About Roller Chain and Sprockets
More
About Gears
More
Sprockets for ANSI Roller Chain
Mount these sprockets onto your shaft and secure with a set screw—no machining necessary.
For technical drawings and 3-D models, click on a part number.
Machinable-Bore Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 35 Roller Chain (3/8" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10 | 3/8" | 9/16" | 1.38" | 3/4" | 31/32" | Steel | 00000000 | 000000 |
Wear-Resistant Sprockets for ANSI Roller Chain
Hardened teeth give these steel sprockets increased wear resistance for a long service life. Mount them onto your shaft and secure with a set screw—no machining necessary.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Sprockets for ANSI Roller Chain
Mount these sprockets onto your shaft and secure with a set screw—no machining necessary. Made of stainless steel, they withstand washdown conditions and harsh environments.
For technical drawings and 3-D models, click on a part number.
Machinable-Bore Corrosion-Resistant Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size. Made of stainless steel, they withstand washdown conditions and harsh environments.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 35 Roller Chain (3/8" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10 | 3/8" | 9/16" | 1.38" | 3/4" | 31/32" | 18-8 Stainless Steel | 00000000 | 000000 |
Lightweight Sprockets for ANSI Roller Chain
Made of nylon, these sprockets are lightweight, quiet, and corrosion resistant. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 35 Roller Chain (3/8" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10 | 3/8" | 7/16" | 1.38" | 3/4" | 31/32" | Nylon Plastic | 000000000 | 000000 |
XL Series Lightweight Timing Belt Pulleys
Acetal and aluminum construction makes these pulleys useful in weight-sensitive applications. All are XL series (extra light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
Hub | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Material | Dia. | Each | |
For 3/8" Max. Belt Wd. | |||||||||||||||
Inch | |||||||||||||||
| 1.38" | 18 | 0.200" | 1/4" | Finished | 0.5" | 0.625" | 0.813" | 1.146" | 2 | Molded | Acetal | Aluminum | 0.75" | 00000000 | 000000 |
Metal Gears and Gear Racks—14 1/2° Pressure Angle
A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of carbon steel, they have high strength and are better than plastic gears and gear racks for high-load, high-speed, and heavy duty applications.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch.
Gears with machinable bore have a large hub diameter so you can machine them to fit your shaft.
Gears with hardened teeth are more wear resistant than gears with teeth that are not hardened. Gears with teeth that are not hardened can be hardened to fit your application. Hardening a gear's teeth increases its wear resistance.
For technical drawings and 3-D models, click on a part number.
Hub | Keyway | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Pitch | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Teeth Heat Treatment | Dia. | Wd. | Wd. | Dp. | Set Screw Thread Size | Each | |
Round/Machinable Bore | |||||||||||||||
| 16 | 20 | 1 1/4" | 1.38" | 1/2" | 0.938" | 1/2"-9/16" | 1144 Carbon Steel | Hardened | 1.063" | 0.438" | __ | __ | __ | 00000000 | 000000 |
| 16 | 20 | 1 1/4" | 1.38" | 1/2" | 0.938" | 1/2"-9/16" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.438" | __ | __ | __ | 0000000 | 00000 |
Keyed Bore with Set Screw | |||||||||||||||
| 16 | 20 | 1 1/4" | 1.38" | 1/2" | 0.938" | 1/2" | 1144 Carbon Steel | Not Hardened | 1.063" | 0.438" | 0.125" | 0.063" | 1/4"-20 | 0000000 | 00000 |
Plastic Gears and Gear Racks—14 1/2° Pressure Angle
A former industry standard, 14½° pressure angle gears are often found on older machinery. Made of plastic, they run quieter than metal gears and have good corrosion and chemical resistance. They’re also known as spur gears.
Combine gears with different numbers of teeth to change speed and torque in your assembly. Combine a gear and rack to convert rotary motion into linear motion.
For components to mesh correctly, they must have the same pressure angle and pitch.
For technical drawings and 3-D models, click on a part number.
Round/Machinable
Bore
Hub | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Gear Pitch | Number of Teeth | Gear Pitch Dia. | OD | Face Wd. | Overall Wd. | For Shaft Dia. | Material | Fabrication | Color | Dia. | Wd. | Each | |
Round Bore | |||||||||||||
| 16 | 20 | 1 1/4" | 1.38" | 19/64" | 0.797" | 1/2" | Nylon Plastic | Molded | White | 0.875" | 0.5" | 00000000 | 000000 |
Gear Rod Stock
Machine your own gears to fit the exact face width and shaft diameter required. Rod stock has teeth with a 20° pressure angle, the current industry standard. 20° pressure angle gears have thicker, stronger teeth than 14½° pressure angle gears. Teeth are not hardened so you can machine and harden them to fit your application. Hardening a gear’s teeth increases its wear resistance. Also known as spur gear rod stock.
For gears to mesh correctly, they must have the same pressure angle and pitch.
For technical drawings and 3-D models, click on a part number.
| Gear Pitch | Number of Teeth | Gear Pitch Dia. | OD | Lg. | For Shaft Dia. | Material | Each | |
| 16 | 20 | 1 1/4" | 1.38" | 1 ft. | 1/32"-11/16" | 1215 Carbon Steel | 0000000 | 000000 |