About Roller Chain and Sprockets
More
Quick-Disconnect (QD) Bushing-Bore Sprockets for ANSI Roller Chain
The same sprocket can be used with different shaft diameters; choose a compatible quick-disconnect bushing with the bore size you need.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Bushing Style | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 35 Roller Chain (3/8" Pitch) | |||||||
|---|---|---|---|---|---|---|---|
| 36 | SH | 4.51" | 13/16" | 2 11/16" | Steel | 0000000 | 000000 |
| 40 | SH | 4.99" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 45 | SH | 5.59" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 48 | SH | 5.95" | 13/16" | 2 11/16" | Steel | 0000000 | 00000 |
| 60 | SH | 7.38" | 13/16" | 2 11/16" | Steel | 00000000 | 000000 |
For ANSI 40 Roller Chain (1/2" Pitch) | |||||||
| 20 | SH | 3.46" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 21 | SH | 3.62" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 22 | SH | 3.78" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 23 | SH | 3.94" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 24 | SH | 4.1" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 25 | SH | 4.26" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 26 | SH | 4.42" | 13/16" | 2 11/16" | Steel | 0000000 | 00000 |
| 28 | SH | 4.74" | 13/16" | 2 11/16" | Steel | 0000000 | 00000 |
| 30 | SH | 5.06" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 32 | SH | 5.38" | 13/16" | 2 11/16" | Steel | 0000000 | 00000 |
For ANSI 50 Roller Chain (5/8" Pitch) | |||||||
| 17 | SH | 3.72" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 18 | SH | 3.92" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 19 | SH | 4.12" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
For ANSI 60 Roller Chain (3/4" Pitch) | |||||||
| 14 | SH | 3.74" | 13/16" | 2 11/16" | Steel | 000000000 | 00000 |
| 15 | SH | 3.98" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
| 16 | SH | 4.22" | 13/16" | 2 11/16" | Steel | 00000000 | 00000 |
Self-Centering Screw-Clamp Bushings
A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket. They are also good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For technical drawings and 3-D models, click on a part number.
Quick-Disconnect (QD) Weld-On Bushing-Bore Hubs
These weld-on hubs are drilled, tapped, and taper-bored to make any sprocket, pulley, or gear compatible with our Quick-Disconnect (QD) Bushings.
For technical drawings and 3-D models, click on a part number.
| For Bushing Style | OD | Overall Wd. | Material | Each | |
| SH | 3" | 13/16" | Steel | 000000 | 000000 |