High-Capacity Roller Conveyors
For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors. Whether you’re creating a straight line, a curve to route items around equipment, or a decline to lower them into a truck trailer, mixing and matching conveyors and stands lets you customize your system as needed. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes.
Because these conveyors don’t run on electricity, their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch. However, these high-capacity conveyors weigh about twice as much as standard ones, so they require more effort to move around.
Choose a small roller spacing when conveying small items to prevent them from getting stuck between rollers. For large items, a large roller spacing helps minimize friction between your material and the rollers.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/574/5746k166p2-e01d-digital@halfx_636876582950084310.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18--248003798341557324557-p9@halfx_636929033594695634.png?ver=imagenotfound)
Wd. | ||||||||
---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Radius | Roller Projection | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1.9" Dia. Steel Rollers—7/16" Hex Axle | ||||||||
16" | 13" | 32 1/2" | 1/4" | 3 1/2" | 620 lbs./ft. (3) | None | 00000000 | 0000000 |
18" | 15" | 32 1/2" | 1/4" | 3 1/2" | 620 lbs./ft. (3) | None | 00000000 | 000000 |
20" | 17" | 32 1/2" | 1/4" | 3 1/2" | 620 lbs./ft. (3) | None | 00000000 | 000000 |
24" | 21" | 32 1/2" | 1/4" | 3 1/2" | 620 lbs./ft. (3) | None | 00000000 | 000000 |
30" | 27" | 32 1/2" | 1/4" | 3 1/2" | 620 lbs./ft. (3) | None | 00000000 | 000000 |
36" | 33" | 48" | 1/4" | 3 1/2" | 620 lbs./ft. (3) | None | 00000000 | 00000000 |
High-Capacity Large-Diameter Roller Conveyors
For more demanding shipping and assembly applications, these conveyors can carry heavy loads.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/574/5746k166p2-e01d-digital@halfx_636876582950084310.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18--248003798341557324557-p9@halfx_636929033594695634.png?ver=imagenotfound)
Wd. | |||||||
---|---|---|---|---|---|---|---|
O'all | Between Frame | Radius | Cap. (No. of Stands Required) | No. of Stands Included | Features | Each | |
2 1/2" Dia. Steel Rollers—11/16" Hex Axle | |||||||
12" | 9" | 32 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 0000000 |
16" | 13" | 32 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 000000 |
18" | 15" | 32 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 000000 |
20" | 17" | 32 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 000000 |
24" | 21" | 32 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 000000 |
30" | 27" | 32 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 00000000 |
34" | 31" | 48" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 00000000 |
52" | 49" | 49 1/2" | 800 lbs./ft. (3) | None | Connecting Plates | 0000000 | 00000000 |
Roller Conveyors
Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go. These conveyors have rollers that transfer items with flat or uneven bottoms, such as boxes or shipping tubes. They’re more durable and carry heavier loads than belt and skate wheel conveyors.
These conveyors don’t run on electricity, so their rollers require momentum from gravity, a push, or a powered conveyor to move. Since they’re not wired, they’re quick to set up and easy to maintain. This makes them handy if another conveyor unexpectedly shuts down or you need to extend an existing line in a pinch.
Curved and straight conveyors have connecting hooks to attach conveyor sections together.
Galvanized steel conveyors carry heavier loads than aluminum conveyors. Aluminum conveyors are roughly half the weight of steel conveyors, so they’re easier to install.
Note: Capacities are based on an evenly distributed load. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/58245k11-5825k751591907518@halfx_637274863534015363.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/582/58245k11-@halfx_637274850369140531.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/901/901591980270-p9@halfx_637275596793549897.png?ver=imagenotfound)
Wd. | |||||||
---|---|---|---|---|---|---|---|
O'all | Between Frame | Radius | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 3/8" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
8" | 6" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 0000000 |
12" | 10" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
15" | 13" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
18" | 16" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
24" | 22" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
26" | 24" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
1 3/8" Dia. Aluminum Rollers—1/4" Round Axle | |||||||
8" | 6" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 0000000 | 000000 |
12" | 10" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 00000000 | 000000 |
15" | 13" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 00000000 | 000000 |
18" | 16" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 00000000 | 000000 |
24" | 22" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 00000000 | 000000 |
26" | 24" | 36" | 2 1/2" | 100 lbs./ft. (3) | None | 0000000 | 000000 |
1.9" Dia. Galvanized Steel Rollers—1/4" Round Axle | |||||||
8" | 6" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
12" | 10" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
15" | 13" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
18" | 16" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
24" | 22" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
26" | 24" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
30" | 28" | 36" | 2 1/2" | 200 lbs./ft. (3) | None | 0000000 | 000000 |
Stainless Steel Roller Conveyors
Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/581/5811k41p2-e01d-digital@halfx_636876547557783453.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18--248003798341557324557-p9@halfx_636929033594695634.png?ver=imagenotfound)
Wd. | ||||||||
---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Radius | Roller Projection | Frame Ht. | Cap. (No. of Stands Required) | No. of Stands Included | Each | |
1 5/8" Dia. Stainless Steel Rollers—7/16" Hex Axle | ||||||||
12" | 10" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 000000000 |
18" | 16" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
24" | 22" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
26" | 24" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
30" | 28" | 36" | 5/16" | 2 1/2" | 235 lbs./ft. (3) | None | 0000000 | 00000000 |
Replacement Bearing | 0000000 | Each | 000000 |
Motorized Roller Conveyors
Also known as line-shaft conveyors, these are driven by a drive shaft and round belts. The drive shaft continues to run even when the accumulation of packages may cause some rollers to stop turning. Conveyors can be hardwired for material flow in either direction. Only straight conveyor sections contain a motor and can power up to 60 ft. of conveyor extensions on either side.
90° curved conveyor extensions have tapered rollers that keep packages centered.
Note: Capacities are based on an evenly distributed load. Use a stand at each end for straight conveyors and extensions. Add an additional stand in the center to increase capacity. For 90° curved conveyor extensions, use a stand at each end plus a stand in the center. Connected conveyor sections share a stand. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18p1-e01d-digital@halfx_636876649296640037.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/for/for-between-frame-width--20985190eaa1558033065-p9@halfx_636936118722255018.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k18--248003798341557324557-p9@halfx_636929033594695634.png?ver=imagenotfound)
Wd. | Ht. | No. of Stands | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
O'all | Between Frame | Roller Projection | Frame | O'all | Cap., lbs./ft. | Required | Included | Features | Each | |
1.9" Dia. Galvanized Steel Rollers—7/16" Hex Axle | ||||||||||
16" | 13" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 000000000 |
19" | 16" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
25" | 22" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
35" | 32" | 1/4" | 5 1/2" | 36"-48" | 60 | 3 | 1 | Connecting Plates | 0000000 | 00000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k781p1-e01d-digital@halfx_636876691706584155.png?ver=imagenotfound)
Conveyor Mount. Slot | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Conveyor Mount. Fasteners Included | No. of Conveyor Mount. Holes | Lg. | Wd. | Mount. Hole Ctr.-to-Ctr. | Floor Mount. Fasteners Included | No. of Floor Mount. Holes | Floor Mount. Hole Dia. | Each | |
For 16" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 0000000 |
For 19" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
For 25" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
For 35" Overall Wd. | ||||||||||
30 1/4" to 42 1/4" | Yes | 4 | 1" | 7/16" | 4" | No | 4 | 9/16" | 00000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/589/5898k911p1-e01d-digital@halfx_636876633192436522.png?ver=imagenotfound)
Component | Each | |
Drive Belt for Curved Section | 00000000 | 00000 |
High-Capacity Stainless Steel Roller Conveyors
For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a 10-ft. straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Bench-Top Roller Conveyors
Designed to rest on a work surface, these conveyors have two sets of axle holes so you can position the conveying surface 1/8" above the frame or 3/4" below the frame (position below to use the frame as a guide rail).
Galvanized steel conveyors are stronger than aluminum and have some corrosion resistance.
Note: Capacities are based on an evenly distributed load. The length of the material you're conveying should be at least three times the roller spacing.
For technical drawings and 3-D models, click on a part number.
Skate Wheel Conveyors
Skate wheel conveyors are for light duty loading and unloading of flat-bottom objects.
Steel is stronger than aluminum and provides some corrosion resistance. Aluminum is lighter than steel with better corrosion resistance. Plastic is nonmarring.
Note: Capacities are based on an evenly distributed load with at least one stand at each end for straight conveyors, and an additional stand in the center for curved conveyors. You can increase the capacity of a straight conveyor by adding a stand in the center. The length of the material you’re conveying should be at least three times the axle spacing.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/567/56755k911-@halfx_636951553373210705.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/567/56755k921p11552078123-p9@halfx_636693395598627142.png?ver=imagenotfound)
Wheel | No. of Stands | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all Wd. | Radius | Dia. | Spacing | Projection | Color | Axle Dia. | No. of Wheels per Axle | Frame Ht. | Required | Included | Each | |
Zinc-Plated Steel Wheels with Galvanized Steel Frame | ||||||||||||
12" | 36" | 1.9" | 3" | 3/8" | __ | 1/4" | 2, 3 | 2 1/2" | 3 | None | 000000000 | 0000000 |
15" | 33" | 1.9" | 3" | 3/8" | __ | 1/4" | 2, 3 | 2 1/2" | 3 | None | 000000000 | 000000 |
18" | 30" | 1.9" | 3" | 3/8" | __ | 1/4" | 3, 4 | 2 1/2" | 3 | None | 000000000 | 000000 |
24" | 36" | 1.9" | 3" | 3/8" | __ | 1/4" | 6 | 2 1/2" | 3 | None | 000000000 | 000000 |
Aluminum Wheels with Aluminum Frame | ||||||||||||
12" | 36" | 1.9" | 3" | 3/8" | __ | 1/4" | 2, 3 | 2 1/2" | 3 | None | 00000000 | 000000 |
15" | 33" | 1.9" | 3" | 3/8" | __ | 1/4" | 2, 3 | 2 1/2" | 3 | None | 00000000 | 000000 |
18" | 30" | 1.9" | 3" | 3/8" | __ | 1/4" | 3, 4 | 2 1/2" | 3 | None | 00000000 | 000000 |
24" | 36" | 1.9" | 3" | 3/8" | __ | 1/4" | 6 | 2 1/2" | 3 | None | 00000000 | 000000 |
Nylon Plastic Wheels with Galvanized Steel Frame | ||||||||||||
12" | 36" | 1.9" | 3" | 3/8" | Black | 1/4" | 2, 3 | 2 1/2" | 3 | None | 000000000 | 000000 |
15" | 33" | 1.9" | 3" | 3/8" | Black | 1/4" | 2, 3 | 2 1/2" | 3 | None | 000000000 | 000000 |
18" | 30" | 1.9" | 3" | 3/8" | Black | 1/4" | 3, 4 | 2 1/2" | 3 | None | 000000000 | 000000 |
24" | 36" | 1.9" | 3" | 3/8" | Black | 1/4" | 6 | 2 1/2" | 3 | None | 000000000 | 000000 |