Standard Anchor Installation Tools

	Thread Size Thread Size

	Length Length

	Diameter Diameter

	Material Material

Steel

Stainless Steel

Zinc

	For Use In For Use In

	Anchor Type Anchor Type

Female Threaded

Plug

Tapping Screw

	Screw Size Screw Size

	For Thread Depth For Thread Depth

	Minimum Installation Depth Minimum Installation Depth

	Drill Bit Size Drill Bit Size

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Removable Removable

Permanent

Removable

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Pull-Out Strength Pull-Out Strength

1,500 lbs. or greater

	For Thread Diameter (Text) For Thread Diameter (Text)

	Thread Depth Thread Depth

	Shear Strength Shear Strength

2,000 lbs. or greater

	Thread Type Thread Type

UNC

Coil

	Drill Bit Decimal Size Equivalent Drill Bit Decimal Size Equivalent

	Specifications Met Specifications Met

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

	For Maximum Wall Thickness For Maximum Wall Thickness

1/2"

5/8"

1 1/8"

	For Minimum Wall Thickness For Minimum Wall Thickness

58 Products

Installation Tools for Female-Threaded Anchors

Drive these tools with a hammer to expand anchors.

For technical drawings and 3-D models, click on a part number.

Steel
For Thread Diameter	For Thread Depth	Lg.	For Use In		Each
1/2"	13/16"	6 1/16"	Concrete	000000000	00000
1/2"	5/8"	8"	Concrete	000000000	00000
1/4"	3/8"	6"	Concrete	000000000	00000
1/4"	7/16"	4 3/4"	Concrete	000000000	0000
3/4"	1-3/8"	7 1/16"	Concrete	000000000	00000
3/8"	13/32"	8"	Concrete	000000000	00000
3/8"	5/8"	5 5/8"	Concrete	000000000	0000
5/8"	1-3/16"	6 9/16"	Concrete	000000000	0000

Steel Female-Threaded Anchors for Concrete

Anchor

Flanged Anchor

A zinc plating provides corrosion resistance in wet environments. Also known as drop-in anchors, these are often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. Pull-out strength and shear strength values are 25% of the ultimate values for normal-weight concrete.

Anchors can be installed below the base of the surface as well as flush with the surface. Use those with a coil thread to support temporary concrete formwork. Their threads are shallow and widely spaced for quick threading with a compatible rod or bolt.

Flanged anchors are easy to set in holes that are longer than the anchor. They sit flush with the surface when installed.

For technical drawings and 3-D models, click on a part number.

						Strength, lbs.
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Dia.	Thread Dp.	Pull-Out	Shear	Tested In	Specifications Met	Pkg. Qty.		Pkg.
Zinc-Plated Carbon Steel
Anchor with Coil Threads
1/2"-6	2"	5/8"	2"	5/8"	13/16"	1,440	1,600	4,000 psi Concrete	FM Approved, UL Listed	1	000000000	00000
3/4"-4 1/2	3 3/16"	1"	3 3/16"	1"	1 3/8"	2,350	3,920	4,000 psi Concrete	FM Approved, UL Listed	1	000000000	00000
Anchor with UNC Threads
1/4"-20	1"	3/8"	1"	3/8"	7/16"	495	530	4,000 psi Concrete	__	25	000000000	00000
3/8"-16	1 9/16"	1/2"	1 9/16"	1/2"	5/8"	1,045	1,145	4,000 psi Concrete	FM Approved, UL Listed	10	000000000	0000
1/2"-13	2"	5/8"	2"	5/8"	13/16"	1,440	1,600	4,000 psi Concrete	FM Approved, UL Listed	10	000000000	00000
5/8"-11	2 1/2"	7/8"	2 1/2"	7/8"	1 3/16"	1,860	3,095	4,000 psi Concrete	FM Approved, UL Listed	4	000000000	00000
3/4"-10	3 3/16"	1"	3 3/16"	1"	1 3/8"	2,350	3,920	4,000 psi Concrete	FM Approved, UL Listed	1	000000000	0000
Flanged Anchor with UNC Threads
1/4"-20	5/8"	3/8"	5/8"	3/8"	3/8"	285	415	4,000 psi Concrete	FM Approved, UL Listed	10	000000000	0000
1/4"-20	1"	3/8"	1"	3/8"	7/16"	495	530	4,000 psi Concrete	FM Approved, UL Listed	10	000000000	0000
3/8"-16	3/4"	1/2"	3/4"	1/2"	13/32"	530	1,055	4,000 psi Concrete	FM Approved, UL Listed	10	000000000	0000
3/8"-16	1 9/16"	1/2"	1 9/16"	1/2"	5/8"	1,045	1,145	4,000 psi Concrete	FM Approved, UL Listed	10	000000000	0000
1/2"-13	1"	5/8"	1"	5/8"	5/8"	840	1,220	4,000 psi Concrete	FM Approved, UL Listed	1	000000000	0000
1/2"-13	2"	5/8"	2"	5/8"	13/16"	1,440	1,600	4,000 psi Concrete	FM Approved, UL Listed	5	000000000	0000

18-8 Stainless Steel Female-Threaded Anchors for Concrete

These 18-8 stainless steel anchors have good chemical resistance and may be mildly magnetic. Also known as drop-in anchors, they're often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. When installed, anchors sit flush with the surface. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

						Strength, lbs.
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Dia.	Thread Dp.	Pull-Out	Shear	Tested In	Pkg. Qty.		Pkg.
18-8 Stainless Steel
1/4"-20	1"	3/8"	1"	3/8"	7/16"	495	530	4,000 psi Concrete	4	000000000	00000
3/8"-16	1 9/16"	1/2"	1 9/16"	1/2"	5/8"	1,045	1,145	4,000 psi Concrete	1	000000000	0000
1/2"-13	2"	5/8"	2"	5/8"	13/16"	1,440	1,600	4,000 psi Concrete	1	000000000	0000
5/8"-11	2 1/2"	7/8"	2 1/2"	7/8"	1 3/16"	1,860	3,095	4,000 psi Concrete	1	000000000	00000
3/4"-10	3 3/16"	1"	3 3/16"	1"	1 3/8"	2,350	3,920	4,000 psi Concrete	1	000000000	00000

Super-Corrosion-Resistant 316 Stainless Steel Female-Threaded Anchors for Concrete

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water and may be mildly magnetic. Also known as drop-in anchors, they're often used for overhead applications because the anchor's internal plug expands in four directions to hold the anchor firmly inside the hole before inserting a threaded rod or bolt. To install, place the anchor into the hole, insert the required installation tool (sold separately) into the anchor, and drive with a hammer until the thicker portion of the tool makes contact with the anchor. When installed, anchors sit flush with the surface. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

						Strength, lbs.
Thread Size	Lg.	Drill Bit Size	Min. Installation Dp.	Dia.	Thread Dp.	Pull-Out	Shear	Tested In	Pkg. Qty.		Pkg.
316 Stainless Steel
1/4"-20	1"	3/8"	1"	3/8"	7/16"	495	530	4,000 psi Concrete	1	000000000	00000
3/8"-16	1 9/16"	1/2"	1 9/16"	1/2"	5/8"	1,045	1,145	4,000 psi Concrete	1	000000000	0000
1/2"-13	2"	5/8"	2"	5/8"	13/16"	1,440	1,600	4,000 psi Concrete	1	000000000	00000
5/8"-11	2 1/2"	7/8"	2 1/2"	7/8"	1 3/16"	1,860	3,095	4,000 psi Concrete	1	000000000	00000
3/4"-10	3 3/16"	1"	3 3/16"	1"	1 3/8"	2,350	3,920	4,000 psi Concrete	1	000000000	00000

Installation Tools for Shallow-Hole Female-Threaded Anchors

Drive these tools with a hammer to expand anchors.

For technical drawings and 3-D models, click on a part number.

Zinc-Plated Steel
For Thread Size	Lg.		Each
8-32	2 15/16"	000000000	00000
10-24	3 1/4"	000000000	0000
1/4"-20	3 3/4"	000000000	0000
5/16"-18	4 3/8"	000000000	0000
3/8"-16	4 5/8"	000000000	0000
1/2"-13	5"	000000000	00000
3/4"-10	6 1/2"	000000000	00000

Quickset Installation Tools for Shallow-Hole Female-Threaded Anchors

The fastest way to install shallow-hole female-threaded anchors. To use, insert the tip of the tool into the anchor and turn the tool with a power drill.

For technical drawings and 3-D models, click on a part number.

Zinc-Plated Steel
For Thread Size		Each
10-24	000000000	000000
1/4"-20	000000000	00000
3/8"-16	000000000	00000

Adjustable-Depth Installation Tools for Shallow-Hole Female-Threaded Anchors

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

For technical drawings and 3-D models, click on a part number.

	Lg.
For Thread Size	Open	Closed		Each
Alloy Steel
1/4"-20	2 1/4"	2"	000000000	0000000
3/8"-16	2 3/4"	2 1/4"	000000000	000000

Shallow-Hole Female-Threaded Anchors for Block and Brick

Also known as caulk-in anchors, these stay secure when there's not much material to hold. When installed, the cone expands the sleeve to hold it firmly inside the hole. To install, insert the anchor cone end first and use an installation tool to drive the sleeve over the cone. Then, insert a screw or threaded rod and tighten. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

Anchors

						Strength, lbs.
Thread Size	Lg.	Min. Installation Dp.	Drill Bit Size	Dia.	Sleeve Material	Pull-Out	Shear	Tested In	For Use In	Pkg. Qty.		Pkg.
Zinc Alloy
8-32	9/16"	1/2"	5/16"	5/16"	Lead	85	85	4,000 psi Concrete	Block, Brick, Concrete	25	000000000	000000
10-24	3/4"	5/8"	3/8"	3/8"	Lead	230	220	4,000 psi Concrete	Block, Brick, Concrete	25	000000000	00000
1/4"-20	7/8"	7/8"	1/2"	1/2"	Lead	370	350	4,000 psi Concrete	Block, Brick, Concrete	25	000000000	0000
5/16"-18	1"	1"	5/8"	5/8"	Lead	470	500	4,000 psi Concrete	Block, Brick, Concrete	10	000000000	00000
3/8"-16	1 1/4"	1 1/4"	3/4"	3/4"	Lead	600	820	4,000 psi Concrete	Block, Brick, Concrete	5	000000000	0000
1/2"-13	1 9/16"	1 1/2"	7/8"	7/8"	Lead	850	1,100	4,000 psi Concrete	Block, Brick, Concrete	5	000000000	00000
5/8"-11	1 7/8"	2"	1 1/8"	1 1/8"	Lead	970	1,500	4,000 psi Concrete	Block, Brick, Concrete	1	000000000	0000
3/4"-10	2"	2 1/2"	1 1/4"	1 1/4"	Lead	1,400	1,900	4,000 psi Concrete	Block, Brick, Concrete	1	000000000	0000

Installation Tools

Drive these tools with a hammer to expand anchors.

Zinc-Plated Steel
For Thread Size	Lg.		Each
8-32	2 15/16"	000000000	00000
10-24	3 1/4"	000000000	0000
1/4"-20	3 3/4"	000000000	0000
5/16"-18	4 3/8"	000000000	0000
3/8"-16	4 5/8"	000000000	0000
1/2"-13	5"	000000000	00000
3/4"-10	6 1/2"	000000000	00000

Adjustable-Depth Installation Tools

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

	Lg.
For Thread Size	Open	Closed		Each
Alloy Steel
1/4"-20	2 1/4"	2"	000000000	0000000
3/8"-16	2 3/4"	2 1/4"	000000000	000000

Quickset Installation Tools

The fastest way to install shallow-hole female-threaded anchors. To use, insert the tip of the tool into the anchor and turn the tool with a power drill.

Zinc-Plated Steel
For Thread Size		Each
10-24	000000000	000000
1/4"-20	000000000	00000
3/8"-16	000000000	00000

Removable-Screw Anchors for Drywall, Plaster, and Wood Paneling

A drilled hole is required for installation. Screws can be removed repeatedly without affecting the anchor. To install, tap the anchor into the material until flush. Insert a screw and turn it to expand the anchor. For high volume tasks, use the optional installation tool—it doesn't require any twisting. Pull-out strength and shear strength values are 25% of the ultimate values.

For technical drawings and 3-D models, click on a part number.

					Strength, lbs.
Thread Size	Screw Lg.	Lg.	Drill Bit Size	For Wall Thick.	Pull-Out	Shear	Tested In	Drive Style	Pkg. Qty.		Pkg.
Zinc-Plated Steel
6-32	1 3/4"	1 1/2"	5/16"	5/8"-1"	20	30lbs.	3/8" Drywall	Phillips	25	000000000	000000
10-24	2"	1 3/4"	3/8"	3/8"-5/8"	25	35lbs.	3/8" Drywall	Phillips	10	000000000	00000
10-24	2 1/2"	2 1/4"	3/8"	3/4"-1 1/8"	25	35lbs.	3/8" Drywall	Phillips	10	000000000	0000
1/4"-20	2 1/4"	2 1/8"	7/16"	3/8"-1/2"	25	40lbs.	3/8" Drywall	Phillips	10	000000000	00000
1/4"-20	2 3/4"	2 5/8"	7/16"	5/8"-1 1/8"	25	40lbs.	3/8" Drywall	Phillips	10	000000000	0000

Optional Installation Tool

000000000

Each

000000

Removable-Screw Anchor Assortments for Drywall, Plaster, and Wood Paneling


	Drill-In
	Hammer-In

Use these light duty anchors to hold 20 lbs. or less. Once installed, screws can be removed repeatedly without affecting the anchor. Install flush with the surface. Then, thread the screw through your fixture, into the anchor, and tighten. For high volume tasks, use an optional installation tool—it doesn't require any twisting.

Steel
Number of Pieces	Hammer-In Drywall Anchors Included	Drill-In Drywall Anchors Included	Container Type		Each
230	6-32 × 1 5/16" (50 Pieces) 6-32 × 1 11/16" (25 Pieces) 6-32 × 2 1/4" (25 Pieces)	6-32 × 1" (25 Pieces) 6-32 × 1 1/2" (25 Pieces) 6-32 × 2" (25 Pieces) 6-32 × 2 1/2" (20 Pieces) 10-24 × 2 1/4" (10 Pieces) 10-24 × 2 3/4" (10 Pieces) 1/4"-20 × 2 1/4" (10 Pieces) 1/4"-20 × 2 3/4" (5 Pieces)	Plastic Box	000000000	0000000

Optional Installation Tool

000000000

Each

000000