About Gears
More
About Roller Chain and Sprockets
More
Sprockets for Miniature Roller Chain
Often used in electronic equipment, instrumentation devices, printers, and other compact machinery, these sprockets are made for use with our miniature roller chain.
Acetal sprockets are lightweight, quiet, and nonconductive. Press fit them onto your shaft.
For technical drawings and 3-D models, click on a part number.
Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
0.1227" Pitch | |||||||
---|---|---|---|---|---|---|---|
15 | 1/4" | 0.65" | 5/16" | 3/8" | Acetal Plastic | 00000000 | 00000 |
Plastic Gears and Gear Racks—14 1/2° Pressure Angle
A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of plastic, they run quieter than metal gears and have good corrosion and chemical resistance. They’re also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch.
Gears with machinable bore have a large hub diameter so you can machine them to fit your shaft.
For technical drawings and 3-D models, click on a part number.
Round/Machinable
Bore
Hub | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gear Pitch | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Fabrication | Color | Dia. | Wd. | Each | |
Round/Machinable Bore | |||||||||||||
20 | 11 | 0.55" | 0.65" | 3/8" | 0.75" | 1/4"-5/16" | Nylon Plastic | Machined | White | 0.406" | 0.375" | 00000000 | 000000 |