L Series Timing Belt Pulleys
Pulleys are L series (light) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
Press-Fit Mount
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Hub Dia. | Each | |
For 1/2" Max. Belt Wd. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4.063" | 32 | 0.375" | 1/2" | Plain | 0.563" | 0.75" | 1.625" | 3.82" | 2 | Sintered | Steel | 3.063" | 00000000 | 000000 |
For 3/4" Max. Belt Wd. | ||||||||||||||
| 4.063" | 32 | 0.375" | 5/8" | Plain | 0.813" | 1" | 2" | 3.82" | 2 | Sintered | Steel | 3.063" | 00000000 | 000000 |
For 1" Max. Belt Wd. | ||||||||||||||
| 4.063" | 32 | 0.375" | 5/8" | Plain | 1.063" | 1.25" | 2.25" | 3.82" | 2 | Sintered | Steel | 3.063" | 00000000 | 000000 |
H Series Timing Belt Pulleys
Pulleys are H series (heavy) and have trapezoidal teeth. Select a pulley with a maximum belt width that’s the same or larger than your timing belt width.
For technical drawings and 3-D models, click on a part number.
Press-Fit Mount
| OD | Number of Teeth | Pitch | For Shaft Dia. | Bore Type | Inside Wd. | Outside Wd. | Overall Wd. | Pitch Dia. | Number of Flanges | Fabrication | Material | Hub Dia. | Each | |
For 1 1/2" Max. Belt Wd. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4.063" | 24 | 0.500" | 3/4" | Plain | 1.625" | 1.813" | 2.813" | 3.82" | 2 | Sintered | Steel | 3.125" | 00000000 | 0000000 |
For 2" Max. Belt Wd. | ||||||||||||||
| 4.063" | 24 | 0.500" | 1" | Plain | 2.125" | 2.344" | 3.344" | 3.82" | 2 | Sintered | Steel | 3.125" | 00000000 | 000000 |