Shaft Dia., mm | Dia., mm | Wd., mm | Material | For Thread Direction | Teeth Heat Treatment | Teeth Fabrication | Each | |
Round Bore—Cast Iron | |||||||||||||||||
| 2 | 20:1 | 20 | 14 1/2° | 40 | 1 | 46 | 22 | 35 | 12 | 33 | 13 | Cast Iron | Right Hand | Not Hardened | Not Ground | 000000000 | 000000 |
| 2 | 10:1 | 20 | 14 1/2° | 40 | 2 | 46 | 22 | 35 | 12 | 33 | 13 | Cast Iron | Right Hand | Not Hardened | Not Ground | 000000000 | 00000 |